Rough Idle No CHECK ENGINE LIGHT~~~~ 15 minute FIX

Подписаться 47 тыс.

Просмотров 992 тыс.

50% 1

Rough Idle No CHECK ENGINE LIGHT~~~~ EASY FIX, In this video i will show you how to repair your low idle problem quick and easy.
IF YOU ENJOY MY CONTENT BUY ME A CUP OF COFFEE -- www.buymeacoff...
BUY QUALITY TOOLS @ DISCOUNT PRICES--jbtools.sjv.io...
ADVANCE AUTO PARTS --advanceautopar...
APPAREL-- / @autorepairtips757
HEALTHY LIVING--betterbrandhea...
AUTO SCANNER---amzn.to/31ZNw2n
INSTAGRAM- / auto_repair_tips
HELP SUPPORT THE CHANNEL-www.paypal.com...
Here are my suggested tools every mechanic should own
Compression Tester Kit: amzn.to/377J6tH
Custom Bushing Driver Tool Set: amzn.to/2FnrwX5
FWD Front Wheel Drive Bearing Adapters: amzn.to/3jRU2Pn
Slide Hammer: amzn.to/36ZjbUO
Bearing Race and Seal Bushing Driver Set: amzn.to/310ZqID
Ball Joint Press: amzn.to/3iSTcR2
Heavy Duty Ball Joint Press: amzn.to/34OuLPT
Blind Hole Collet Bearing Race and Seal Puller Extractor Kit: amzn.to/33RiZoP
5 Ton Bearing Puller: amzn.to/2SMaYuG
Disc Brake Caliper Tool Kit: amzn.to/3nISg5D
R134A AC Gauge Set: amzn.to/2SKtUKy
Polaris Razor Windshield: amzn.to/3djIDW6
Fuel Line Quick Connect/Disconnect Kit: amzn.to/2SLnjj1
M14x1.5 Lug Nuts Black with Spline Tuner: amzn.to/3k6dGrj
Ball Joint Separator: amzn.to/30Zpc06
8-Piece AC Gauge Hose Conversion Adapters: amzn.to/3nF6sg5
Valve Spring Compressor: amzn.to/3iRWswh
Toyota Camry Sun Visor: amzn.to/3lFNsvX
80-Piece SAE & Metric Tap and Die Set: amzn.to/2Io0KyV
Macpherson Strut Coil Spring Compressor: amzn.to/3lRmEcr
Fuel Injection Pressure Tester Gauge Tool: amzn.to/33SbeyY
Motorcycle Scissor Lift Jack Stand: amzn.to/2GYcbfU
Truck Cargo Net: amzn.to/312IHF3
5-in-1 Ball Joint Separator: amzn.to/2GYCqD8
Hose Clamp Pliers: amzn.to/2H1Jb7a
All links are affiliate links
Subscribe to my channel for free help on auto repairs / @autorepairtips757
************************************************************************

Опубликовано:

21 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 532

@g-rock6329 2 года назад

I think you just helped me fix my blazer!! Thank you very much!!

@woodmeerkat8884 Год назад

Mine have a rough idle and then will shut if no matter what. I can prolong it by pumping the gas but that's all

@ericg4915 Год назад

@wood meerkat do you have a code?

@joshlillpop5595 Год назад

I had a blazer, this is a must every six months.

@victormatias5863 5 месяцев назад

😂😂

@samsback6748 6 месяцев назад

This guy is a genius, I’m a DIY person and my car ran rough at idle with no check engine lights at all. The car was also very very snappy when you would accelerate so I cleaned the throttle body and I can’t even feel the motor at idle and it’s a very easy smooth takeoff instead of a jerky take off.

@AutoRepairTips757 6 месяцев назад

Glad it helped you. Thanks for watching.

@mckennaanthony9564 Год назад

Wish I had seen the video sooner , I spent over $200.00 on sensors then did what you said. THANK YOU!!! YOU ARE THE MAN!!

@LaPlasita47 6 месяцев назад

At least your sensors will be good for awhile

@itsjustmeMike527 6 месяцев назад

Thanks! I'll try this on my 2000 Mustang. I just want to say that you have a no-nonsense way of explaining things. It's refreshing.

@carloszamorano3232 Год назад

Had months of not knowing the problem for my 2014 gmc sierra and this video was the only one that helped me fix my idling and vibrating problem! You just saved me big bucks of not taking it to a shop thank you sir and god bless you!

@AutoRepairTips757 Год назад

Glade it helped you

@LastTrump7 3 месяца назад

@@AutoRepairTips757if that throttle is a newer computer controlled one…moving that throttle body will mess the computer system up. You can spray throttle body clearner into it and that should be done with someone inside with the car cranked and giving it some gas while you are spraying it.

@DJKT_official 2 месяца назад

I wish I had found this sooner, I have a 2014 dodge avenger with this exact problem. Have been ripped off for so much money trying to get it fixed and end up replacing things that didn’t even have anything to do with the issue. I appreciate you sharing honest and straight forward info. I fix a lot of stuff DIY on my car, but this was one thing both my brother and I just couldn’t figure out.

@tomjones2348 6 месяцев назад

Wow! A real mechanic! I haven't seen one of those since I moved to Florida! Great tip.

@AutoRepairTips757 6 месяцев назад

Thanks 👍

@Paul-Mac 5 месяцев назад

Daughter has a 2011 Suburban that idles rough and tries not to start, intermittently, no codes, good fuel pressure, sounds like this is worth a shot! Good enough to get a like and sub from me, thanks for the tip!

@outsidewhenpossible5242 2 года назад

Just tried the fix on my ‘14 cr v. Seems like it worked. Thanks

@donwalters1294 8 месяцев назад

Mine just started and gonna try this. Just got the ABS working on it through your videos. Ty

@SoCal_ayyayyron 9 месяцев назад

I like that you are using an M4 cleaning brush. That is a classy touch! I'm going to repurpose mine to use with my throttle body.

@spelunkerd 2 года назад

That's good advice, I didn't know I could cause harm with the cleaner. Some shops are selling an intake clean for engines with direct injection, which basically sprays a mist of cleaner into the intake, while running, to loosen caked debris on the sidewall leading to the top of the intake valve. I've often wondered if flakes of hard carbon might cause a problem inside the cylinder if they are swept in with the cleaner. It seems a little safer to wait for a time when the intake is off to do that kind of intake cleaning, where one can have a little better control.

@johnharrison5656 Год назад

That’s a valid concern, and I agree that removing the heads, and doing a valve job is best! The hot flakes falling into the cylinder from the valve, would cause premature detonation of the fuel. By spraying the cleaner, you really don’t know how much of the carbon is removed. Mostly, it would loosen the deposits enough to cause knock more frequently leading to a host of other potential issues. It might could be beneficial if it was done as a preventative measure, but I definitely wouldn’t try it on a vehicle that is already having problems from carbon buildup. With direct injection, the best offense is a good defense. Always run higher octane gas from the start.

@peteranania7166 Год назад

This fixed my rough idle on my 2012 Dodge Grand Caravan. Thanks!

@AutoRepairTips757 Год назад

glade it worked

@billbates7810 Год назад

Great video, no waffle, concise clear information, ten out of ten ! God bless, Bill.

@AutoRepairTips757 Год назад

thanks

@thepowerofcompressedair185 2 года назад

Thanks for the tip. Hope it works. Got a 98 ranger that sat for almost a year. Replaced the fuel filter, all 8 plugs, wires, and both coils. New Air filter, fresh oil change and it runs great while running but it has that rough idle with no engine light. I was thinking MAF sensor or something, but forgot about the Throttle body.

@karlstinger 2 года назад

Did it work?

@treishtrei 2 года назад

Did it work?

@thepowerofcompressedair185 2 года назад

@@treishtrei turned our to be a vacuum leak. The link under the coil packs. Are your ac regulator doors working?

@trip7854 Год назад

You have a V8 ranger? 👊

@thepowerofcompressedair185 Год назад

@@trip7854 those model 2.5 engines have plugs on both sides of the head. 2 per cylinder.

@orinmangar2333 Год назад

If you gently move the throttle plate/butterfly, you should do no damage. Just don't let it snap back after you fully open it. Also, I would use a plastic tool to hold it open, not a metal screwdriver.

@neerajchopra6809 2 года назад

Very captivating narration and content . An amazing video . Gained tremendous insights .

@AutoRepairTips757 2 года назад

Thanks

@Birdwatching754 6 месяцев назад

Great info. Probably good maintenance to do yearly.

@alphacentauri2506 7 месяцев назад

Thanks for this info! Can you share how to fix A Shift light problem and what causes it? This is on a jeep Cherokee 2017. All of the lights went on the gear shift console and the dashboard displayed the shift warning.

@terrapinflyer273 2 года назад

Be careful! W some vehicles people have told me to never move the butterfly valve manually. This can somehow screw up the throttle body sensor or damage it because of the way it's built and takes readings. You may also need to perform an idle reset after any of this. Which sometimes can be a quick DIY procedure involving a gas pedal and ignition combo, followed by a bit of highway driving. I'm taking mine to the shop lol.

@AutoRepairTips757 2 года назад

As long as your car is in the off position you should not have any issues I’ve done all kinds of cars doing it this way. as long as that keys off You should not have a problem

@All_praise4Allah 2 года назад

It wont hurt it. Ive always done it with all vehicles. As long as its off. If its running have someone press the accelerator or use your finger to pull the cable

@austindacosta6498 2 года назад

Here’s the thing, if it’s a older car and it has a manual throttle body with the cable you can pull on to increase the idle speed and a IAC tps and all that crap on it, it’s okay to handle with your hands. If it’s a newer model and has a all electric throttle body where it’s just the black computerized part on the side, and that’s it. Then do NOT stick your hand in it. Even with the battery unplugged those things can hold power, and there have been stories of them flipping out when being touched and snapping shut, which would take your fingers right off

@cameron4437 Год назад

I just remove it completely and clean

@10thAveFreezeOut Год назад

@@austindacosta6498 It has a tiny, weak little motor that moves it. It couldn't hurt a fly. It can get broken by being moved manually though.

@jlalvarado024 2 года назад

I would remove the throttle body before doing any cleaning because you don't want any debris going into your engine causing other issues.

@benanza9 2 года назад

I thought so too

@KronicDaydreamZ 2 года назад

That would make sense

@AutoRepairTips757 2 года назад

removing the throttle body is an extra step that's not needed, the ring that normally builds up can be wiped off with no issue. and if there is any debris they are so micro that it would not hurt anything, by doing it this way you can get 99.9% of it with out removing it.

@jgeoffrey1 2 года назад

Make a video then

@kingoftheburbskc Год назад

Juan can you show us a video of the removal? Didn't think so

@mainesstation2609 10 месяцев назад

Awesome. Very well spoken with all teaching in order thank you..

@AutoRepairTips757 10 месяцев назад

Glad it was helpful!

@RickRamo 4 месяца назад

Thanks, I have a 2011 Buick enclave. I bought it at auction in April. It took the state a month to get back with title. So now I have tag, title, insurance. And have thoroughly enjoyed prowling around the neighborhood late night to get a feel for it. So, the problem. The what appears to be usual abs light. So, I have not gotten around to figuring which wheel the error is coming from. Back to the low idle. I was coming back from an event on the highway, on exiting back to city streets. A wide gentle curve from exit to city street and at the absolute worst possible time the engine died and the pig nearly coasted into a lane of cars waiting at the light. I quickly threw it into neutral and hit the key, it started up with a brake light I had not seen before on the dash. Got back to the house off loaded some groceries and took a well deserved whizz. Started the Buick back up again. No brake light. I think I got off extremely light. Anyway, I moved that hose out the throttle body and mass air flow sensor thing up from "around to it" to first thing in the morning before it gets hot out. I think I am about due for a cheap OBDII reader to arrive tomorrow as well. Added to the mix, I had dumped a jug of crc catalytic converter cleaner on top of a quarter tank, did the obligatory 15 miles of normal driving. Filled up and went to the event, stopped at a store and got a bag of late night stuff. Hit the road and had the Buick jump up and shout boo at me. I am interested in what I will find with an OBDII code reader.

@AutoRepairTips757 4 месяца назад

I’m curious to what you’ll find. Give us an update once your scanner comes in.

@DjCashMoney767 Год назад

I have a rough idle at stops also, and even worst when i have my Light on. i have cleaned my throttle body and i have the same result. i considered my Idle air control valve but i cant locate it on the throttle body. Do all vehicles have an Idle air control valve? I have a 2002 Mitsubishi Pajero io.

@gpicks7942 8 месяцев назад

Thank you sir... Added this to my list...next up after the air filter... I have the jerking back and forth randomly at red lights... have to switch to neutral or park to stop it...or accelerate...

@AutoRepairTips757 7 месяцев назад

Hope it helps

@tperry484 Месяц назад

2012 Chevy equinox having same problem hoping it’s not transmission as I bought vehicle 2 years ago with invoice of transmission belts being completely changed

@DIABLO_4_Tester_Sacramento Год назад

I overhauled my stock camaro ss L99 engine heads, valves are now in excellent condition like new, and tight enough. Replaced springs, valve steam rubbers, pushrods, rockers , spark plugs , cleaned valve lifters and injectors (no collapsed lifters on 100K mileage). Replaced all timing components and VVT along with camshaft sensor and magnet. Service Stabilitrak msg is still comes on during cranking along with a rough idle and a clicking noise. Valve lifters were found good but several of them had a scratches on the rollers. Oil pump is new, 50 psi on cruising and 26-29 psi on hot idle. Any suggestions ?? No fault codes

@AutoRepairTips757 Год назад

are the valves adjusted correctly ?

@switchfoot8702 6 месяцев назад

This looks like exactly what I need to do, I have no code on my wife’s Chevy Sonic 2018 1.8 and has a rough idle. Thanks for sharing, gave a Sub and a Like!

@AutoRepairTips757 6 месяцев назад

thanks

@justinsoderberg5660 10 месяцев назад

Wow this might be my issue! I’m trying this tomorrow 🙏

@AutoRepairTips757 10 месяцев назад

i hope it fixes your problem

@katanatac 2 месяца назад

Sometimes its the simplest things that drives us batty! Thanks for the video.

@AutoRepairTips757 2 месяца назад

You're welcome!

@fastek1kazz49 Год назад

Nicely done by a PRO. TY

@AutoRepairTips757 Год назад

Glad you enjoyed it!

@edwardransom5996 5 месяцев назад

Have a 2013 cadillac Ats, the car has serious vibrations at idle in reverse but is okay in drive .

@reavisronsmooth 2 месяца назад

I just wanted to say thank you I've got a 2004 Chevy Tahoe that battery died over the weekend so I replaced it still was acting rough so replaced alternator still stalling only while driving so I did what you said replaced the air filter and cleaned my electronic throttle body with old toothbrush and clean rag cleaned it twice it's better than before😊😊😊😊😊 ty so much it idles at 500-600rpm smooth we with air on or off sincerely ty MrReavis

@AutoRepairTips757 2 месяца назад

I’m glad it helped

@RevelationWatchman777 5 месяцев назад

Thanks for this video brother. You sure helped me out. God bless you.

@AutoRepairTips757 5 месяцев назад

Glad I could help

@garyr7027 Год назад

Some throttle bodies have a coating that mechanical tools can scratch up. Do NOT clean you throttle body like this. I would never recommend using anything abrasive on a throttle body. The coating is there to prevent aluminum corrosion that can hang up the throttle plates. Use only throttle body aproved cleaners. And if you're worried about the internal engine parts, removed the throttle body then clean it. Plus, not all throttle bodies are the same, some have air bypass solenoids for idle, which often also gets plugged up with carbon and require cleaning.

@brianboyd333 2 дня назад

Great. I just decided to clean my throttle body for the first time the other day. Well, I didn’t watch this video. The first thing I did was spray a bunch of cleaner directly in the throttle body. 😣 so far everything still seems okay. Still have a rough idle though.

@PetePuebla 4 месяца назад

I saw another RU-vidr say to open the butterfly slowly. I don't know if it makes a difference whether you open it hard and fast or slow and smooth.

@MediaTruth_ 5 месяцев назад

This was right to the POINT and with great over view of what TO DO, and NOT TO DO.👍

@AutoRepairTips757 5 месяцев назад

Glad it was helpful!

@thegooddoctor8479 7 месяцев назад

Thanks, I'll give it a try in the morning.

@adamc4155 6 месяцев назад

Cleaned throttle body and idle air control valve, still idling rough.. currently looking at replacing o2 sensor and mass airflow sensor.. Curious tho that if a car has an IAC valve, does the throttle body still need a gap to allow air thru?

@robertc.1047 2 года назад

Great video. Will this fix apply to a 2013 Nissan Xterra?

@Cfass1 2 года назад

Yes

@chakierahward5320 2 года назад

This is the same exact car i have with the same exact problems! thank you will return to see if it works.

@cm5_tech 2 года назад

how’s it running now ?

@ulyssesestrada889 Год назад

Never returned. Lol

@FireEater 2 года назад

Have a 2002 Chevy trailblazer was running like a champ but started to have a rough idle installing a stop sign clean throttle body and replace air filter no change watch the video that said to check your purge valve and sure enough that was the problem the video said if the purge valve is stuck open it creates a vacuum leak funny thing is I never got a code great video thanks for sharing .👍🏻

@AutoRepairTips757 2 года назад

Thanks

@aswinshanmugam 6 дней назад

You saved my $$$ 🙏🏻 Thanks!

@AutoRepairTips757 4 дня назад

Glad I could help!

@RyanAllman-qo6fd 10 месяцев назад

It worked! Thanks to this video!!!

@brittanylee4591 Год назад

This is the video for me...though i may have to ask my Dad or a friend for help

@AutoRepairTips757 Год назад

Hope it works

@1WildOutdoorsMan Год назад

Wish you did a before and after so we can see if it’s the problem we are having. But, I will check mine just in case

@Ninvus2 9 дней назад

My 2024 Mazda CX-50 turbo has been having rough idle but it's very intermittent, maybe once every 500-1000 miles. It's also a new car so carbon buildup is unlikely. I think the first time I had the issue the odometer was only at around 1500 miles. I took it to the dealership recently but they weren't able to replicate the issue so they just gave the car back.

@johnjohn6332 25 дней назад

Does it work also on w204 mercedes 2010 model..my car also an rough idle when you stop

@apollo11capcom39 Год назад

Thanks for the video, I've been dealing with this problem... cleaning around the butterfly is something I have not tried yet.

@-Achilles. 2 года назад

Thanks man I appreciate the help!

@CaliforniaStreets 2 года назад

Thanks for the helpful intel

@Mcfreddo 2 года назад

Thanks. I've got a low rev problem at idle and restarting from a warmed up engine, it stalls. On the 2nd start, it stays running, but in the mentioned rev situation. Cheers.

@fernandoramirez4215 2 года назад

Did you find out what was the problem? I have the same problem

@rockymountainfever204 2 года назад

@@fernandoramirez4215 Same. Any help is much appreciated!

@valkyrie9958 2 года назад

Same problem buddy, what did u do?

@Mcfreddo 2 года назад

Haven't sorted it. Clean the mass air, any vacuum leaks- I haven't looked properly yet. There is this large rubber chamber, like a dampener/ equaliser, that has several air intake pipes to it and an out, that is perishing. It only took a few years from a new car to start doing this. I then went to get a dealer part and "don't have one". Order it then:- they just ignored me really. Nothing happened. No call back. I haven't been back. Off Scotty Kilmer- To reset the computer if you need to, only use a 1 ohm, 10W resister between battery leads. ONLY when you have already disconnected those vehicle's 12v battery terminal leads prior ONLY!!! (Never short out between these disconnected battery without the resister- otherwise you'll screw your computer, -just adding.

@5050m3 10 месяцев назад

My exact car and year and symptoms. Can't wait to check this. Thank you! Should the IAC be removed and thoroughly cleaned?

@ericg4915 Год назад

A good product is seafoam spray. Not the stuff that goes in the tank, they have a spray can that is an intake cleaner and upper engine cleaner. You take the clamp off right before the throttle body, put in the straw and then tighten everything back up and spray the whole can until it's empty while car runs at 2000 rpms. It does a great job at cleaning the throttle body and the engine, I do it every year as a preventive measure so my throttle body never gets to the point that it has to be cleaned by hand. It's just an all around good way to keep the motor clean

@florenbaron7111 9 месяцев назад

Can that harm the catalytic converter?

@nilsonc93 Год назад

Did you clean it while the car running or was it off? My avalanche is having idle issues.

@AutoRepairTips757 Год назад

I clean them with the key off and I squirted the cleaner on the brush or the rag. I do not squirt inside the intake.

@nilsonc93 Год назад

@@AutoRepairTips757 thank you for the tip..

@jeanpierreremond2565 7 месяцев назад

I just replaced the oil and filter on my 2014 buick enclave, also I removed the throttlebody completely without disconnecting the battery or any other connector to clean up the entire unit plus I clean up the PCV valve. Car starts up without any problem. The next day, the check engine light came on and I got a code P0174 (4/6) fuel trim system lean bank 2. The RPM are moving up and down and the engine starts coughing on idle. I was looking for any advice to resolve this issue.

@AutoRepairTips757 7 месяцев назад

check for a vacuum leak

@tmph1814 Год назад

Great pointer I'll try that on my 99 Lexus RX300👍🏻

@just_me_lashaunmarie2689 Год назад

I have a ‘13 equinox, replaced a multitude of things (over 4K of work) my car has a rough idle when I start it up and sometimes stalls and now when I stop at lights, it’s at about 500rpms. Still not sure what it is. I’m at a loss and can’t keep putting money in this thing.

@chicagovasko 10 месяцев назад

Thank you brother that was a great video.

@AutoRepairTips757 9 месяцев назад

Glad you enjoyed it

@vg4472 2 года назад

If the problems persist beyond this point try tightening the throttle cable to keep it from dropping below 1000rpm but with the AC on it will raise rpm initially then drop it as the ac motor runs.

@kaushikkumbhani2391 Год назад

When I put rpm high then it works normal but when it drops its sharted shaking.

@fakeaccount8342 Год назад

Check your IAC

@SethGreen-d7x Год назад

Bad advise don't do it folks

@hondabrew5922 Год назад

Thanks I just did this saved myself had to comment thank you sir

@AutoRepairTips757 Год назад

glad it helped

@alonzo3564 2 месяца назад

Would of been nice to see the issues with engine shaking and roughle idle on this video. Going to try it and see how it goes

@DarthRaider501 Год назад

My 07 Sierra stumbles like its going to do or shakes at idle brand new throttlebody from the dealers, any other suggestions LS 4.8l thanks

@AutoRepairTips757 Год назад

Those trucks have issues with their plugs and plug wires if you look online you will find the replacement part number that should be in your truck. If you haven’t alreadychanged them start there

@ABCDEFGHcreator 2 года назад

I did that to my sisters camry,( it's easy and doesn't cost anything). and fixed the problem.

@bdmenne 9 месяцев назад

You have a regular can of throttle body cleaner sitting around the garage..

@kaosaechao2659 Месяц назад

Thank You For Sharing us Your Tips i have the same problem i had 2019 Ram 1500 Classic When i driving it Running Smooth but When i Press the Brake to Stop and Slow Moving Then The Engine Feels Vibration it Like Losing Power Please Let me Know How To Fix It Thanks again I’m From Vancouver British Columbia Canada 🇨🇦🙏😊👍👍👌

@AutoRepairTips757 Месяц назад

are there any codes

@dyarom4575 Месяц назад

The throttle body cleaning with engine on or off ???

@AutoRepairTips757 27 дней назад

Off

@MelissaGuild Год назад

Thank you & God bless you for sharing this tip!!!

@nikki_chi_ Год назад

OK, my 2015 Chevy equinox has been jerking while idle with no check engine today. Same thing happened 10 months back and the dealer told me to put a new catalytic converter. Now here we are less than a year later and it’s happening again. I’m honestly going to try this myself.

@AutoRepairTips757 Год назад

sorry to hear about your trouble hope this works

@annaperkins8863 Год назад

Did it work?

@GW-ip6jo 8 месяцев назад

Thanks this worked for me!

@creekwalker8178 2 года назад

Nice M4 cleaning kit brush 👍

@albertcabello7855 7 месяцев назад

Can a 1in upper intake manifold spacer cause rough idle and a strong exhaust smell?

@larryfogle3697 6 месяцев назад

What if that doesn’t stop it from stalling because it was pretty clean. Mine drops down when you put it in gear and stalls when it stops. It’s like you didn’t push in the clutch on a standard transmission.

@nathanhiggins1438 2 года назад

I have heard that manually opening the butterfly can Be bad for the linkages was that bad information?

@AutoRepairTips757 2 года назад

Whenever you’re doing it just make sure the keys in the off position especially if it’s electronic throttle body, I have never had any issues with messing up any linkages just make sure you’re careful and don’t force anything and I probably have cleaned out thousands of them over the years with no problems knock on wood LOL

@nathanhiggins1438 2 года назад

@@AutoRepairTips757 thanks!

@willwen6600 3 месяца назад

Isn't the air intake through the IACV during idle?

@albertcabello7855 7 месяцев назад

Can a 1in upper intake manifold spacer cause rough idle and a strong exhaust smell?(3025.0L HO

@mark.r8900 Год назад

Hi, my 2007 audi a4 b7 has very weak rev at idle. I stepped on the gas and the rpm just slowly goes up. Before it revs up nice and strong. Any help would be greatly appreciated. Thanks.

@katelyngautreaux6738 2 месяца назад

Some vehicles require a relearning process at dealerships , that wasnt mentioned & also you supposed to take it off to clean it believe

@catalinamartinez1858 2 года назад

I did this.. but I sprayed some directly on/in it because I was told it’s ok to do so.. I didn’t know.. If anything I feel it’s running it’s rpm higher than before?

@amystultz1608 2 года назад

Thank you. Big mucho Grande. I'll try this before I buy plugs and could. But I did hear change your spark plugs every 40 k Nissan cube so. I we I'll see w hat happens

@sl5981 6 месяцев назад

Should i be worried about any of the debris from cleaning the throttle body falling in there?

@fordrolet3983 2 года назад

Yeah... I tried this, I even removed the TB and got a new gasket. And of course I folded the bottom right corner on the gasket putting it back together. But I didn't notice that until after I noticed an even higher idle. So I took it back apart and tried to straighten out the gasket but it's still leaking somewhere.. so I'm gonna use paper board as a gasket untill this weekend..hope someone reads this all and laughs..

@solace4114 Год назад

How u fix it

@jorgesalazar9254 11 месяцев назад

Do you have a video for 2014 ford explorer xlt 3.5l v6 mines shakes when idle and it vibrate when im driving

@AutoRepairTips757 11 месяцев назад

is there a check engine light

@jerrymccurry9372 7 месяцев назад

@@AutoRepairTips757 what does the check engine light mean...mine runs, shakes, squeals, taps...etc

@laurencoll7015 Год назад

2015 Kia soup base model any idea what else it could be I had new spark plugs new coils cleaned fuel system & throttle body using premium gas past 6 months still rough idle

@AutoRepairTips757 Год назад

Is only at idle

@laurencoll7015 Год назад

@@AutoRepairTips757 yes only when idle . I had a diagnostic done at Kia dealership and they couldn’t figure it out either . Idk if it just because they were so busy because of all the thefts and stuff but they said there’s no engine light so they don’t know . I’m not sure what the next step would be to try . I’m starting to think maybe yhr engine mount because I heard that that won’t give a check engine light /code . But I know anything about cars ! Any ideas are appreciated. I also noticed that it does kinda sound like I’m driving thru a wind tunnel even when it’s not that windy out . I also just had the catalytic converter replaced at the dealer ship also . I’m just not sure what to do at this point . The dealership literally told me just wait till it breaks. 🤷🏻‍♀️

@dianesamp9102 23 дня назад

@laurencolDEALERSl7015 DEALERSHIP TREATED ME BADLY ALSO, I WENT IN FOR A 2011 FORD ESCAPE RECALL & HE SAID I WAS PASSED THE FIX IT DATE. BS IT WAS ONLY DATED IN JUNE/JULY OF 2024. BEING A FEMALE HE LIKELY THOUGHT I WOULD JUST BELIEVE THERE WAS NOTHING TO BE DONE ON THE STEERING ISSUE. THAT'S WHEN US FEMALES CALL FORD DIRECTLY & THE BBB.

@richmejia6334 Год назад

2015 Infiniti qx60 3.5, and i just did the coils not cheap, the spark plugs a few months back, and a new air cleaner duct body or whatever its called still rough idle, ill clean it again and pay more attention hope that fixes it. I have not been happy, cleaned it on a 07 bmw x5 and no issues,

@AutoRepairTips757 Год назад

check for vacuum leak

@richmejia6334 Год назад

@AutoRepairTips757 I was looking at that a while ago. But I switched back to the Fram air filter not sure if the K&N filter may have disrupted something hopefully that's it.

@jeroendenny6430 4 месяца назад

I don't need to remove the battery? They mention not pushing the valve open manually if it's electronically operated, which could damage it. Instead, turn the ignition to power on (don't start the engine), then brace the accelerator pedal hard down inside the car to open the valve. How I know mine is electronically operated or not?

@floridadog7773 2 года назад

Thanks great information ℹ️

@Aintright890 10 месяцев назад

Thank you

@AutoRepairTips757 10 месяцев назад

No worries

@7urkm3n Год назад

Is that clear thing is called EGR ? Mercedes at Stop (idling) shakes, no error codes at all.

@OK-st9st Год назад

Did the trick! I used seafoam on a dish rag and now it runs smooth.

@AutoRepairTips757 Год назад

glad it worked

@MrDaneis 2 года назад

Clean the mass air flow sensor while you're in there as well. If the throttle body is filthy I guarantee the MAF isn't looking good.

@Andrei-cp5jr Год назад

Mine has a rough idle after I give it a bit of gas and then it goes back to 900 rpm after oscillating between 1250 and 500 a couple of times. The engine shakes a bit, too and I think I even heard a misfire after revving it to 3000 rpm. It had a blown vacuum hose which I changed. The rough idle was even more pronounced before that. I don't know if it's ignition, fuel system or the throttle body. I'll check the throttle body first. The spark plugs, distributor cap and spark cables are new (were also broken). I'm worried it might have something to do with the ignition, because the car has other electrical problems involving the lights.

@AutoRepairTips757 Год назад

Check for a vacuum leak or maybe an intake hose with a crack somewhere also check at the mass airflow sensor for any leaks

@DominiAeternum Год назад

What about for an engine with a Quadrajet that exhibits these symptoms? I've tried cleaning the hell out of it with carb cleaner while on the engine still. Thinking fuel filter too, but it runs perfectly fine at higher rpms and speed. Only at idle and especially low gears and when turning does it struggle and die

@ephraimcamacho9600 2 года назад

Great video. Thanks for the info!!

@CJTdavidson11 Год назад

I'm having the same issue with my 2014 Mitsubishi outlander. The car takes a min the start going plus at stop lights or sign, my rpm will drop to 500 or lower and bounce back up to around 900 and slow goes down. So might have to try this.

@dritz3288 23 дня назад

I have the same vehicle, did this work?

@sufyanumar4663 Год назад

Would this work on an audi a4 2.0tdi you 2009 model

@JCA11 2 года назад

could this also cause the engine not to warm up all the way? my thermostat and water pump been replaced but does not warm up all the way while driving. at idle itll warm up (too slowly even when its 100 degrees out) but as soon as i drive it cools 10-50 degrees almost quickly depending on the weather, heater works like a charm (2010 3.5 v6 Charger)

@AutoRepairTips757 2 года назад

If your heater works great you might want to check your heater gauge and make sure it’s reading correctly

@TylerHankss 2 года назад

“You can’t spray throttle body cleaner in a throttle body, but you can put a screwdriver and a brush in there” 🤣

@shogunofgrowing4839 2 года назад

Yeah because the fluid will get into the Electronics of the throttle body and and rhythm and a throttle bodies run up to 200 to 500 bucks depending on your vehicle