RTL-SDR/dump1090 build and install - Raspberry Pi 

Great step by step tutorial. THANKS!

Hi! I have such a question, is it possible to upload a map without the Internet?

So I received another comment via email, but I can't see it here. "I have been working on this project for several days. I cannot get past the blacklist error. I have created the file in nano multiple times but you go so quick and I don’t think what you have have written in the blog corresponds to the command you execute to save the file based on your video. I get the same error every time I do rtl_test. I am about ready to sell it all on eBay." Several possibilities: 1. You may not need to blacklist your SDR. I recently added another setup and didn't have to blacklist anything. 2. The blacklist device name has changed (chipset version?) 3. I made a typo. What is the exact error returned from rtl_test?

Hello, I encountered a problem, which is the same as the comment below. "make:***[Makefile:24:dump1090]Error 1" has been changed for several days, and it doesn't work. Come and ask for help. Thank you.

using a different usb port fixed the rtl_test error for me

When my terminal detect the planes, it won't show on the map, " 0 planes on screen". Do you know why? tks !

Tried "git clone git:" but it DOES NOT WORK. Then tried "git clone https:" and it works. Just saying if someone got that problem too.

what os version is this exactly sir?

I get this error “usb_claim_interface error -6” during rtl_test

I cannot get the rtl_test to work properly even after doing the resolution.

I followed everything on a Raspberry pi 2, including recognizing the receiver. Any chance you know why I would get collect2: error: ld returned 1 exit status make: *** [Makefile:24: dump1090] Error 1 when make command in run while installing dump1090

This is odd... I received the comment in email, but I can't see it here. It's not held for review and even the video page says "1 Comment"! I guess the commenter deleted it(?). So, for the benefit of others: "Thanks for the simple tutorial that works! One question, ever since I've done this, my Chromium browser crashes when I try to go to RU-vid. xD No explanation as to why but I installed another web browser which will let me do that. Can you make a video on how to visualize the planes offline using OpenStreetMaps?" "Chromium browser crashes" : I would reinstall Chromium, it's possible (but doubtful) that a shared library was overwritten. "how to visualize the planes offline" : This one is a bit tricky, as registration numbers and flight ID are common lookups in the user interface (Virtual Radar and etc. though the host map does not). That said, you could *just* look at the output of 'dump1090 --interactive' and see hex ID, Mode, Sqwk, Flight #, Altitude, speed, heading, lat/long... If you're a visual person this most likely would be of no benefit. Interesting thought though... I'll look at how Stratix does it. Surely they're only mapping given the ADS-B data and not looking up each and every aircraft.

I followed the article and then double checked it via this video. I get to running ./dump1090 --interactive and all I get is an error -bash: ./dump1090: no such file or directory when I am in the dump1090 folder