Dude....Thank you so much. You can't imaging what I've been through to set a vpn connection lately... The most complete guide. The only addition that I could say is that you could inform people here, that they need to port forward the port 1194(that you did set before for the server) from the ISP Router.
Thanks! It took around 2 hours in total to get it working.. Somehow I mixed NAT and Filter Rules (causing timeout). Also mixed some things between certifcates 🥳 Also, I added redirect-gateway def1 after the route 10.10.10.0 255.255.255.0 so all traffic will go through the OpenVPN.
My LAN subnet is configured as 10.10.10.0/24 and has been Route for remote access. To connect remotely, it is necessary to input your LAN IP subnet address into the OVPN configuration file.
Thanks, really fast and easy. 5:30 - Not sure if this need it, coz with this rule my seervers that from back the router seen Mikrotik IP instead clients ip.
08:50 - Export .ovpn config file - this button is not showing up in my winbox, my routeros version is 7.6, where can I find it to export the config file?
Thank you very much brother, I learned a lot. It works. I just also added a rule on Firewall to accept connection from virtual pool. That way I can remotely manage my mikrotik. Also, in config file, last step, step10, when you type the IP address, you are typing local address of that Mikrotik router, correct?
Hi, Thanks for the video, I configure all the guideline as you suggested in video, Openvpn is connected but when i am going to do whatismyserver the IP address is not showing the VPN server IP, that means OPENVPN is going to connect but not reverting on the server, Can you gudie? what could be the issue?
@@Wirenetwork yes!! Internet is working , in openvpn showing connected, Getting IP address as well, showing Mikrotik server IP also, But reverting IP on vpn server
@@Wirenetwork Sorry if I didn't express myself correctly. I installed the client on Android and wanted to set a default route in the VPN tunnel. Instead of ''route 10.10.10.0 255.255.255.0'' I wrote ''redirect-gateway def1''. Thanks for the instructions!
@@Wirenetwork Great dear, The ovpn can connected in the local but difference vlan but tried to other internet or 4G doesn't connect. How to define the problem? Please help dear!
Thanks for your tutorial, it works perfectly. Can you explain to me how I can access other subnet segments through the VPN configuration? since the configuration connects without problems but I cannot access the sub networks of my mikrotik, Thanks!
Hello, Thank you so much for this detailed tutorial. However, when I try to connect on OpenVPN connect on my laptop, here is what I get as an error: crypto_alg: AES-GSM-256: not found
My Mikrotik router is connected to my primary router, and my Mikrotik is the secondary router connected via LAN. OpenVPN won't connect. Is there anything I need to do to establish the VPN connection after completing the steps in this video?
To begin with, set a static IP in the first router for the second router so that the assigned IP does not change every time you restart it or run out of power. Then forward the port you use for the OVPN connection from the first router to the second router. Normally the port that uses it mikrotik is 1194 but can be changed.
@@razvanalexandru5128 I'll try that since I have that same issue. I also tried removing the primary router and just simply having my router connected directly to the cable modem. Unfortunetly I still wasn't able to connect from an outside network with that configuration as well.
Unsupported option (ignored): user,group,persist-tun,persist-key,connect-retry Unused options, probably specified multiple times in the configuration file: client "can you help "
When I connect through OVPN then I upload file and then enter username and password the show enter 'Private Key Password' Which private key should I enter there? 😕😔