Russian Nuclear Corporation molecular disruptor

Подписаться 1,1 млн

Просмотров 132 тыс.

50% 1

This thing actually does disrupt molecules. By applying a high voltage to needle tips in front of oppositely charged rings it generates small points of electrical plasma that split air molecules into separate atoms, allowing some to recombine into short lived, but very useful active molecules like ozone.
This project is designed to be used with the cheap ioniser style power supplies on eBay, and will convert them to a mini "ionic breeze" type unit that blows a gentle draught of air out the front with active components that have beneficial effects in some indoor environments.
I made a video about ozone that explains more:-
• The non-EPA guide to o...
Here are links to the PCB zipped gerber files. You'll probably have to copy and paste the links into your browser. RU-vid might block links to zip files for security reasons.
It's two separate designs because the corners are rounded and PCB makers may not like two different PCBs being submitted as a single panel.
The main needle holding panel:-
www.bigclive.co...
The front plate with different text:-
www.bigclive.co...
I've since tested this module with mains voltage ioniser modules, and the differing module sizes give different levels of ozone output. If using the mains voltage modules I recommend using two 1 Megohm resistors in series with each wire for safety. Preferably 1/2W or 1W resistors for their higher voltage rating. It works very well with the 12V module I showed, which is effectively an ozone generator already with its two opposite polarity carbon fibre emitters. When used with this panel much more ozone is generated.
If you enjoy these videos you can help support the channel with a dollar for coffee, cookies and random gadgets for disassembly at:- www.bigclive.co...
This also keeps the channel independent of RU-vid's advertising algorithms allowing it to be a bit more dangerous and naughty.
#ElectronicsCreators

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 894

@hipu 3 года назад

"If the babies get a shock, it serves them right" I forgot how much I love watching this channel

@rimooreg 3 года назад

You can't give 2 thumbs up for a comment, so let this be the second thumbs up. Big Clive's baby remark made me belly laugh and needed to then rewind.

@johnsonlam 3 года назад

I did learn by getting 220V shock, as I remember when I was 8 years old, playing with the socket.

@MadScienceWorkshoppe 3 года назад

Best line of the year I'm pretty sure.

@VeteranVandal 3 года назад

Harsh lessons hopefully come from low currents. If you never get shocked, you'll always be curious about getting shocked, so, let it happen in non-lethal ways.

@phantomkate6 3 года назад

Followed later by "spicy voltages." Love it.

@Kixxs101 3 года назад

If baby gets a shock serves them right... My hero.

@lordjaashin 3 года назад

the only baby here is bigclive himself lol

@77thTrombone 3 года назад

Your comment did not do the statement justice. I read it before the video, then listened while driving home. Glad the Clive's statement came up at a stop-light, as there would've been trouble after I rolled out of the moving car laughing.

@radiohirsch 3 года назад

I didnt expect it and LOLed :)

@prismstudios001 3 года назад

Nobody zaps baby in a corner!

@ian-c.01 3 года назад

Yes they should know better and if they didn't they do now, it's called learning !

@rickseiden1 3 года назад

"If the babies get a shock, it serves them right!" I can see that on the back of a t-shirt, with the Big Clive logo on the front where little t-shirt logos go.

@juncusbufonius 3 года назад

My brother stuck his baby fingers in an Italian 2 pin socket in the 60's and he remembers it.

@ianradcliffe2482 3 года назад

@@juncusbufonius As a toddler in the 60's I stuck my baby folk in a two prong socket, it didn't do the fork much good I seem to remember, but I have been interested in electronics ever since.

@phydeux 3 года назад

Just take my money! (And send the shirt plz)

@tylervanorman492 3 года назад

Count me in for one

@soberhippie 3 года назад

I got shocked when I was about 1.5 yo, that taught me to be careful with stuff

@jimsvideos7201 3 года назад

I wonder if your PCB supplier would blink at running a batch of "Clive's Patented Mk. 2 Type C Baby Zapper" boards.

@jkobain 3 года назад

Well, they in China don't hesitate making «baby heaters» which consist of effectively two electrodes to be put into water and connected to mains AC.

@jimsvideos7201 3 года назад

@@jkobain It's one thing to do it neglegently like that, but where's the charm? Making the gap betweek the two plates just the right size for baby fingers is the only thing I'd change.

@jkobain 3 года назад

@@jimsvideos7201 if Clive can get zapped, I'd say _any_ living child could get zapped as well.

@pooveyfarms 3 года назад

best to put Ralfy's name on it instead, to avoid being put on a list somewhere.

@MostlyInteresting 3 года назад

Next time put "Eludeium Pew 36 Explosive Space Modulator". And see if it flies... :P

@GrumpyGrebo 3 года назад

Fun fact: the URL code for this video starts with "ion". Well played Clive, well played indeed.

@Anvilshock 3 года назад

Had to double-check it's not a lower-case L. It's true!

@uploadJ Год назад

Good catch!

@jeffmorris9893 3 года назад

The actual Russian item might just go for brute force ionization: a square centimeter swath of very pure polonium-210.

@countzero1136 3 года назад

In Russia, the ozone generates YOU :)

@johndododoe1411 3 года назад

They carefully restrict such special materials to special government projects. Though they might be arrogant enough to use other radioactive substances in public use products similar to how some western countries used radium for self-illuminating watch dials. Similar arrogance made them ignore the specific technical dangers that led to the Nedelin and Chernobyl incidents.

@johndododoe1411 3 года назад

@Alex Sickshow I was arguing how unlikely Russia / USSR would be to make that hypothetical polonium ionizer.

@johndododoe1411 3 года назад

@Alex Sickshow The item in the video was titled by Big Clive and he admitted the typo. This thread is about a joke that a real Russian device would use radioactive polonium instead of electricity.

@TWBIAP Год назад

@@johndododoe1411 My guy you can order uranium online.

@johntaylor8072 3 года назад

Good to see you are a fan of Garage54 Clive!

@Aeduo 3 года назад

That is the only place i'm familiar with bmi russian. although do they do anything else or just garage 54 translations?

@tooler731 3 года назад

Would anyone think it even possible that Clive would NOT be?

@wildcodefox7313 3 года назад

I died at that part 🤣 totally unexpected but epic nonetheless

@DizziLife 3 года назад

Love their crazy ideas

@markxr1 3 года назад

I love your impression of Sean Connery doing an impression of a Russian Nukuler Submarine commander :)

@michaelcalvin42 3 года назад

9:53 - "I'm gonna grab a high voltage supply. Probably a low voltage one." I know what you meant, but this confused me for a split second.

@zeekjones1 3 года назад

High? Low? Probably something in the middle then? _The middlest of middles._

@stribs44 3 года назад

As a child I used to "mess with electricity" and had quite a few shocks, now 76, have I learnt, well sort of but still get the odd one. Great listening to you Clive, you are my go to RU-vid relaxer, and information about electronics provider.

@esecallum 3 года назад

you not the only one. i experimented with the spark igniter from gas cookers. 2 inch long arcs. they pack a wallop.

@springford9511 2 года назад

"RU-vid relaxer" - I find that too. That is why I have him on now. Also "Nekkid Watchmaker", and others.

@j1952d 3 года назад

Sewing pins anneal/lose their hardness if you give them a couple of seconds in e.g. a cigarette lighter flame and let them cool. Makes them much easier to cut without wrecking sidecutters.

@railgap 3 года назад

or just buy a pair of hard wire cutters like the excellent Knipex or cheap knockoffs from the other usual tool vendors

@two_tier_gary_rumain 3 года назад

@@railgap Or use a pair of reputable pliers. The type that have the wire/pin/rod cutters on either side of the hinge.

@snakezdewiggle6084 3 года назад

Yep ! Cos they're made of iron, and not steel.

@MeatLeBeef 3 года назад

Otherwise you can use some pliers and just bend them to break at the marked point - you can actually do that pretty accurately. I've personally done that when repairing one of those little egg piercers with the bit of needle sticking out.

@j1952d 3 года назад

@@MeatLeBeef - that works to part it, but it can leave a little kink, or sometimes a split in the metal (so it's bifurcated), which wouldn't fit into the type of IC socket that Clive's using.

@jamesl8053 3 года назад

Just a comment to show appreciation for Clive always warning us before turning the lights back on, I'm light sensitive this allows me to actually close my eyes for a few seconds before, unless you have it you have no idea how bright lights effect migraines and nausea even when its just a quick flash.

@esecallum 3 года назад

YOU CAN TREAT WITH HIGH DOSE VITAMIN D WHICH YOU SEEM TO HAVE A DEFICIENCY OF...

@jamesl8053 3 года назад

@@esecallum its not a deficiency, its to do with my condition.

@esecallum 3 года назад

@@jamesl8053 your too ignorant. go suffer in silence

@peter.stimpel 3 года назад

the most known russian nuclear "corporation" should be Rosatom. And I agree, the silk layer would be much more cold warish with cyrillic letters. Like this project very much

@jkobain 3 года назад

ЯUSSIAИ then. ;D

@aigilea 3 года назад

Rosatom's full name is State Nuclear Energy Corporation "Rosatom", so it's pretty close.

@coast2coast00 3 года назад

@@jkobain Or just roughly spell the english with cyrillic. РУССИАН НЮКЛИР МОЛЕКЮЛАР ДИСРУПТОР

@AlecKristi 3 года назад

РосАтом

@Ithirahad 3 года назад

@@aigilea SNEC Rosatom... hmmmmmm... Snek Rosatom, the radioactive Russian danger noodle.

@alsnow3582 3 года назад

The spelling mistake adds to the authenticity of what I would expect from the Russian Nuclear Corporation selling their wares to the west. If you write an instruction manual, you need to be sure and add even more mistakes 😁 🍺

@Ithirahad 3 года назад

tbh I might expect a bit more professionalism from Rosatom actually :P

@d.t.4523 3 года назад

Write one up for us! 👍

@stevetobias4890 3 года назад

Spelling mistake also typical of the Chinese. Designed by Russia to be manufactured in China, hahaha 🤣

@ellmanncreative 3 года назад

Make sure to add stuff like "Apply power. Machine make ozone." or something like it. :D

@ellmanncreative 3 года назад

@@Ithirahad ... except, this is _in no way_ Росатом despite trying to look that way... :D Which makes it fit perfectly. :D

@obliviousostrich1002 3 года назад

As a child I loved touching our ioniser, watching the arc jumping to my finger was fascinating. My lesson came later in life, accidentally touching the ac socket of an unplugged audio amplifier. It's not the kind of thing you want to feel twice.

@RomstarOrion Год назад

Kind of like french kissing a lamp socket.

@jpolowin0 3 года назад

"Standard" sewing pins and needles are generally regular steel plated with chromium or nickel, in my experience. They're somewhat resistant to rusting unless the coating is broken. If there's, say, a scratch, and the item is in a damp environment, you get rapid corrosion at the scratch. The entire plated area acts as a cathode, and the exposed steel is an anode; there's an electrochemical effect. You can test this by nicking a pin or a needle with a file, and placing it on a bit of tissue that's been dampened with salty water. If the pin or needle hasn't been plated at all, but is entirely non-stainless steel, doing that will tend to show corrosion preferentially where the metal has been most mechanically disturbed, i.e. the pin heads and points. The metal crystals there are most distorted from their lowest energy states, so it's energetically favourable for those atoms to escape in preference to atoms in other parts of the items. Stainless pins and needles *are* findable, but I've found that many that are labelled/advertised as "stainless" are in fact just regular plated steel. The sellers are counting on people not bothering to check, or not finding it worth the trouble of complaining. The reason for using stainless, of course, is that one wouldn't get corrosion even if the surface *is* scratched.

@alexmarshall4331 3 года назад

WOWW !!! WHAT A WIKKID COMMENT/REPLY !!! You're a true tovarisch !!!

@jpolowin0 3 года назад

@@alexmarshall4331 When I was in grad school at university, I taught first-year chemistry labs for a number of years. One of the last sets of experiments for the year was a module on corrosion, which was pretty cool if one paid attention. It involved bits of information from four or five labs the students had done previously, though that wasn't obvious. And unfortunately the lab manual didn't highlight that, and its explanations were pretty poor in general. (Sometimes, even some of my grad-student colleagues couldn't figure out what the manual was trying to explain, and I had to help *them* so they could teach *their* students.) Once a chemistry teacher always a chemistry teacher... :-)

@snakezdewiggle6084 3 года назад

Needles and pins are made of iron, acid- dip profiled, then electroplated.

@alexmarshall4331 3 года назад

@@jpolowin0 A MASSIVE 👍's up...phewee kemystory !!! Keep it up geezah !!!

@stremmify 3 года назад

there is also "standard" titanium oxide(?) plated needles what's your take on those?

@seanet1310 3 года назад

Nice to see the ozone generator proving its working. The PM2.5 drops as the O3 goes up. Good demo

@bigclivedotcom 3 года назад

That's probably electrostatic precipitation.

@johnc3403 3 года назад

I love Big Clive's murray-isms. "..i'm gonna grab a high voltage supply, probably a low voltage one" :D

@opera5714 3 года назад

In 1964 I built an ion helicopter after seeing it in popular mechanics as a glimpse of the future. It was too heavy to take off, but it did make a lot of wind.

@andymouse 3 года назад

Worth adding solder to create a smooth ball or a dome over where you cropped the needle holders on the back, all sharp points are ' Point Emitters ' and this might effect the efficiency, it certainly does in sensitive High Voltage equipment used in the Analytical Science world and the ' Balling ' of high voltage solder joints is a must....cheers.

@ToTheGAMES 3 года назад

Hahaha! Thank you Clive. I love that you watch Garage 54! Hello fellas!

@jkobain 3 года назад

Oh, a jail-see-pee-see-bee factory picture as a jigsaw puzzle? How nice!

@skug978 3 года назад

The perfect little gift to give your nephew and niece when you go visiting family. I'm sure it'll drag them away from their mobiles.

@TheFlameeyes 3 года назад

I got one myself the other week. I actually liked their keychain toys better 😶

@nigozeroichi2501 3 года назад

Pain is a wonderful teacher, my parents would only warn me once, then it was " I warned you, bet you won't do that again" as I'm bawling in severe pain.

@skylined5534 3 года назад

"Now pack those fingers in some ice and here's 50p for the bus!"

@jimhatch14 3 года назад

@@skylined5534 bawling in the severe pain of the spanking..

@iStormUK 3 года назад

Thanks to videos like this, I sorted my dads LED solar garden lights, with a USB powerbank, and fully controllable switch. So yay, I shall repair the ozone layer with this one, next

@DoctorX17 Год назад

I’m impressed that you can both hold the board AND maneuver the solder in one hand while the other moves the iron. I usually need to clamp my board

@lovotcore6946 3 года назад

Getting zapped as a small child made me respect electricity, didn't stop me from fooling around with it, but i never got lit up while fooling around because of the aversion to touching live electrical connections i got from being zapped.

@tactileslut 3 года назад

Didn't mind the teaching jolt from a 240v mistake. DID mind getting a hand caught on the wrong side of a twelve volt short. It looks so tame until all of a sudden it's on fire.

@slapnut892 3 года назад

There's something relaxing about listening to Big C ramble on. He's like that uncle that sits up in the corner of the room in that armchair telling stories about the good old days.

@bonivuselderheart2716 3 года назад

He does have a soothing voice, and the content is entertaining to boot.

@londonuntergunther252 2 года назад

Watching you soldering is like watching one of those stress relief videos. 😲

@CluelessRanchHand 3 года назад

Need a Garage 54 Big Clive collab lol. How many ion thrusters does it take to push a Lada?

@SeanBZA 3 года назад

All of them, and just how many can you fit on the Lada, before you cannot find the car any more.

@dashcamandy2242 3 года назад

Depends on how badly the Lada is wrecked after one of those infamous "Russian-Left-Turn-From-Far-Right-Lane" maneuvers!

@outbackchillin5628 3 года назад

always loved the dexterity of your digits !

@cen7ury 3 года назад

I have always been jealous of your manual dexterity when soldering. I try holding the board and solder in one hand and the iron in the other when nobody is looking, but considering how much trouble I have running the torch, pedal, and filler when TIG welding, I have low hopes that I'll manage to get it right. 😕

@peterbrown6224 3 года назад

Garage 54 reference made me laugh. Truly a man of taste.

@Ayane13b 3 года назад

At mosh peric. I fucking love it. You should keep it like that and let it be "clives touch". No one that doesn't know about the error probably won't notice unless it's read twice or pointed out lol.

@kelvin1316 3 года назад

"If there is any interest in the PCB" Understatement of the year 😉

@jkobain 3 года назад

Apparently, they call it «Rosatom State Nuclear Energy Corporation».

@not_just_burnt 3 года назад

всё верно, приятель :)

@jkobain 3 года назад

@@not_just_burnt we don't even know one another.

@AlecKristi 3 года назад

Actually, on their website it says quite literally: State Corporation of Atomic Energy... cringe.

@thesunexpress 3 года назад

The misspelling adds to its charm!

@paulEG6 3 года назад

The baby shocking part brought back memories of my eldest son who had a habit of turning on the bedroom light at night when he was younger, so we removed the bulb in an attempt to stop him. which led to him flipping the switch then climbing onto the top bunk to investigate why the light wasn’t on and promptly poking his finger into the live light socket. Needless to say, he only did it once!

@meepmorp3569 3 года назад

I don't quite comprehend all that's being said, far from my field of expertise, but this man's accent makes these addicting

@poormanselectronicsbench2021 Год назад

One good use for this build, IMO, could be, an "antistatic" Ion generator similar to a "Zerostat" antistatic gun, for use in cleaning Vinyl albums when cleaning before playing. The "official" Zerostat gun is now $181 USD at Fischer Scientific, I'm lucky to have an original that is about 40 years old now. I'm sure your build is MUCH cheaper than that, and also put it into a handheld project box with a momentary contact push button to power it as you hold it over an albums surface while on the platter, then dusting with your favorite cleaning brush.

@bigclivedotcom Год назад

I think the zerostat may put out alternate polarity as it's squeezed and then released.

@poormanselectronicsbench2021 Год назад

@@bigclivedotcom After examination, you are correct. I guess the next step in your build , as a modification, could be to alternate the ionic charge somehow.👍

@Black3ternity 3 года назад

I just had to laugh out loud. I opened this video in a new tab to "watch after my 8 other tabs are done watching" and paused the video so it can load properly. Usually I have Spotify in the background to listen to some music. Did some work, put on my headphones and pressed "Play" on my keyboard because I wanted to listen to my Weekly Playlist in Spotify. "Grrreeting Comrades" is all I heard with clives lovely voice. That was unexpected. My PC decided to resume playback from this video instead of my Spotify. I think I need this as a ringtone or as an oldschool startup-sound when I log in to my PC.

@1978garfield 3 года назад

Made with love, and lead! That's how you know it's good.

@berndeckenfels 3 года назад

If the babies get a shock, it serves them right. Everybody gets the same chance to learn.

@hoggif 3 года назад

I've watched too much electroboom. I expected the worst when he picked up the unit when powered :)

@1kreature 3 года назад

Aww! No visualization of the airflow with smoke? I was so hoping!

@countzero1136 3 года назад

Remember the hat that the rookie guy wore on "Blue Thunder" with JAFO printed on it? Well we find out in the movie (spoiler alert for 30+ year old movie) that JAFO stands for "Just Another F---ing Observer". With this in mind I think Clive needs to get hats made for his merch with JAFOG printed on it - "Just Another F---ing Ozone Generator" :D That would be so cool on the Staturday livestreams :D

@AM-yj5yc 3 года назад

The mispelled versions are going to be worth a fortune in a few years, don't throw them out!

@LynxCarpathica 3 года назад

the bmirussian reference was awesome. Thanks for making my night, Clive.

@crystalsoulslayer 7 месяцев назад

I love the way you name these little projects. So many watchlists!

@bigclivedotcom 7 месяцев назад

I've been on all the good watchlists from the dawn of the 'net.

@Averna222 3 года назад

Thanks for the ozone test, much appreciated. After looking at more of these in the future it will really help give a visual just how much some of these pump out.

@sincerelyyours7538 3 года назад

Hearing Clive imitate Sean Connery made my day! Very funny Clive! You should be the next James Bond - "soda-streamed, not stirred!"

@reggiep75 3 года назад

I'd do the corrections but also get 'previously known as the Atmoshperic Invigorator' screen printed elsewhere on the boards (for shits & giggles).

@BillyNoMates1974 3 года назад

just watched a video of an ozone generator vs a wasp nest. wow that really knocked out the whole nest quickly. amazing

@KernsJW 3 года назад

Nice, straight forward design

@SmithyScotland 3 года назад

Could the 2 circuit boards be combined in to one gerber file, joined with "mouse bites", to save on the production costs?

@KingOfKYA 3 года назад

Its kinda a luck of the draw thing if they upcharge you because there "separate boards", the best bet is leave then connected then when you get them cut it with a band saw.

@steverpcb 3 года назад

Yes Clive could have paneled them by mouse bites / stamp hole onto the 100mm x 100mm pcb

@matthewmiller6068 3 года назад

Beefing up those pads with solder is one of the few times I might use lead free solder

@AcornElectron 3 года назад

Get that tiny jigsaw done on a live drinking stream

@oiramrepus1337 3 года назад

Garage 54 ... always worth a watch, nice reference :D

@MaverickBlue42 Год назад

You could always get lead free solder.....and I love how the electric charge is sucking all of the particulate matter away from the detector over time.

@bigclivedotcom Год назад

The dust removal is due to the electrostatic precipitation effect. The needles charge the dust negative and it then promptly sticks to the positive electrode.

@brianterry8512 3 года назад

Friend Clive, I have no intention of building this thing, but I had to pause the video to say, "Please don't correct the spelling!" Or, at the very least, offer it as alternative version. That is just too good and it fits so well.

@bigclivedotcom 3 года назад

The original file with spelling mistake is still available.

@steverpcb 3 года назад

Clive, you should have paneled them by stamp hole/mouse bites, that way you would got both boards on one order. The round corners require a gap between the boards so that rules out panel by V groove. You could also have added boarders for the order number to go on, or indicated on the pcb where you want the order number put, put exactly this text where you want the order number to go "JLCJLCJLCJLC".

@notsonominal 3 года назад

they usually add paneling fees if they see sections of the order not connected by copper at all, so more often than not cheaper to order two designs than to panel them in my experience

@bigclivedotcom 3 года назад

I didn't panelise them to get nice clean sides and allow the rounded corners. These were just prototypes.

@bigclivedotcom 3 года назад

@@notsonominal A way round that might be to run a small track through the mouse bite area.

@joshfriesen9401 3 года назад

Can we have a desk and/or studio tour at 1,000,000 subs? By the way, I enjoy watching this channel!

@pgtmr2713 3 года назад

"It serves them right" What a great corporate slogan!

@AmadeuszKlodawski 3 года назад

Nice. Been thinking of getting myself one of those modules to try out, and building something like this seems like a cool project.

@Lemon_Inspector 3 года назад

All these letters got mixed up in my brane, and I was briefly impressed that you got your PCBs made at the Jet Propulsion Lab

@alexmarshall4331 3 года назад

G'morning Clive and all TOVARISCH'S out there!!!

@LiLi-or2gm 3 года назад

Thanks to Clive, I just bought an 'industrial' ozone generator that produces 6000 mg/hr ozone using a replaceable ceramic generator plate. I have a couple places that need a serious cleansing of mold odors and for $60, I couldn't imagine a better solution. The plate has an avg life of 40,000 hrs, and has a timer.

@LiLi-or2gm 3 года назад

UPDATE: Holy crap- this unit produces an insane amount of ozone! A few seconds and it starts to irritate your throat. The ceramic plate looks to be about 2x4 cm and the entire surface glows. It comes with a door hanger that says, "DO NOT ENTER! Ozone sanitation in progress!" I can't wait to take it apart to see what-all is inside! I got this one: www.amazon.com/gp/product/B00JAP7388/ref=ppx_yo_dt_b_asin_image_o01_s00?ie=UTF8&psc=1 Clive, you should do a video one one of these- it is an ozone monster!!

@LiLi-or2gm 3 года назад

UPDATE 2: Just took the lid off. It has a monoblock power supply driving the ceramic plate that has long thin conductors plated onto it. The fan is grounded, too. The ceramic plate generator is attached to a fairly large heatsink. Not much to see in terms of components but the construction is certainly robust!

@lasermike2147 3 года назад

I ran what is probably the same unit in a stinky old car for half an hour. You could smell ozone for days afterward, even after leaving the doors open for a couple of hours.

@bigclivedotcom 3 года назад

@@LiLi-or2gm I looked at the module from a similar unit recently.

@bigclivedotcom 3 года назад

@@LiLi-or2gm At some point you may need to replace the power supply. They seem quite temperamental. But the case and basics are a good start.

@Lucky32Luke 3 года назад

LOL Avid viewer of Garage54 here too. (Voiceover by BMI Russia.)

@Axon-bm2sx Год назад

Love the garage54 bmi Russian reference

@jordanwaeles 3 года назад

Needs russian letters, retro nixie-like modules and big bakelite buttons!

@rimooreg 3 года назад

Well Big Clive is providing the Gerbers you can put glitter on yours if wish.

@litterpicker1431 3 года назад

АТМОЅНРЕЯІС ІИѴІГОЯАТОЯ

@terryloveuk 3 года назад

The jigsaw puzzle seems more up Ralfy's street- when's his birthday, ideal present

@TATICMOOR 3 года назад

I was waiting for you to ZAP yourself, but for someone with fat fingers, you did excellently in not touching the power output. What a lovely breathe of fresh air, LOL... a neat little project Clive, Thanks.

@grdutton 3 года назад

“If Babies get a shock it will serve them right”

@brendanberry7403 3 года назад

I laughed pretty good at the intro, long live Garage 54 comrade!

@sjuas690 Год назад

Fun fact: The Ministry of Medium Machine Building was the Soviet Union’s euphemism for their nuclear industry.

@bloothedog4443 Год назад

I love it when you guys say "that one". Don't take offense, you should hear me speak. I think all languages and dielects are fascinating.

@kriztov265 3 года назад

The big man from the Isle of Man does it again spicy voltages included !!!! I wish I could could give you more thumbs up but im not welsh :) Time for a wee dram to cellorbrate :) Thanks Clive.

@willyarma_uk 3 года назад

Your not the only one to misspell things on the silk screen, I've done it too. I always submit them too early, pretty much every time i spot something afterwards on the next day, I just add another to the order with the corrections if its bad enough, its only a few quid.

@johndododoe1411 2 года назад

For the backwards people in certain colonies, those are 25 mil thick needle tips cut down to a length of 5/16"

@rimooreg 3 года назад

Was having a bit of a troubling day, Sir, your shocked baby remark was exactly what I needed. I think when a funny remark kind of comes quite unexpected, it is even more funny and clever. I appreciate you so much. How thick are those pcb's? They look thicker than any hi volume boards I've come across in recent memory. And your perfect consumable needles/socket solution looked and sounded sturdy and secure.

@bigclivedotcom 3 года назад

Standard 1.6mm laminate.

@rimooreg 3 года назад

Std 1.6. Hmm. LOokEd thicker. Did they come with those beautiful edges and radiii? Almost had a ceramic sound when boards clicked your bench or each other.

@markfergerson2145 3 года назад

If the baby withdraws its hand and cries, it's normal. If it instead reaches in for another zap, it's One Of Us.

@VeteranVandal 3 года назад

@@markfergerson2145 one of us. One of us!

@KentuckyRanger 3 года назад

You had me at Ion Thruster Technology...

@nosaltiesandrooshere7488 3 года назад

👍 Danke fürs Hochladen! 👍 Thanks for uploading! 👍 Very good and beautiful, thank you! 👍 Sehr gut und schön, danke!

@fredflintstone1 3 года назад

Ion thruster on, gamma rays on, yobba rays on :-)

@russellhltn1396 3 года назад

If baby gets a shock, he/she will become an electrician. The world needs more electricians.

@bigclivedotcom 3 года назад

That happens so often.

@BRUXXUS 3 года назад

I love this! Could create a little circuit to power on and off the ion generator intermittently, like the ionic fridge Twinkie. :D

@bigclivedotcom 3 года назад

The best approach is to have it run continuously at a low enough level to match the room.

@MadScienceWorkshoppe 3 года назад

Was thinking similar, but for the kitchen trash bin.

@SeanBZA 3 года назад

@@MadScienceWorkshoppe Just put a switch to run it when the lid is closed. Low power module will not make too much ozone, just enough to kill odour in the semi sealed bin. Open lid and it stops so baby does not get zapped pulling the bag out.

@77thTrombone 3 года назад

"Mish Moneypenny, hand me my lead atomizer for my Russian friend."

@CarlsTechShed 3 года назад

Quick tip: If you add “JLCJLCJLCJLC” anywhere on the silkscreen layer, JLC PCB will automatically place the order number there. I generally place mine under a large component like a connector so it’s hidden when the board is assembled.

@bigclivedotcom 3 года назад

I think you also have to specify it in the order. But it would make sense for them to do it automatically if they saw it.

@mitch3064 3 года назад

Thanks Clive I will have to try this one out.

@JRBlood 3 года назад

Only change I would do is change the wording to "Ion Overthruster Technology". A nod to Buckaroo Banzai :)

@tasmedic 3 года назад

The 'ATMOSHPERE" must have been "dark and stormy" when that PCB was designed.....

@morelenmir 3 года назад

At some point Clive do you think you could do a video where you basically give us a master list of all the handicraft tools and consumable supplies you recommend for both actual soldering but also for making PCB's? I have tried to keep up over the years but it would be massively helpful if you could basically provide a shopping list. It would be a real antidote and dose of reality in contrast with the insulting pie-in-the-sky nonsense we got when eeVBlog did the same thing in the past. I have been away from electronics for a couple of years now but having finally managed to get decent solder again am raring for another crack at it.

@gazzaka 3 года назад

Serves then right, let em learn the hard way !

@StrategyYouDidntKnow 3 года назад

Photo catalytic conversion into ozone is preferred method while regulating out the nitrogen and other contaminants. Alternatively, I think the oxygen can be separated from water for a more pure oxygen content to charge into ozone. I also think you could ozonate the water for better result in electrolysis separation.

@stridermt2k 3 года назад

This looks fantastic Clive! Give those lazy air molecules for what! Much love Technical Family

@AcornElectron 3 года назад

Atmospheric? Or Atmoshperic? Perfect Clive, just perfect! Keep up the good work fella and stay safe.

@hempbear 3 года назад

Proper Chinglish to be compatible with cheap ebay modules :)

@AcornElectron 3 года назад

@@hempbear if Clive had done it intentionally it’d have been a coup! Unfortunately it was just a typical electrical engineering typo.

@brucejenner4800 Год назад

As always, a dry, cynical, look at all things with a buzz. Love it.

@GAMakin 3 года назад

Just the HANDS this Post. Must be a relief, of a kind: No comments on THE BEARD. I had a beard when I met my wife, and kept it for several years... on-again-off-again. She referred to it as her "womb broom" (the sense of the term escaped me) and was sad to see it go, when I finally surrendered to the desire to see AGAIN what my face looked like; hard hit by PISS: Personal Image Syncope Syndrome. That's when the term "Turkey Neck" entered my personal lexicon. BUT... my distress was somewhat tempered when I realized that I still had a chiny-chin-chin. 🐺 Wanted to share an anecdote, pertinent to "appearances". A friend of mine was touring the Rural Southlands of the Colonies on foot two Summers ago. He chanced upon two men who were cutting the front foundation posts of a pole barn. He continued to watch as the two men set a jack to either side of the barn door, and proceeded to raise the front of the barn. That's when my friend, curious as all "get-out", asked what they were up to. They pointed to a nearby Ass (Mule), and explained that everytime they tried to move their Ass into the barn, its ears would hit the lintel. Whereupon it would balk and run away. My friend shrugged and asked: Why didn't you just get a shovel and dig out a half-foot of dirt from the threshold? The two men looked at each other, smirked, thanked my friend and suggested that he move along, they had work to do. He had moved off several paces when he overheard one man say to the other: "Ain't that just like a Brit, thinkin' it's FEET when it's EARS." 😵💥👈 ZAP! God Save the Queen! 👬 🦋

@Deipnosophist_the_Gastronomer 3 года назад

'I spelt it wrong' you spelt it creatively. so elegent ;-)

@reggiep75 3 года назад

I like a lot of project boards but find some of them don't have suitable enough or rigid housing and clunky massive project boxes are too big. A nice vacuformed cover for these type of projects would be massively welcome considering they are easy to make, remake and recycle too. A vacuformed cover with a beard on would be good! As for seeing soldering, it reminds me of when I was a kid and my dad would be repairing TVs, when we did things like that, and didn't just create e-waste or landfill a load of crap!

@Deipnosophist_the_Gastronomer 3 года назад

9:50 And then I'm going to grab a high-voltage supply ... probably a low voltage one Yep.