RV Delamination Repair

Подписаться 17 тыс.

Просмотров 302 тыс.

50% 1

RV Delamination Repair for our fifthwheel nose delamination problem. Thanks to my sister & brother-in-law for helping us out! It took us all day for this project - Chris worked half the day by himself, then I joined for the second half & the other two joined for a couple hours - it was about a 12 hour day for Chris. For full details on this project visit our website: towanderfreely.com/rv-delamina...
If you like what you see, please be sure to Like, Favorite or Share and if you haven’t already, Subscribe - goo.gl/QXeChI
*** GET TO KNOW US BETTER:
Our FAQ page - goo.gl/Dusw5i
Our RV Tour Video - goo.gl/cM8xuy
*** NEW TO RVING? CHECK THESE OUT:
Cost of RV Living (1 Full Year Stats) - goo.gl/SZqjpT
How to Create a RVer Budget - goo.gl/bJZZns
How to Choose an RV (3 Simple Steps) - goo.gl/rrwi66
Our RV Washer/Dryer - goo.gl/ANkmvM
A Full Real Week of RV Living Day 1 - goo.gl/02Q15u
How we Make an Income on the Road - goo.gl/2xQlBw
*** STAY CONNECTED WITH US:
Our website - www.towanderfreely.com
Pinterest - goo.gl/FQpDHy
Instagram - goo.gl/rjfMfU
Facebook - goo.gl/2c80aG
*** BUSINESS INQUIRIES, SPONSORS, COLLABORATION:
towanderfreely@gmail.com
*** A kind thank you to each of you! We wouldn’t still be creating videos if it wasn’t for the thoughtful, supportive viewers like you who have been so encouraging to us! Thank you for watching our channel, and we sincerely hope to meet you on the road some day!
OUTRO Song: “To Wander Freely Theme Song” by Kevin Nelson of Sonorous
*** DISCLAIMERS
FTC Disclosure of Material Connection: In order for us to maintain this channel, some of the links above may be affiliate links. We only recommend products and services we personally use and/or believe will add value to viewers. Thank you for supporting To Wander Freely in this way.
We are Chris & Jen. We are not RV professionals. Consult your RV manual/dealer when making repairs or decisions about your RV.
Nothing we say in our videos is intended to diagnose, treat, cure or prevent disease. Consult your doctor for medical advice.

Опубликовано:

28 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 264

@henrythinks 5 лет назад

I'm a retired RV tech who specialized in repairs such as you tackled. You done good. I would have added a couple of things like milling the cross bracing down and covering the whole nose with a very thin luan plywood and using a rubber undercoating at all seams before putting your aluminum sheeting on with construction adhesive, It may sound like an extra step but it turns the nose of your 5th wheel into a battering ram and helps prevent dents from low hanging branches.. Aluminum dents real easy especially where there is nothing supporting it but insulation.

@denisedanel7062 Год назад

Henry, wondering where are you located and if you’d be willing to help me I have a moldy fifth wheel and back wall we’ve taken off the back wall but the man is helping me and myself we have really no idea what we’re doing I’m in the Denver area

@caseypries7559 2 месяца назад

I'd recommend applying the butyl tape to the backside of the trim. Then you pull the paper as you bend and fasten the trim in place.

@garygronberg4310 2 года назад

I've owned five different sailboats, and one nice travel trailer, and after 40 years of this I can tell you never never use silicone on a camper or a boat. Impossible to get it off, but even if you're able to do the impossible, that means you will have spent an enormous amount of time and effort at something that may never really give you a bond again. Butyl tape however is fantastic.

@douglasstewart8815 5 лет назад

Great job guys! Really appreciate all of the explanation of the process.

@MartinusHouse 7 лет назад

Wow!! Gives us confidence to tackle repairs on our trailer ourselves, too.

@lavaria4037 5 лет назад

My husband and I are literally using this kind of like a template as we got an older camper and (thanks to your video) we realized what was wrong with ours. So this is beyond helpful. Thank you soooooo much.

@mcridr08 5 лет назад

So well done that I used your video to do the same to my trailer. I just finished and It took a total of 3 days to complete and am very pleased with outcome. I to used aluminum as it was easy to acquire with the sizes and the "S" pockets I needed.

@mrinspector2206 4 года назад

I've done this but used FRP panels instead. Much easier, less expensive and no worries about scratching up or denting panels. $32 at home depot for a 4x8 panel. No need for an s-channel bend, just butt up the 2 panels on a cross support and then screw down a metal trim piece and install the vinyl insert.

@fredbarrett5581 2 года назад

How is the FRP holding up after 2 years? Just interested because I wanted to use this the same way but manufacturer specs were against outdoor use due to weather

@bentnickel7487 4 года назад

Thank you for exposing the structure of these campers. The sealing of the seam @7:20 is helping me with another unrelated problem. Thank you for making this video.

@vernonsteinkamp1088 2 года назад

Thanks for taking the time to share your work. I'm rebuilding the front end of an 81 Chevy RV. I was hoping you chalked around the 2 clearance lights you installed.

@pj7484 7 лет назад

Just like to say GOOD JOB! Great crew, wife and I truly enjoy your taking time to share your videos. Safe travels. Pam & Jerry

@ToWanderFreely 7 лет назад

Thanks, Pam & Jerry!

@girlmeetshomestead 7 лет назад

Wow! You guys are brave! That's something we would be a little afraid to tackle. Yet again, we're not the handiest of people. But this RV life is definitely teaching us to be. lol It looks great! I'm sure it's even stronger now. Great job!

@toddseely8371 6 лет назад

Water runs down. I think you should have gone over the bottom not under. Very good job either way. Thanks

@porkchop912 Год назад

With the butyl tape it should be ok but yes ideally you are correct.

@craftingwithjean5599 5 лет назад

Thank you for all the helpful videos. I really appreciate you both.

@agneslarabie8654 2 года назад

Great job , I have to change my rv roof this summer ,I looked at many other video that did there roof and your the only one that did it the proper way and you gave me great advice thank you

@assantemark 6 лет назад

Wow, I would not know where to start. Excellent work and attention to detail.

@beverlyvo728 7 лет назад

It looks awesome!! So impressed with your work on Gladys. God bless you on your travels.

@ToWanderFreely 7 лет назад

Thanks so much, Beverly!

@williamvaughn9870 5 лет назад

You did an excellent job, looks professionally done.

@ayanaali546 Год назад

Wow that looks amazing! Thanks for the material list, it helps out a lot!

@JoseOrtega-xn4mj 3 года назад

Wow 😳 lots of work but happy you did it, good job...I’m sure you saved thousands...

@MrClipper500 6 лет назад

Great video. Never thought that sheet aluminum in place of the Filon would give you such a great result. If/when my camper delaminates at least I now have an idea on how to address the problem.

@arbee5281 11 месяцев назад

Okay.... so.... watched a few so called "delaminate" videos. 1:45 this guys already showing, step by step, how to start the repair. Bravo sir! And thanks for taking the time to do things right! 👍

@doowael 6 лет назад

Excellent job of explaining.

@davidfrost4944 6 лет назад

I've got this in my future, I'm afraid. Thanks taking this on yourself and showing me how.

@michaelprue9024 Год назад

Nice job guys. That was definitely a big job to tackle but you guys did it like pros. I hope you get to enjoy many more seasons in your camper

@thenoneckpeoplerepresentat8074 3 года назад

Great job man. It’s a never ending battle fixing these campers. If the manufacturers left out the fluff and focused on quality, we’d all have more time to enjoying camping instead of working on the trailer.

@perry9492 6 лет назад

Good video, I have a trailer with this problem and am trying to find another trailer for a mother in law cottage. Most of the trailers in her price range have this issue. I have never taken one of the fiberglass skinned trailers apart before, so it was very informative to find out what supports or fails to support the end caps. I grew up with RV's in Florida that had lots of structural issues as a result of water intrusion and resulting rot. As a result of this experience, I bought a used 81 Airstream and repaired it. I figured less to rot in one. They are lower maintenance once you get one in shape and maintain it. They are not very roomy though.

@wererich 5 лет назад

Fantastic video. Thanks! We need to do this so it really helped!

@brijetterom922 3 года назад

This is a great video! We have an extra lite camper with water damage on the front. This gives us a blueprint on how to repair it.

@jerrytalley802 Месяц назад

Nice explanatory video. One thing I’d like to share to help viewers. On the seam you mentioned screwing it, you are supposed to staple it on. I’m not trying to be a know it all, but have been taking a vintage trailer restoration class and rebuilding a 1967 Trailblazer. There’s barely room for staples, but it may still work, but hoping they don’t rub through the top metal. Excellent video regardless

@gpfryguy 4 года назад

Good job! Thank you for sharing the information.

@carolbulsa3564 7 лет назад

Wow, I am impressed! It looks great.

@ToWanderFreely 7 лет назад

Thanks Carol!!

@cpairett 7 лет назад

Awesome. Thanks so much for sharing your repair. I enjoyed watching your thought process on this. You took some of the mystery out of this for all of us :).

@ToWanderFreely 7 лет назад

Glad to be of help!

@HectorPerez-tb8hn 2 года назад

good to see teamwork going on !!

@gypsybelle4757 4 года назад

Outstanding repair! Thank you so much for sharing. Wish I could hire y’all to repair my roof. 😆💪🙌

@wyliehudson8396 5 лет назад

Very well done, informative. Subscribed!

@takayama1638 7 лет назад

Wow, great job! I need to repair just a seal on front of our trailer. This helps.

@ToWanderFreely 7 лет назад

Glad to hear it!

@RVLifeInTheUSA 7 лет назад

Awesome video and repair. Thank you for sharing !

@ScotWalt858 7 лет назад

Looks sharp!! Nicely done.

@ToWanderFreely 7 лет назад

Thanks Scott!

@richmondshipton7079 4 года назад

Great job I have done a lot of things to our RV to

@peterknight8002 Год назад

Thank you. We have the same issue and this will definately help

@christhefistful 6 лет назад

Great job and team work.

@timk.9827 6 лет назад

Wow Lots of work but what a payoff, Great Job!

@reefinnyles 6 лет назад

Nice job. Thanks for sharing 👍

@jyharris 6 лет назад

Very nice and thorough video. Thank you.

@daiman56 7 лет назад

Great repair,it is probably stronger now, than it was originally.

@ToWanderFreely 7 лет назад

That was our hope and I think we accomplished it. Thanks for watching Davie!!

@jimdavis8804 5 лет назад

Great job. Looks Awesome.

@cogalh.1131 7 лет назад

Wow Chris! This was so interesting and I am sure helpful to anyone thinking about doing this. I didn't even know that this fix was possible. Clear explanations of the problem and the fix. Impressive. I wonder if you will choose either a decal of your own or leave it as is, either way will look good.

@ToWanderFreely 7 лет назад

Thanks! I appreciate the kind words and we're relieved that it went well! Not sure about a decal yet, if we go that route I think we'll definitely do one of our own. Thanks for watching!!

@carmenperalta7207 Год назад

Thankyou, so much for this helpful tips on rv repairs..you, make so, easy and very effective ways to make the repairs...budgeting our pockets too

@DrtSqrt 6 лет назад

Fantastic video! Thanks! I'm going to pull the front of my trailer apart this fall and try to repair it. I was wondering how the supports were under the curve. Minimal I see! Nice to see that there wasn't any rot or water damage to the frame and insulation. Hopefully mine is the same. I'm wondering how the aluminum has held up? Does it still look good? I'm worried that getting aluminum light enough to bend into place means that it will also be light enough to get dented (or even punctured) by flying rocks during travel.

@alainouellette8660 5 лет назад

Great job guys !!

@misaelcorral6217 5 лет назад

wow perfect, amazing great job.....

@HectorPerez-tb8hn 2 года назад

We should follow your instructions step by step !! Thanks !!

@wg7644 7 лет назад

Great job very helpful.

@sungkim6923 7 лет назад

Wow look so great. Good job have a great day!

@ToWanderFreely 7 лет назад

Thank you!!

@Desertfox92308 7 лет назад

Good job, very well thought out and executed! I doubt an RV repair place would do as thorough a job.

@ToWanderFreely 7 лет назад

Thanks Norm! That was our plan going into it, we wanted to do something that would turn out to be a better finished product than the RV dealer option. If it holds up over time we will have succeeded. So far, so good. Thanks for watching!

@rena5446 4 года назад

@@ToWanderFreely how is the front of the camper today, 2 yrs later?

@rogerlawson4516 7 лет назад

Great job guys. Looks great.

@ToWanderFreely 7 лет назад

Thanks Roger!

@sharrieball9216 7 лет назад

Whew, quite the project, good job😁

@ToWanderFreely 7 лет назад

Thanks Sharrie!

@JeremysGarage 6 лет назад

awesome job looks great but as far as cutting with tinsnips (they yellow ones) i'm glad you were using the correct color but if you don't cut all the way to the end of the snips and stop befor you will avoid the sharp hooks on the panel . so if you use the snips only 90 percent and then start cutting again it will be smoother.

@DWDinAtlanta 7 лет назад

WOW! Y'all were brave! You did a great job! I'm a new subscriber. Ran across you maybe 6-8 mos ago. I had you video page opened to get some background and get a feel for your channel. Hubby closed down my browser and I couldn't remember you name. I have watched loads of "Wandering" RU-vid channels, trying to find you. I think you were around Crater Lake. Our oldest son lives out there. Just saw your video on the Congaree National Park in SC. I was born & raised in Columbia. Once your video started, I knew I had found you again! So this time I subscribed. LOL

@ToWanderFreely 7 лет назад

It's been a journey for you to get here! So glad that you found us again and are on board this time around!! Thanks for watching!

@seanoleary1979 Год назад

AWESOME! (even 6 years later!)

@AlexanderBotsford 2 месяца назад

That looks really good!

@thomasthesing7452 Год назад

Good job folks, I battled that job on my 2005' class C 5 yrs ago when I bought it, one thing in the rebuild that is a must so everything falls into place is making sure that 1st sheet is square to the nose of the Rv and spaced correctly. I totally rebuilt mine alone I might add, and my placement was off, resulting in the angle trim not covering the side panels. my seam at the top gave way last fall, I've got it striped down and am going to add a 18"x 8' piece of aluminum sheet metal and screw it down, this should lessen the vibration that caused the failure.

@SOGCaptain 7 лет назад

you made it look easy!!! now I miss sugar sands. great video

@ToWanderFreely 7 лет назад

Thanks! We miss Sugar Sands the day we leave that place!!

@MrLetmelogin 7 лет назад

Looks great! Done well.

@ToWanderFreely 7 лет назад

Thanks Robert!

@BC5391 5 лет назад

You might want to go back and seal those lights, that's where my 5th wheel leaked.

@alanosborne1947 4 года назад

I agree BC5391 I was thinking the same thing no gasket or seal behind that light will cause big problem down the road!

@CM-gx8tu 3 года назад

@@alanosborne1947 Had the same problem with my clearance lights, the factory never sealed them. I replaced mine with led lights, over sealed the back of the light

@FlyingFish28 6 лет назад

Great video and great job with the repair.

@ToWanderFreely 6 лет назад

FlyingFish28 Thank you!

@thedude1971 7 лет назад

fantastic video, it looks amazing.

@ToWanderFreely 7 лет назад

Thanks!!

@rjr-yp9uj 7 лет назад

Those clearance lights are a constant source of water leaks. You might want to put some sealant of some kind under them. Maybe use a led bulb and seal the lenses too. Great job- it looks awesome.

@ToWanderFreely 7 лет назад

Good tip, thanks!

@sambuvca22 4 года назад

I found that! You are absolutely correct.

@patrickjobling8676 5 лет назад

Looks like a right propper job ..rah rah .. happy trails 😁

@boydtaylor404 5 лет назад

Great Job. Good Luck

@theroguelesstravelled9042 7 лет назад

Nice job, well done.

@ToWanderFreely 7 лет назад

Thanks!

@BishopAhnya Год назад

Looks good! Good Job!!!

@ginnawitters-evans5156 5 лет назад

Very nice job y'all are fortunate to have been able to have plenty of hands in the job to get it done so it came it professional. The only thing I'd mention is you may want to go back n put some silicone/dicor around wire opening on lights n then run a bead of silicone across the outer edge of light back plate at top n sides leave bottom open. This will keep from getting water into n behind your new panel from a leak n keep water out of back plate. Awesome job!!!

@pjames4413 Год назад

Silicone is not recommended,,, use butyl instead.

@dreams..forlove1402 6 лет назад

Fantastik. You make souper again the profil.mpravo its so perfect.i am so happy.love from greece.

@augiemattheiss 5 лет назад

This is excellent work... you found a shop to make up those aluminum sheets for a retail customer! I have been practicing aluminum brazing, just for the hell of it as you never know.

@jimmallery294 7 лет назад

Nice job!!!!!

@NomadicNative 6 лет назад

Well done!!

@kayault2068 2 года назад

Thanks for sharing.

@jameslaiola4976 5 месяцев назад

Beautiful Job Sir.

@vanmasterflash7153 6 лет назад

Looks great!

@NNYDebbie 7 лет назад

Great job guys. Jen, no flip-flops when working on a project! Yikes, those little toes so exposed. Aunt Glady looks terrific.

@ToWanderFreely 7 лет назад

Thanks Debbie, and good point about the flip flops!! Next time I'll be more construction site approved!! Thanks for watching!

@kevinj8258 7 лет назад

Debbie Alix have to agree. And please use thick gloves next time. That aluminum sheeting is damn heavy and sharp.

@ToWanderFreely 7 лет назад

Right on Kevin, thanks for the tip!

@PatitasViajeras192 2 года назад

wow!! bravo!!! thanks a lot for the video, i will start with the same job!! Saludos from Europe!!

@THETOPGLOCK 5 лет назад

I will admit I was a bit skeptical. You all did a amazing job. Looks fantastic for a diy project.

@rcjuncky 5 лет назад

great job. but I think I would have added some black vapor barrier. behind the panel just to be safe.

@lonewulff36 5 лет назад

Nice Job! When triming the aluminum. You can do a much nicer job by using double stick tap on a thin 1 by for straight edge. Use a trim router with a bearing to ride against straight edge. Will also work on fiberglass. Cuts like butter and True! Also use this fiberglass wheel on grinder to cut those side trim moldings. I also suggest that one puts caulking under the side edges to make contact with wood and underside of aluminum. Can never seal enough. If you squeeze some caulking into that seam where your sliding the flat piece into. It will lube it so they slide together instead of prying it apart. Good job, just some ideas for others. I work with these and know these methods to work well.

@MultiSimard 6 лет назад

super good video < bravo!

@chuckrizzo3972 6 лет назад

Very nice job y'all

@jasonlindstrand7338 5 лет назад

Nice job.

@arlenewolf5260 5 лет назад

I don't know what state you are in, but I hope I run into you if I ever need a serious RV repair. Your repair is obviously much better quality than I would have expected from a RV repair shop.

@dmeyer6994 4 года назад

That's your idea of quality work? Lmao

@arlenewolf5260 4 года назад

@@dmeyer6994 Laugh all you want, my experience in the past has been that many workers at some of the major RV shops were hill billy's at best. It is bad enough that RV's seem to all be made like crap from the start.

@mechanicforlife9468 6 лет назад

Nice Job! Have a look at Eternabond 4" Tape. Does a must better job on seams. Very tidy. Once on, lay a very small bead of chalking on edges. Did a complete 37' RV, especially the roof edges, sky light domes, etc. Cheers

@denisedanel7062 Год назад

Hello, are you still in the business do you have private RV owners… I’m located in Denver Colorado and really need some help can’t find good tech don’t know what I’m doing this is my home and we’ve had to takeoff the back and now will have to takeoff the front fifth wheel lots of mold what a mess

@-Savage- Год назад

Great video

@jerrytalley802 Месяц назад

As you install the metal on the sides, that is also supposed to be tack stapled. They only hold the metal until you put the cap rail on. I am impressed that the cap rail conformed to that major curve without the tool they make to bend j-rail. Nice repair overall. Where did you get your metal? I’m on the East coast and so far can’t find a local camper/metal supplier.

@rockwestfahl 7 лет назад

You guys are good! I think this is a job I would have a hard time tackling. Even so, I am interested in how this works.

@ToWanderFreely 7 лет назад

Thanks Rock! It was fun figuring it out and seeing everything come together. Thanks for watching!

@RuaWaterwalker 5 лет назад

Hi Chris - you guys did a great job, I am having the same problem and just found a supplier on the sheet metal, the only issue I am having is the dimension on the S shaped area, did you do 1" and then 2" on the lip ? I am hoping you are able to answer as I really have to have this done, and thanks again for the tutorial as I have learned alot from it.

@hermes6587 7 лет назад

Very nice work! I would not get a new decal they typically can be a real headache with cracking, lifting, tearing and oxidizing etc. Have you thought about Eternabond tape on some of those seams? Peace & Happy Travels.

@2004FHC 4 года назад

Nice job

@qpoole90 4 года назад

Great job on the repair. Did you run into any issues bending the trim? I’m doing a similar repair and I read lots of things saying that it is a pain to bend that trim without it kinking

@4486xxdawson 4 года назад

Hey guys just a tip if you ever have to cut a long line again in aluminum sheet you can take an axacto knife score a line 2 or 3 times then bend metal and it will snap a perfect line and its much cleaner , just a tip i do capping that way all the time and no wavy line from snips ...