Running My House Off Power Stations | 3 Month Update

Подписаться 35 тыс.

Просмотров 19 тыс.

50% 1

Calculate Solar Panel Cost For Your Home - www.solarrevie...
EcoFlow Delta Pro Ultra - amzn.to/3Kt5z6A
EcoFlow Smart Home Panel 2 - amzn.to/3X1Q90I
EcoFlow PowerInsights Display - us.ecoflow.com...
EG4 6000 XP With Battery (Alternative Option) - signaturesolar...
I have been running the EcoFlow Delta Pro Ultra and Smart Home Panel 2 (SHP2) at a rehab house for about 3 months now. I will walk you through my experience (both good and bad) in addition to testing out integrating older EcoFlow Delta Pro units into the SHP2. This overall system provides a great battery backup for this home and also helps to offset some of the power demands.
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@Pallidus_Rider 2 месяца назад

One thing I have never found an answer to ... Can these power units be charged at certain time of day? If yes, this would really expand the consumer base beyond solar users, so it electricity can be purchased at cheaper time from grid, and then use the Ecoflow during the expensive/peak time if day

@glensworld66 4 месяца назад

I have the same setup (only with more batteries) and I received the error several times too. But once I got on the latest firmware I have had NO issues. I'm kind of amazed at how well its working really.

@everydaysolar 4 месяца назад

Thanks for the additional feedback 👍.

@tumbleweed1976 4 месяца назад

Thank you for the video. Decreasing energy use is an option worth addressing.

@Superiorsolarconsulting 4 месяца назад

News coming out of the biggest supplier, CED, is that multiple contractors who have installed EG4 systems for clients are struggling to get many through inspection because they apparently falsified their UL listing. Can’t verify any of this at the moment but this is what I’m being told through my information sources high up in the industry.

@everydaysolar 4 месяца назад

Hey Julian, thanks for the heads up. If they didn’t actually get UL approval that would be a bit of a problem. I will dig deeper to see if I can find any additional info.

@zachgrossman26 3 месяца назад

@@everydaysolar what is UL approval? Apologies if thats a dumb question

@ahaveland 4 месяца назад

Tip about AWG and cable area - if you double them up in parallel, you jump 3 sizes: 2 x 10 AWG -> 7 AWG 4 x 10 AWG -> 4 AWG

@JamesPan79 Месяц назад

Can you do a video on how to connect an eco flow to a Tesla power wall system?

@mw5673 Месяц назад

Always good information from you sir! I have a question concerning remoting the connectors from the panels...what is the farthest distance it can be placed from the panel? My garage gets very hot here in Arizona during the summer, so placing my EcoFlow systems in it is not a good choice. I want to remote it to either my gym room (30 feet away from grid panel) or 2nd floor loft area (16 feet away from grid panel)...

@christophecoudray1875 4 месяца назад

Great video! Thanks! I have a similar set up. Quick questions: 1) Can you charge your Delta Pro with the SHP2 using the 7200 max input? 2) where can you buy the Insight Tablet? 3) Can you have 5600w Solar on the Ultra + 2 x 1600 watt on your Delta Pros for a total of 8800w solar input? Thanks!

@Kamodomon 3 месяца назад

I didn't know you could plug in two Delta Pros (with a hub) into the Smart Home Panel 2. Thought only the newer stuff could plug into it. HUH

@everydaysolar 3 месяца назад

Nope, backward compatible as long as you have the new dual voltage hub with the infinity plus plug.

@dodongregencia4611 3 месяца назад

👍👍👍 watching from Lapulapu City, The Philippines.

@oscarre5446 4 месяца назад

Thanks for the video. It answers some of the questions I had. I have 2 DP with dual voltage hub1 and a10 circuit xfer switch for emergency backup. I had been considering the setup you have. Where did you find the dual voltage hub2 and cords to connect the DP's?

@michaelhardy195 3 месяца назад

Eco flow delta pro 3 check online 😎👍

@everydaysolar 3 месяца назад

Doing a video for Everyday Home Repairs channel on the DP3 today and should have one for this channel tomorrow 👍

@elykk18 4 месяца назад

As always, another great video, appreciate it! Couple questions: 1 - Is the Ecoflow Deltra Pro Ultra UL Certified (safety question)? 2 - Was the Ecoflow Deltra Pro Ultra something you purchased or was it given to you by EcoFlow?

@everydaysolar 4 месяца назад

1. Yeah I think the UL 1741 certification in associated to the Smart Home Panel 2 and not allowing you to feed power back on the grid in a power outage. 2. Yes, everything in this video was given to me by EcoFlow at no cost.

@tlteal 3 месяца назад

It's a shame that the Delta Pro and SHP1 doesn't work with the PowerInsights Display. Appears ecoflow has basically abandoned those with the Delta pro's and are busy designing a whole bunch of other new stuff without considering the ecosystem that you can "add" to. You'll have to rip and replace..... very unfortunate

@mw5673 Месяц назад

Hey sir, Do you have a video with 1 EcoFlow Delta Pro connected to the Smart Panel (not the Smart Panel 2)? Also, if only 1 Delta Pro is connected with an extra battery can I still use all 10 circuits without any problems? My other question is can I do the same setup with the A310c (6-circuit) or A510a (10-circuit) transfer switches EcoFlow offers and still have all 10 circuits capability on the A510a? (Ecoflow can’t seem to give me a direct answer, they dance around it…)

@ernieburgos7702 Месяц назад

I am seeing users on reddit having problems with the SHP 2 reliability and service. relay failures and error messages that shut down the panel with long delays in getting service. Is there a way to setup these smart panels but still be able to use the original subpanel without any delays?

@ahaveland 4 месяца назад

These look well integrated, but do they sync with the grid and with each other? I made my own power station with a 3kW standalone inverter and 3kWh of scooter batteries in a toolbox/handcart, but I daren't wire it into my apartment system unless I could be sure that the smart meter and grid were completely isolated! Still, it's useful for outages to run a fridge, microwave, computer. and charge a car in emergencies.

@LenisPerezlenpe Месяц назад

on the current setup from the video 1dpu to shp2 and 2 dp to shp2. If you only connect 1dpu to shp2 and 1dp will it work? will the dp charge and discharge? Thanks

@joannakemp3710 4 месяца назад

I bought one and it worked one time and quit working. Customer Service no help at all.

@everydaysolar 4 месяца назад

Oh man, that is unacceptable. Thanks for the feedback. What is your next move? You should get you money back if it is a dud and can’t be fixed.

@joannakemp3710 4 месяца назад

@@everydaysolar They want a video of it not working! How stupid is that! It won't come on! So they want a video of it just sitting there. Unbelievable.

@junkerzn7312 4 месяца назад

Customer service is going to be poor for nearly all brands of power stations and hybrid inverters. Only a few companies actually offer proper warranty service. Victron, Enphase, SMA, Sol-Ark, and a few others have real warranties and real customer service. Most of the generic stuff you see on Amazon does not. RU-vid creators can get good service, but regular customers.... probably not so much. Brands like Eco-Flow, Bluetti, and so forth, should only be purchased if you are willing to throw the sucker away when it breaks... which is why I don't recommend large power stations at all myself, let alone power-station expansion eco-systems. It is really hard to justify buying a power station larger than around 1000Wh. This is one of the major down-sides to trying to use a power station to run a home. It's a proprietary, expensive, single point of failure, with essentially no warranty service. And very few such systems are going to last more than a few years. They are not made with high-end components. Discrete systems are a thousand times better. More work to DIY, but a thousand times better... even without warranty service, you have a lot more redundancy and component failures are far less expensive to replace. Just in general terms. I'm not harping on the video per-say, other than to point out that creators really need to be more cognizant of the life-span of these sorts of systems. -Matt

@tlteal 3 месяца назад

@@joannakemp3710 I've had nothing but issues with ecoflow customer service. Once you buy, they literally forget about you. I've moved to a DIY setup and will use these other ecoflow products as a cooler or ottoman LOL

@lukem5962 Месяц назад

How long can your setup with run your ac?

@tlteal 20 дней назад

Not long.

@solarcharging9743 4 месяца назад

Without a transformer to provide galvanic isolation, you're playing Russian Roulette with your home's appliances. I would never power my home's appliances with one of these high frequency, transformerless inverters.

@junkerzn7312 4 месяца назад

Galvanic isolation has nothing whatsoever to do with home wiring which is already going to be referenced to earth ground through the neutral. Unless you want to complain that utility wiring isn't isolated. Galvanic isolation is only really an issue in marine environments... in the home, only your water heater has to deal with it and of course the water heater already has a sacrificial rod for that.