Rope to Chain Splice | 3 Strand

Подписаться 114 тыс.

Просмотров 4,4 тыс.

50% 1

In this video, Evan gives a detailed explanation of how to create a chain splice with our 3 strand nylon rope.
Splicing Tips / Common Questions...
Where do I get splicing tools? - rightrope.com/use/tools/
Where do I get the rope in this video? - rightrope.com/product/nylon-r...
Some highlights about the rope used in this video -
- High strength
- Good stretch
- UV resistant
- Abrasion resistant
- Long lasting
Things you should know about 3 strand nylon rope -
Nylon is slightly stronger, and much more elastic or given to stretch than polyester. This can be an advantage or disadvantage depending on your application. If you need a high-stretch rope go with nylon.
Polyester has better abrasion resistance and UV resistance than nylon, but much less elasticity. If you need a low stretch, durable rope, go with 3 Strand Polyester instead of this nylon. - rightrope.com/product/3-stran...
Times -
0:00 | Intro
0:15 | Disclaimer and tools
0:39 | Count back 13 picks
1:05 | Unravel your strands
1:16 | How your rope lays in the chain
1:30 | Orient rope into chain
1:58 | Begin your back splice
4:59 | Finished chain splice
5:01 | Outro
At #RightRope, all of our ropes are in stock and ready to go. We offer fast, same-day shipping on all of our products. When you shop RightRope, you can be sure you’re getting the right rope at the right price.
Our Website - rightrope.com
Like us on Facebook - profile.php?...
Follow us on Instagram - / right.rope.home
Email us at - info@rightrope.com
Call us at - (616) 577-5105

Опубликовано:

20 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 18

@TBE.LLC. 8 месяцев назад

That was really cool 😮😮😮

@andrewjones6544 4 месяца назад

If you use a longer splice after 5 tucks you can cut the number of yarns in each strand to reduce the diameter of the splice in order to produce a tapered lead into the the windlass

@unclewilbur8976 8 месяцев назад

One more detail to remember with all three strand splices: *Massage the splice.* One way to "massage the splice" is to lay the splice on the dock, put your foot on top and roll the splice back and forth with some vigor for a few seconds. This will work the tension in the strands and fibers into an even state throughout the splice. It's a small detail that makes a big difference. The tucked ends will often slip back into the splice leaving the ends approximately ⅛" to ¼" shorter, but that's to be expected. Now your splice is in an ideal state of evenness throughout. Now is the time to cut the bitter ends of the splice. I do this several ways, depending on the specific application, so I won't describe that now. If you're concerned about getting dirt on your beautiful white line, lay a towel on the splice to keep it clean.

@rickcarpenter4518 2 месяца назад

Good video. What do you recommend to mitigate against chafing/abrasion where the strands wrap around the chain link? Do you recommend this approach over splicing in a thimble and using a shackle? I always whip where the strands exit for added security.

@prakasavigraha6104 4 месяца назад

Valeu a pena!

@unclewilbur8976 8 месяцев назад

Untapered splices won't work in most windlasses. _So, this would have been a great time to demonstrate a three strand taper._ 😊 And counting 13 strands (for the tucks) will often leave you just a little too short for a secure splice, and a strand could work its way back out of it's tuck. When you're dealing with boats, expect everything to go wrong. *_So, I always consider every detail._* But this is a very good demonstration for beginners because it is not intimidating. 😊

@BurchellAtTheWharf 8 месяцев назад

Yess, I do my tapers in the by3 step The full three stands, tucked 3 times Cut one off Tuck the 2 stands 3 more times Cut one then tuck the Last one 3 more times an nip of any extra. Works great on the fishing boat fer the lobster trap ropes

@BurchellAtTheWharf 8 месяцев назад

Wish i could be here to watch this, might i ask if there is a secret to the thimble eye splice??

@BurchellAtTheWharf 8 месяцев назад

This is a new lesson fer a way to splice a rope to a chain

@jase1911 8 месяцев назад

Why 13 and not more for added security???

@BurchellAtTheWharf 8 месяцев назад

You only need 4 tucks for a secure splice

@MikeJ3. 8 месяцев назад

In the Barge towing industry we use 3 tucks and in my 18 years as a boat captain I've never seen a splice fail before the line breaks, just a tid bit of info!

@BurchellAtTheWharf 8 месяцев назад

@MikeJ3. ahah, yess, a confident rope worker can make 3 tucks work for a life time, but a new to the ropes person should have four, but yea never need any more But eye like to taper mine down over sets of three, so it goes threw the lobster trap hauler more smoothly