In this video I'm restoring a very small rusty and deadlocked Gressel bench vise. Its jaws are just 80mm wide. My friend has found this tiny vise on the steel waste and I thought this would be cool for a video.
On first sight it was only seized and had some additional holes. When disassembling I also quickly realized that something on the half round part was not right and after sandblasting I also saw pretty deep damages near the jaws. To disassemble the movable jaw I quickly made a tool to open the vise. There's also a video about that on my second channel „my mechanics insights“, link below.
I closed the two additional holes with slight press fit plugs and closed the gap with welding. After filing the welds flush the two holes completely disappeared.
There was a bit of a mess with the threads at the half round part, so I decided to close them all with very tight press fitted plugs and cut two new M4 threads. That worked very well and these plugs will never ever come out again.
On the other deep damages I decided to weld up new material with cast iron stick welding rod. That was my very first time stick welding. Was a bit tricky to get used to it, but the end result turned out very well. I was able to file and sand all surfaces perfectly clean afterwards.
I decided to paint this vise in a nice red (RAL3011) with white highlights on the lettering.
As the spindle only had very little rust, I was able to clean it very nicely with rust remover, wire brush, some sandpaper and Scotch Brite.
For the remaining parts I first removed the deep pitting, removed the sharp edges, recut the threads and then sandblasted them to remove the remaining rust and make a nice and even texture on the sanded surfaces. To darken all these parts I used the method of hot bluing.
As the rough pattern of the jaws were in pretty good condition I decided to restore them. After a night in the rust remover and a bit of wire brushing the jaws already looked pretty good. I also had to bend them as they were a bit out of shape. As they're just case hardened this worked very well. Then I sanded all the surfaces clean, chamfered all edges and applied cold bluing to darken them.
In the end I'm very happy how this little bench vise has turned out. In my opinion the red looks very nice together with the black steel parts and the shiny sanded surfaces and the white details of the lettering are just the cherry on top.
I hope you like my work and the video.
Link to the vise opener tool video:
• Making a Vise Spreader...
Huge thank you to all of my Patreon supporters and especially to:
Adel AlSaffar
Alex McGeorge
Alfonso Baz
Alistair Moor
Amar.k
Anthony Eufemio
Arron Metcalf
Bendurion
Brenna Redpath
Chris walter
David Barker
Edward Conway
Embiss
Haitham Al Zir
isaac
james lowe
Jean Ceppi
John Shebanow
Joseph Kamps
Josh Ledford
Josh Wasserman
Joshua Bentley
Joshua Scher
Kar Marsten
Kerem Yollu
Lambda GPU Workstations
LordPi
Mellissa Marcus
Monte Gibbs
NoLoneSurvivor
Pat Thrasher
Peter Riddett
potokslow
Robert Brindley
SophieHDLM
Steve Bothe
StevenVR
Tyler Carruth
VaushVidya
Vickie Bligh
Vince Valenti
Will Black
Xavier Carbel
Yale Baker
Yuri Zapuchlak
Adam Holtzclaw
Alex Findlay
Alipasha Sadri
Andrew Phillips
Arni Bjorgvinsson
Benjamin Gouveia
bizzaropanda
Bonnie Williamson
Brett Pitts
Brian Hoerl
Chad Bryant
Charles Copenhaver
Crystal Cash
Damien Fuller-Sutherland
Daniel Trejo
Daniel Varga
Dave Hardware
David Ebert
David P Hruska
David Powell
Grant Daniel
Haley McFadden
Hard_Boiled
Jack Curry
jake meckley
Jason Koi
Jeff Smith
Jeremy Cole
Johan Vergeer
Joël Franusic
Justin Blackwood
Ken Rosso
Kevin Robinson
Kurt Gazow
L Rlta
Lina Machina
Marc Cerisier
Marc Staedelin
Mary Casella
Mellissa McConnell
Micheal Bier
Michael Lamp
Mossy_Forrest
Peter Cyprian
Peter Read
Rebecca Miller
Regis Vincent
Rob
Robert Galyen
Sarah Langlais
Scott Marshall
Stefan Kronander
Steven Michalcewicz
Suiros
Svenja Kuckla
Thanny
Tim Holt
Tom Wallace
Trevor Kam
Tucker Ifft
Victoria Emmenegger
William
My camera:
Panasonic HC-VX11
This is an ASMR style video. Especially made to have the best sound quality, so you can enjoy all the authentic sounds created in the workshop in ASMR style.
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)
„I make a new one“ T-Shirts:
teespring.com/stores/my-mecha...
My Main Channel:
/ mymechanics
My Second Channel:
/ mymechanicsinsights
My Patreon Page:
/ mymechanics
21 ноя 2022
