From where did you get the hose, gauge and fittings to fill the air tube with air? My pistol came only with a nipple. What dimensions do I need for the rest of the equipment?
Benim tabancada ki hava tüpünü sökünce regülatör de böyle tornavida ile sıkılabilecek bir vida yok. regülatörün üstünde 4 tane delik var bunun ayarını nasıl yapabilirim
Is it possible to fill it without using the connect adaptor shown at ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pGlgB-NE25w.htmlsi=smdOp0GiZXdqXtlo&t=77 ? In my club they won't allow, for safety reasons, to handle the tube by hand while filling it, especially as the guy holds the connector too (to avoid it from going out ?). If so, what item/adaptor should I use to plug the air tube on a diving tank ? what are the required specs (in/out diameters and threads, etc) ?
I had a similar problem. It may help marginally to get a better grip if you take the barrel housing off. Also with it off you may be able to use something like an oil filter wrench to remove it and then a little grease on the threads when putting it back. Had the same problem with the suppressor adaptor. Bought pistol and suppressor at the same time. The store tried several to make sure suppressor was not blocking sights. When handing back to me adaptor was still in pistol, they said you may want to leave it that way, meaning they couldn't get it off. Seemed unaware that there are two flat spots on the adaptor which fit a 14 mm spanner! Have fitted adaptor to suppressor using loctite and a spot of grease on threads when fitting it to pistol.
@@HowardWalker1948 I’ve since realized it was torqued so tight because that’s the only way from factory it would hold air! Love the gun but, my purchase of a second air tube with O-Ring the original didn’t come with made it a non issue. The had it so tight at the factory so it would hold air because some didn’t realize a one penny 0-Ring was missing
