RV Water Heater Check Valve Replacement - No Hot Water Diagnosis and Fix

Honeycomb.n.Cattle

Подписаться 466

Просмотров 15 тыс.

50% 1

In this video, we tackle the issue of no hot water in our camper by diagnosing and replacing the failed check valve in the RV water heater. 🚐🔧 If you’re experiencing little or no hot water, this step-by-step guide will help you pinpoint the problem and fix it yourself.
What You'll See:
No Hot Water Diagnosis: Learn how to diagnose the issue of no hot water in your RV.
Check Valve Replacement: Step-by-step process of replacing the failed check valve in the RV water heater.
DIY Tips: Practical tips and insights to help you with the replacement process.
Visual Guide: See what a failed check valve looks like compared to a new one.
Why You'll Love This Video:
Practical Solution: Get a detailed, easy-to-follow guide for fixing the no hot water issue in your RV.
DIY Friendly: Empower yourself with the knowledge to diagnose and replace the check valve yourself.
Educational Content: Understand the workings of your RV water heater and common issues that can arise.
Don't forget to like, comment, and subscribe for more RV maintenance tips, DIY guides, and camping adventures!
#RVRepair #WaterHeaterFix #CheckValveReplacement #DIYRV #CamperMaintenance #RVLife #HotWaterFix #RVWaterHeater #CampingHacks

Хобби

Опубликовано:

25 июн 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@industrialexitstrategist2022 5 месяцев назад

Thank you for the video! I'm dealing with low hot water pressure yet have strong cold water pressure. I also found a leak on the twist plastic end on the check valve. Thanks again! Great video?

@honeycomb.n.cattle3463 Месяц назад

Thank you for the feedback. When I found this problem, I couldn't find any videos addressing the issue and figured it would help. 🙂

@karensataylor508 8 месяцев назад

Thank goodness for your video I watched tons and couldn't figure out my issue but your video helped me put my puzzle together!

@honeycomb.n.cattle3463 3 месяца назад

Glad to hear. I was happy to figure this out and thought it could help people by sharing it.

@jcobra09 11 месяцев назад

I was in the same boat. Hot water for maybe 30sec then nothing. My brother in law had this happen as well, so he said I should pull and check it. Well it ended up shooting out (the inner valve itself) of the brass housing. I ran hot water with great success without the valve the rest of the trip. Bought a new one when we got back home, now I’m putting that in. It is a BITCH to get out. My hot water tank is under a hide a bed. Hard to get to. The impact…. Great idea my friend!

@honeycomb.n.cattle3463 Месяц назад

Thank you for the feedback. I was lucky that mine is located in an easy to reach spot, and there is a panel to remove for access. Happy camping!

@banjeauvi7321 Год назад

Just pulled mine and took the guts out until I can get a new one. Easy fix.

@honeycomb.n.cattle3463 Год назад

For sure.

@donnvall9256 Год назад

Do you mean you took out the guts, re-installed the check valve and are using the water heater until you can get a new check valve? I'm wondering if the system will still work with no check valve guts?

@misc8932 10 месяцев назад

My "T" winterizing diverter went bad. When I took it out and blew into it - it worked fine - but when I connected it to the bottom of the T side and turned on the water it flowed through the other free ports. So blowing into it and turning the knob is not a valid test. :-( I did all of the work of replacing the check valve and only needed to swap the T valve.

@charlesfroeder1035 5 месяцев назад

Mine was in same position at top of tank. It was plastic. I thought at first it was plastic because they went cheap. But after I put the replacement one made of brass in, and it works fine so far, I read on a forum that different metals can fuse together. I did use Teflon tape so there is a barrier between the metals. It’s a 10 gallon Atwood which is aluminum. I think the temperature for electrolysis may be a lot higher than the temperature of the water heater, not sure. I don’t want to take new valve out and put new plastic in, as this was a very difficult job due to the location of the back of the tank. I noticed your replacement was brass and I guess the one you took out was original from factory? What are your thoughts?

@honeycomb.n.cattle3463 Месяц назад

I do believe it was original. I think the Teflon should act as a good barrier for the corrosion. I was grateful that there was a panel to remove for access to the back of mine. I'm glad to hear the video helped. Happy camping. 🙂

@joshualancaster5375 Год назад

What size socket did you use to get it off

@honeycomb.n.cattle3463 Год назад

Was a one inch.

@hermankravchenko6470 Месяц назад

My hot water taps throughout RV are spurring and pushing out air I supposed I need to check that valve and replace it since I am not sure why else would hot water spur when cold water not

@honeycomb.n.cattle3463 Месяц назад

It could be the problem. Have you had a chance to dig into it yet?