RV Slide Out "Woven" Vinyl Flooring Install (Carpet Replacement) | Easy DIY Upgrade 

Thanks Jon! Hope you’re doing well!

Thank you Loren! This flooring has been so great. You’re gonna love it!

Thanks TJ!!

@EddieAtLarge absolutely I'll have to look at more of your rv how to videos as I will be hopefully getting a camper this spring

Thanks Laurie! We love it!!

Thanks Susie! Yes, we are so fortunate to know you! 😂 That’s the problem with time lapse, can’t edit out my slacking. Of course, if you watch again, you’ll see Ann staring at her phone quite often when I’m outside working. 🤣

@@EddieAtLarge She might be looking at other RU-vids to tell you what to do! LOL

You know, she was getting a little bossy that day. 😛

It has awesome. I think you'll be happy with it as well. Have fun on your project!

😂

Sure! Our dimensions are 48” x 151”. The color is Jubilation. You can also get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

Hey Don. We do still have carpet in the bedroom and will be replacing that as well with the woven vinyl. We’ll be doing a video on that to show the process. ✌🏻

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

Hi Callie! We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound right at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions!

Hi Jennifer! We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

Thanks Brian! We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

No issues! Still love this material!! 👍🏻

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. We did not use any adhesive as the furniture that sits on top all gets screwed to the floor and holds it in place. Also, not much floor prep. There was a thin piece of reflective insulation that was under the carpet. We did remove a ton of carpet staples though and then just cut and placed the new material. Feel free to let me know if you have any other questions.

I would guess there were at least 150-200 staples. We did not try to use the same holes for the furniture, however, we did mark the wall with pencil where the dinette was against it so that we knew where to place it when reinstalling.

We saw this flooring in a friend’s RV and really liked the look of it plus we were able to order it with the edging already installed which made installation easy. The material also is very flexible so it transitions well over the slide edge.

Hello! Because we reinstalled the booth seating on top of the flooring, we only had to secure it in the corner behind the reclining chairs. I just used one small screw that wouldn’t be seen in the corner behind the chairs and our chairs are also secured to the floor with screws. So it is essentially all secured by the furniture. If you have a different setup, then I would recommend small staples or maybe even flooring glue or adhesive made for that application ran along the wall edges. Hope that helps!

Thank you for clarifying! I appreciate it!@@EddieAtLarge

So easy! We sweep with our Dyson hand-held rechargeable and just wipe down every so often with a damp rag. 👍🏻

Thanks!! We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

Thank you for all the information! Could you please just tell us what the size of the slide areea where you replaced the carpeting. It kinda looks like the same size as ours. Thanks so much....again!@@EddieAtLarge

@@user-kl8sc6xp4u Sure! it is 48” x 151”

Ours is not flush either. This material lays down and transitions very well.

@sjackson99 It is waterproof. We did a test letting a puddle of water sit on it for about 20 minutes and it didn’t seep through. The backing is a soft cloth like material (shown in the opening of the video), however, there must be a waterproof layer behind it that can’t be seen.

Hi Kenny, We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We did leave it in the bedroom. Would like to change it out someday though. It did take less than a day. Maybe 6 hours at most. We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We decided not to use any staples as the furniture was holding it down to the subfloor. All furniture is screwed down including the reclining chairs. We did put one screw with washer in the back left corner behind the recliners. Other than that the material is loose, but, doesn’t move around at all.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

Hi Tim, we ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

Hi Lisa! We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

@@EddieAtLarge thank you so much for your response. I will definitely call them once I’m in Florida. I like how yours looks. It looks like you also had some under padding?

We did have some very thin insulation material under the carpet that we left in place. You’re gonna love the change. We are still very happy with ours. So easy to clean and maintain!

The area under the booth seating is held down by the furniture that is screwed into the floor. We only put one screw (with a washer) in the back left corner behind the seats just to hold that in place until the recliners were reinstalled. The recliners are then secured to the slide floor with screws from underneath and that holds the flooring in place for that section. If your setup is different, I would recommend using small staples along the side and rear perimeter or you may want to glue it down along the edges and leave the remaining “floating”

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Check with your local dealer to see if they can order it for you. (We got turned down by a few other dealers). You can also get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

Hi Nick, we ordered ours through our RV dealer in Palm Desert, CA. We were able to get ours cut to the exact size & have the edge bound being that the newer model of our camper has this same material. You can get this same material from Trekwood RV Parts & Supply online though. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

The area under the booth seating is held down by the furniture that is screwed into the floor. We only put one screw (with a washer) in the back left corner behind the seats just to hold that in place until the recliners were reinstalled. The recliners are then secured to the slide floor with screws from underneath and that holds the flooring in place for that section. If your setup is different, I would recommend using small staples along the side and rear perimeter or you may want to glue it down along the edges and leave the remaining “floating”. We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

Part # K665214 S/O-Woven 48” x 151” - Jubilat 7000

Thank you! The silver material is a thin insulation that was already under the carpet (installed at the factory). We just left that in place. We ordered the woven vinyl through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions!

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

The area under the booth seating is held down by the furniture that is screwed into the floor. We only put one screw (with a washer) in the back left corner behind the seats just to hold that in place until the recliners were reinstalled. The recliners are then secured to the slide floor with screws from underneath and that holds the flooring in place for that section. If your setup is different, I would recommend using small staples along the side and rear perimeter or you may want to glue it down along the edges and leave the remaining “floating”

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

Hi Roy, we ordered the woven vinyl through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions!

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

It was way easier to install this. Especially since I was able to get it with the factory edging. And it doesn’t trap the dirt underneath due to the solid (cloth) backing. It is also very easy to keep clean. We just vacuum it with our cordless Dyson vac on a regular basis and then wash it periodically with some mild detergent and water. Been a year and a half now and we still love it!

@@EddieAtLargethank you for the reply. Much appreciated!! Happy RV living to y'all!

How do you get the factory edging?

@walkerhenry8066 We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

It’s called Jubilation Soulful Grey. We ordered it through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

@@EddieAtLarge thank you for replying! I will check with our RV shops and if not look into online.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

Holland RV