Rubber Flexible Brake Hose Replacement on Ford F-150 2009-2014

Подписаться 40 тыс.

Просмотров 26 тыс.

50% 1

00:58 Rubber Flexible Brake Hose Replacement
08:02 Bleeding brakes
⚠️Warning:
If you’re not comfortable on working on the brake system, please seek professional mechanic because of safety issues. Otherwise, watch these videos for entertainment or education only.
If your brakes still dragging after you replaced your caliper, it could be the flexible brake line:
🎦 • Brakes Still Dragging...
Also, you should not neglect changing all your rubber brake hoses as a part of regular maintenance when working on your brake system. As it can cause major problems besides leaking.
Lug/ Wheel Stud Replacement - Fast & Straightforward - Any Vehicle
• Lug/ Wheel Stud Replac...
How To Remove A VERY Stripped Lug Nut - When All Tools Failed - Guaranteed
• How To Remove A VERY S...
Save money and learn how to bleed brakes by yourself on any car
• Save Money And Learn H...
Brake Burning Smell? - Frozen Brake Caliper Replacement on Any Car
• Brake Burning Smell? -...
Brakes Dragging? And Not a Frozen Caliper?
• Brakes Still Dragging...
💰Save money on other Ford F150 maintenance and repairs :
Ford F 150 Spare Tire, Jack, and Tools Location& Removal Drop Spare Tire on Ford F-150
• Ford F -150 Spare Tire...
Any Ford F-150 Tailgate Removal - No Tools Needed
• Any Ford F-150 Tailgat...
Ford F 150 Fuel Gauge Problem: How To Know If It Is The Cluster Or Something Else
• Ford F 150 Fuel Gauge ...
The most effective way to find a leak in Ford F-150
• Ford F-150 cab water leak
How to relearn and reset TPMS (tire pressure monitor sensor) light
• How to relearn and res...
Ford F-150 Transmission Problem? Might be an Easy Dry Shaft Fix
• Ford F-150 Transmissio...
How to find your security keyless entry keypad code on Ford F150
• How to find your secur...
How to Remove Ford F150 Fronts Seats
• How To Remove Ford F15...
How to unlatch rear seat back on 2009-20014 Ford F-150
• How to fold down rear ...
How Remove Ford F150 Inside Door Panel
• Ford F150 Interior Doo...
The Removal and Installation of Door Lock Actuator, common failure on F150
• Replacement of door lo...
How to Replace Blinker Bulb on Ford F-150 2009-2014
• How to Change Turn Sig...
Review, installation, and testing of GTR Lighting ULTRA 2 LED: H13 Headlights for 2009-2014 Ford F150
• Review, installation, ...
Review and installation of LASFIT Pro series Custom Design LED headlights for 2009-2014 Ford F150
• Review and installatio...
Ford F150 Gas Cap won’t stay closed? Permanent Fix!
• Ford F150 Gas Cap won’...
⁉️QUESTIONS
If you have any questions or I missed something, comment below and I’ll answer and try to help you out
If you find this video helpful, like it and subscribe to my new channel. I’ll have tons of videos on all kinds of car and truck repairs in the
future.
⚠️Disclaimer:
The videos on Motorcarnut channel are posted with informational purpose only.
Information posted in this video does not guarantee any particular result. Use this information provided in the video with caution and at your own risk. It is the responsibility of the viewer to take this risk.
Motorcarnut is not responsible or liable for property damage, any loss damage, or injury related to or resulted from information posted in this video.
⁉️If you have any questions or I missed something, comment below and I’ll answer and try to help you out
If you find this video helpful, like it and subscribe to my new channel. I’ll have tons of videos on all kinds of car and truck repairs in the future.
⚠️Disclaimer:
The videos on Motorcarnut channel are posted with informational purpose only.
Information posted in this video does not guarantee any particular result. Use this information provided in the video with caution and at your own risk. It is the responsibility of the viewer to take this risk.
Motorcarnut is not responsible or liable for property damage, any loss damage, or injury related to or resulted from information posted in this video.

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@kochmachines Год назад

Really well done video. Appreciate it more than any others I've seen. Replaces easily but now having hard time with loosening rusted bleeder screw. Just can't be easy!

@Motorcarnut Год назад

If you didn’t get it loose try using penetrating oil and let it sit awhile. I know sometimes you have to replace more than necessary.

@kochmachines Год назад

@Motorcarnut I finally took a torch to the caliper then cooled the screw and it came loose.

@Motorcarnut Год назад

That’ll do it.

@justmynametonyd8045 2 года назад

Great explanation. I always do my own brakes, last time I replaced a brake line was a long time ago. I will be doing again hopefully tomorrow. Your video is a great help.

@Motorcarnut 2 года назад

Thank you, glad it helped

@eyeorewolf Год назад

Getting ready to do this job, It's always nice to get a preview. Thanks for this video.

@Motorcarnut Год назад

Hey, no problem thanks for the comment!

@eyeorewolf Год назад

@@Motorcarnut mission accomplished. Both passenger and Driver's side done. Now I have to address a leaky exhaust manifold. I'm thinking of going to stainless shorty headers.

@Motorcarnut Год назад

Great! Stainless is a good choice. They last longer and look great.

@donzilla3325 Год назад

Thank you sir for being straight forward.. excellent breakdown 💯💯👌🏽💪🏿🙏🏾

@Motorcarnut Год назад

No problem! Thanks for the comment!

@notsure9967 Год назад

Thank you for the video. I have a 2010 f150 that was dragging on the front passenger side. Replaced the caliper twice and it was driving me nuts as no one had an answer other then a bad caliper. Replaced hose and bam, no issues. Good work and good video.

@Motorcarnut Год назад

Glad it helped and thanks for the comment!

@rodneybillard-4866 Год назад

Lol I'm in th3 same boat right now. Changing the flex line today

@Motorcarnut Год назад

Hopefully it fixes the problem

@jasoncampbell6636 11 месяцев назад

And me as well it's never common for the hydraulic system to be faulty i am praying 🙏

@Motorcarnut 11 месяцев назад

Good luck!

@Sprofka Год назад

Everything I needed to see u kept out of the frame of camera lol

@Motorcarnut Год назад

Like what?

@p.graham5655 2 года назад

Good video. Thanks. Did you bleed the front driver only?

@Motorcarnut 2 года назад

Yes, and that’s fine as long as your brake reservoir doesn’t go below the low mark and suck in air.

@philipkaiser1232 Год назад

Thank you!

@Motorcarnut Год назад

You’re welcome!

@Malcomb35 2 года назад

Why buy a hose with a bracket when the brackets are already there?? I'm asking because I need mine changed and there's a price difference, so I was wondering if it was a must do thing .

@Motorcarnut 2 года назад

I hear what you’re saying but the bracket on the one I changed came with it and it’s pressed on the hose. See if you can take your old hose off the bracket then just install the new one.

@Malcomb35 2 года назад

@@Motorcarnut oh ok I see what you're saying ...thanks for the reply back.

@Donnie_Prestwood Год назад

There is a hole in the bolt that screws into the caliper holding the rubber brake line on. Doesn't that hole have to line up to the hole in the hose to let fluid flow properly into the caliper?

@Motorcarnut Год назад

No, the inside of the hose where the bolt goes through has a 360 degree channel so it doesn't matter.

@Donnie_Prestwood Год назад

Great, Thank You!

@Motorcarnut Год назад

No problem

@whitechris720 2 года назад

I was watching to see how much fluid was lost when disconnecting the top of that line. Everyone cuts that part out?

@Motorcarnut 2 года назад

Your best bet is to install the bottom hose on the caliper first then get ready to install the top fast as it does dip out pretty fast but you have plenty of time if you do it this way.

@whitechris720 2 года назад

@@Motorcarnut I got it replaced. Thanks for the help!

@samuelyeet6006 2 года назад

@@Motorcarnut I'm in the middle of this job and that is literally the only part I had trouble with lol the nut on the hard line didn't spin, so I had to spin the entire caliper to get the hose to tighten on, i should have had the new hose off the caliper, and now I'm trying to figure out how to get the bracket to line up without snapping the hardline, why not show this entire part? It's like mechanic egos get in the way and they refuse to show the only difficult part because they may have struggled a small bit. I almost snapped my hard line lol its like everytime I youtube something for my truck I have this exact same problem.

@Motorcarnut 2 года назад

You sound frustrated, if I left something out it wasn’t intentional, I can’t record every moment and sounds like your hose was maybe rusted or you are using the wrong tools? Plus I don’t know what you are replacing on which model vehicle. Just a hose like in the video for an F150?

@samuelyeet6006 Год назад

@@Motorcarnut @Motorcarnut yea I was frustrated, it's just my luck, almost all the jobs I've done, I have trouble on the exact spot that people skip in the video. You recorded everything, but skipped the only part I needed lol but I get it. Yea it was the same brake like you were working on, 2011 f150 The hose connection from the caliper to the hard brake line, the connector on my hard brake line was frozen in place, you didn't mention any special tools for this part, so I had no way to get it on without twisting the entire hose on to the frozen hardline, and of course since the instructions were to put the hose on to the caliper first, I'm over here with brake fluid going everywhere and I'm trying to get the threads started between the brake hose and brake line by spinning an entire caliper in one hand and holding the connectors in the other lmao. It was a shit show. It's just bad luck on my end, I prep and prep, but it's not good enough haha