No video :(

Ruger Precision Rifle Rimfire "Build" and Range Day!

Подписаться 7 тыс.

Просмотров 72 тыс.

50% 1

My previous RPR rimfire video was on all the build parts minus the RPR. Now that the RPR is home, it's time to accessorize!
I walk through the grip swap, stud mount, bipod install, muzzle brake install (a shim/peel was needed) rings install and finally the scope mount.
Then it was ready for the range. Took it out this past weekend, signet at 25 yards to see how "close" the scope was to work with in terms of getting on paper, then did the same @ 50 yards and finally 100 yards. Honestly, I had the most fun @ 50 yards, so I settled in on that for zero.
The shot groups were great and that was using Remington Golden Bullets, which I would label average 22lr...certainly not making any top 5 or even top 10 lists like others (which are more expensive) such as:
CCI Standard Velocity
CCI Subsonic HP
Norma T-22
Aguila Super Colibri
Lapua Center-X
SK Ammo
Wolf Match Target
Norma TAC-22
But, since I enjoy plinking, I'm not too picky and was more than happy with my groups.

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 78

@wille3303 3 года назад

Use Mlok in the following way. Tighten the backings all the way. Insert accessory into desired slot. Loosen Mlok until it begins to turn the backing. Reverse and tighten

@jarink1 2 года назад

Have to be careful on the RPR that the bolt shafts for any MLOK accessories aren't so long that they touch the barrel. If they do, it's no longer free floated and accuracy may suffer.

@Healthliving1967 Год назад

I just put in a permit to aquire one of these here in Queensland Australia with the 15 round curved magazine. Great rimfire rifles.

@andyedmond248 Год назад

G'day mate. I have just purchased this rifle and I will also be installing a bipod, and fitting 4-16x44 FFP Diamondback Tactical Vortex scope. Really enjoy your natural style when presenting these videos. Subscibed. Now it's time to view more of your content. Thanks for doing these mate, appreciate it. Cheers from Australia.

@ReLoadersBench Год назад

Thanks. Hope you enjoy my other content as I tend to cover just about anything that catches my fancy at any point in time...but always bring it back to the core of 2A related content. Good luck with your purchase and build. Awesome fun and the boolits aren't too expensive to enjoy range time.

@sturny3698 2 года назад

Just picked up a used one of these rifles. Sighted it in at 25Yrds to start (indoor range) but I plan to take it out longer as the weather improves. It had a 1-6x24 Vortex on it when purchased, but I replaced it with a Tango 4, 4-16x44 Sig Sauer. Now, 25 yards is not so clear, lol. Thanks for the video and information. I'm planning to do some of these upgrades as I get more into it. 👍

@ReLoadersBench 2 года назад

Definitely a fun rifle.

@Reaper_1776_ 3 года назад

Cool build! I've been looking into the same gun and now I've decided I'm gonna go for it. I love your videos and can't wait for more!

@christophersallee7904 Год назад

I have the .17hmr model and first thing i did was replace the pistol grip lol that thing sucks. Then i installed an ambi safety selector. Next is the mag rekease... going to an extended one. Quick and easy mlok install... prior to installing the attachments line up the tabs with slots on the rail/handguard and tighten them down so they don't rotate. Mount them on the rail/handguard then loosen them in place until the tab has backed out far enough to allow it to rotate when you try to tighten it. Tighten and torque to spec and your done my friend 👍

@ReLoadersBench Год назад

Good stuff, thanks! Lovin' this platform.

@christophersallee7904 Год назад

@@ReLoadersBench right on... no prob. Yeah the rpr is pretty awesome. I had a savage (pre accu-trigger) 93r17 stainless bull barrel but i got tired of the unreliable 7rd or 10rd capacity mags. So it got retired even though i believe it was the more accurate of the two rifles... but not by much.

@jeremyboyer6861 2 года назад

M loks are awesome! Love them once you get the hang super easy.

@barryd.thomassr.9156 2 года назад

Shot mine today, Wolf match target 5 shot group 3/16 " at 50 yds. Eley Club shot 11/32" 5 shots

@D148521 Год назад

Thanks for the great vid. I just ordered one of these today. Think it will be a great shooter.

@RedNeck_Rimfire Год назад

Nice gun build. Thx for the video

@joostprins3381 Год назад

Did you hone the bolt of sharp edges? And checked the trigger for edges etc? By putting some shims at the trigger you can take out the sideway movement and make it going smooth by honing it a bit. Just a bit of tuning with the available parts. Also the trigger pressure is adjustable, don’t take the spring out if you like light pull, but put another in but make sure it resets full after you pull but decide to adjourn.

@w8knb8kchop88 2 года назад

Enjoyed the content. Thanks for the insight. Subscribed.

@mlone7 6 месяцев назад

I personally think that you are setting yourself up for failure because of under torque and no locktite but that is me. That being said its only a 22 so who knows. Mine comes in tomorrow so I will find out.

@patrickcoleman5867 8 месяцев назад

I loved your video can you please send a parts list for the Mlock and bipod and whatever else you can thank you

@ngirardo86 3 года назад

You pull the 2 receiver bolts and pull the upper off and the 2 screws holding the handguard on are then visible..simple takes 15 seconds. And you hate mlok because you don't know how to use them. They are beyond easy to install as long as you don't have the hardware too loose when installing.

@gvv1mhh Год назад

I’m sure you put a lot of work into making this video. It would be helpful to mention the sizes and specs on the equipment your mounting. For instance, what kind of scope is that? What size rings are you using? Do they have a negative MOA built into them? Does your Picatiny rail have a negative MOA built into them? It’s disappointing to watch a 45 minute video just to see a dude “slap” on a scope without providing any detail.

@ReLoadersBench Год назад

I'm guessing you skipped around the video because ALL of your "for instance" questions are shown during the video had you watched all 45 minutes of my 40:43 minute video. For example, @ 21:06 there is a CLEAR shot of the scope ring package with ALL the specs you ask about. The brand of the scope is visible as well (in addition to numerous other videos I did on this stuff prior to the build, but you probably don't want to take any extra time to check, easier to just ask redundant questions I suppose). I'm not here to provide you or anyone else an endless list of specs you feel are relevant, so if you want to know the MOA of the picatinny rail on the Ruger, head on over to Ruger's site and do some research. Take some accountability for your own learning instead of expecting/critiquing someone else for not providing it.

@texpatriot8462 3 года назад

Is the zoom adjustment tight on your scope? I bought my first Crimson Trace scope and turning it takes oomph

@ReLoadersBench 3 года назад

I thought the zoom was a bit “stiff” to turn until I tried to test the illunination adjustment levels...OMFG...I think I lost a layer or two of skin on my thumb and forefinger. Nice picture however.

@joostprins3381 Год назад

What bipod is that? I got the Magpul and am very happy with it, weight etc, but can’t have other then the 90 degrees, this looks a nice bipod for my next rifle. Btw, I got the RAR LRT with a Konus 8x32-56 and the Magpul bipod.

@ReLoadersBench Год назад

Available on the rainforest if you search on "UUQ Heavy Duty Bipod - 8” to 12” Inch Tactical Rifle Adjustable Bipod，with Sling Stub Adapter Base, Additional Picatinny Rail Adapter"

@joostprins3381 Год назад

@@ReLoadersBench thanks, love you’re rainforest hint….

@jerrycandelaria8845 Год назад

Like the build should have saved that muzzle brake for an AR I own two of the rpr rim fires one of them hates the muzzle brake and the other one likes a muzzle brake but again because there's really nothing to it they're mostly aesthetic they have no real purpose on a 22 but still a great build I've done lots of things to mine too many trigger different hand grip bipod bolt knob

@rudolphferdinand3634 2 года назад

Here is a better pistol grip you one day want to try ATI X2 AR-15 GRIP; this style of grip angles the trigger differently.

@MoeMoney9 3 года назад

I bought the 17 hmr version, do you think it was a good idea?

@ReLoadersBench 3 года назад

I guess it depends on your needs. 17 HMR is faster and flatter shooting than 22lr, probably better for varmints as well. I chose 22lr because I have the ammo and I have a thing for that round.

@MoeMoney9 3 года назад

@@ReLoadersBench oh ok thanks!

@laa0fa502 2 года назад

If you enjoy it it was a good idea

@larrys639 Год назад

Only way to go.....still kickin 1400 fps at 200 yrds.

@stevethepirate8907 3 года назад

Anarchy Outdoors whale tail mag release, thank me later.

@ReLoadersBench 3 года назад

The standard mag release isn't the most wonderful aspect of the rifle and I've considered replacing the mag release with an extended version. Thanks for the recommendation.

@Lunas_5.Slowww Год назад

What bipod did you use

@DubfromGA 2 года назад

LMAO at "another age-restricted video". :)

@DubfromGA 2 года назад

Meant to add......I"m the same way, man. No project is complete without some good cussin

@christophersallee7904 Год назад

I bout died 🤣🤣🤣

@alitrash3978 8 месяцев назад

70+ for sure.

@joegates96 2 года назад

What scope did you use? What brand and height of rings??

@ReLoadersBench 2 года назад

Scope and ring info were in the prior video covering all the parts going into the build

@wellsgb1957 Год назад

Nice👍🏻👍🏻

@ReLoadersBench Год назад

Thanks.

@littlehills739 2 года назад

Q and A dose the two 10 shot clip that clips two mags together fit in the mag well?

@ReLoadersBench 2 года назад

Don't have to try, so I could not tell you definitively.

@littlehills739 2 года назад

@@ReLoadersBench do u have 2 mags u could place 1 in then turn 2nd over to face out and see if i can epoxy them together? please and thank you dont know if i want to buy it yet. only held one in shop

@fitbody360 6 месяцев назад

How’s it shooting 2 years later?

@ReLoadersBench 6 месяцев назад

Brought it to the range during Christmas break...rockin like a champ. 22lr is so satisfyingly underrated (even the dirty/crappy stuff)! Love consistently hitting what I'm aiming at in very small groups.

@TeamFITBODY 6 месяцев назад

@@ReLoadersBench Right!?! I mean even though I have the means to shoot bigger, more expensive calibers, this takes the cake. I love hitting steel at distance with it. Still playing around with which ring height I want on my Vortex 6-24...don't want to miss out on scope caps, but don't want to move too high up just for that option. That's my current conundrum I'm working through. Have had it high and low and just can't make up my mind.

@ReLoadersBench 6 месяцев назад

@@TeamFITBODY - I like to run my glass as close to the frame/barrel as possible. Not all my glass has caps, but that's part of the formula/challenge ;-)

@jamesglenn520 2 года назад

Curious 🤔 What model/specs on the scope? I don't really understand the gripy grip other than looks. When I shoot mine I don't wrap my thumb because of human impute when you squeeze the grip 👍

@ReLoadersBench 2 года назад

I did a video on the scope --> ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fsF4Qgt14LA.html I'm not a fan of the smooth-ish hard plastic "standard" AR type grips (which is what was on the RPR) and found the AG-43 years ago, so it's my "go to" fav AR grip. Once you've felt it in your hand, you'd understand.

@braylinmangrum724 2 года назад

Where did u get the grips from

@ReLoadersBench 2 года назад

If you search on "agr-43", you'll find them at a number of vendors. I think I paid $29+shipping.

@braylinmangrum724 2 года назад

Thank u

@nickjm37fordel1 3 года назад

Forgot the name of the bipod your using !

@ReLoadersBench 3 года назад

That would be: "UUQ Heavy Duty Bipod - 8” to 12” Inch Tactical Rifle Adjustable Bipod，with Sling Stub Adapter Base, Additional Picatinny Rail Adapter" and the rain forest folks have it.

@nickjm37fordel1 3 года назад

@@ReLoadersBench Thank you, I know you gave it in another video, but can't find where I wrote it down !

@P.J.GABRIEL-dv2bv 10 месяцев назад

What height is your rings ?

@ReLoadersBench 10 месяцев назад

1.45"/37mm if memory serves. I know there is a shot of the rings packaging in the video.

@P.J.GABRIEL-dv2bv 10 месяцев назад

I got 17HMR ruger precision rifle on order am putting a 2.5-12x40 scope 1 inch tube, i don't know what height rings i need to clear the front of the chassis

@kluper1157 2 года назад

I keep a Bore-snake in my grip storage! and wheeler torque's break after so many usages AR wrench must be Good Chinese crap!

@0076Coyote Год назад

5:33 That's what she said!😏

@ReLoadersBench Год назад

We should all stop talking and start screwing!

@deaczorz 3 года назад

looks fun but the groups i seen out of that rifle so far has nothing to do with precision.

@ReLoadersBench 3 года назад

I guess precision is in the eye of the shooter (interesting pun!). For my definition of "precision" (with my tri-focals), shooting out a nickel sized target @ 50 yards with "average" ammo (i.e., not high end, "accurate"/expensive 22lr) is good for me and it's quite fun to shoot for sure.

@deaczorz 3 года назад

@@ReLoadersBench yea its looks like great fun i guess its quite light? im a bit sick of my heavy anschutz thats mainly a bench gun

@ReLoadersBench 3 года назад

@@deaczorz - The stock rifle is very light. Adding the bipod gave it some serious front end weight/stability. W/O the bipod, easy to carry around, no so much with this bipod.

@Checo1 3 года назад

@@ReLoadersBench mine shoots 1 "target at 100 yards with good ammo, not expensive but good enough, like CCI SV. I have gets mine up to 200 yards easily on a 12" target, pretty sure if I use match ammo I can go 300 or even 400 yards. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MDVBcrJn8d8.html

@nickjm37fordel1 3 года назад

PS: White tea ? could that b " V " tea ?

@ReLoadersBench 3 года назад

Diabetic tea of course!

@nickjm37fordel1 3 года назад

@@ReLoadersBench I do white tea with tonic water and ice :-) Cheers !

@Lunas_5.Slowww Год назад

What bipod did you use

@ReLoadersBench Год назад

UUQ heavy duty from the rain forest folks