Ryan's 10 habits for Speed Modeling in SolidWorks

Подписаться 247 тыс.

Просмотров 24 тыс.

50% 1

#SOLIDWORKS #SWTutorials #LearnSolidWorks
Watch my 1-Hour free course ► bit.ly/SCPFreeWebinar
After that, you should consider checking out my ultimate SolidWorks Course.
After uploading the new webinar for my SolidWorks beginner course, I decided to release this section of the old webinar where I share 10 of the secret moves that help me, model, really fast in SolidWorks. Building these habits will be one of the decision-makers in passing or failing your CSWA exam.
If this video is too fast for you, try one of the exercises for beginners and intermediates
SolidWorks Exercise No 1►
• SolidWorks Tutorial fo...
SolidWorks Exercise No 2►
• SolidWorks Tutorials E...
SolidWorks Exercise No 3►
• SolidWorks Tutorial fo...
SolidWorks Exercise No 4►
• SolidWorks Tutorial- E...
SolidWorks Exercise No 5►
• SolidWorks Tutorials w...
SolidWorks Exercise No 6►
• SolidWorks Tutorials w...
SolidWorks Exercise No 7►
• Fast Pace at 400% - So...
SolidWorks Exercise No 8►
• SolidWorks Exercise No...
Did you know about SOLIDWORKS COURSE PRO? This course will cover PART, ASSEMBLY, DRAWING, RENDERING in SOLIDWORKS as well as some bonus material such as CSWA and CSWP exam material.
----------------------------------------------------------------------------------
Hi, my name is Ryan and I am the owner of SolidWorks Tutorials. A channel that I founded in 2011 out of my passion for SolidWorks and teaching it to others. I also own a website where I post weekly premium and unique tutorials for most beginners and intermediates. You can check them out by going to the links below.
Follow me on:
Website: www.solidworkstutorials.net
Membership: www.solidworkstutorials.net/p...
Tutorials: www.solidworkstutorials.net/p...
Gold members on the website have the luxury of contacting me and my team to ask their SolidWorks related questions for their projects.
Thank you very much for watching my videos. I am doing this for you and your feedback motivates me to do better and more for you. Hope to see you on the website.
Ryan

Опубликовано:

7 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@with-Aryan Год назад

Watch my 1-Hour free webinar if you are a beginner here▶ pages.solidworkstutorials.net/comments

@DanDomanski9 3 года назад

nice video! I like that you're straight to the point without wasting time.

@migp.5984 2 года назад

Thank you. For me, the tip about editing sketch pattern was the usefull one. By the way, instead of right clicking + select midpoint, you can just select the line and solidworks allows you match center line with the point from the context menu. It is more efficient.

@with-Aryan 3 года назад

I have a great webinar that is free and you can watch it here bit.ly/SolidWorksCourseProForBeginners

@vasudeokatdare6530 3 года назад

Good,short & simple !!! Thanks a lot,

@with-Aryan 2 года назад

Glad it helped!

@with-Aryan 3 года назад

Folks, check out my SolidWorks course for Beginners. If you are ready to go all the way in one go, sign up. courses.solidworkstutorials.net/Webinar-Registration?YT&

@HassanBraim 2 года назад

Each time I learn something new with your tuto and tips. I am glad to be subscribed to your channel, Thanks Aryan.

@with-Aryan 2 года назад

Thank you for being a subscriber!

@AdamPNelson 4 месяца назад

Sketching a rectangles center to match the coordinate system typically depends on how the part will be mated and used in the next level assembly. Both methods have their place.

@alirezafatehi5177 3 года назад

What an opening 👍

@tylerhickling6674 3 года назад

Even if i wasn't learning solid works id still watch these vids. They are great

@with-Aryan 3 года назад

thanks for the feedback. Then you are gonna love the woven fence one coming soon

@anactivedesigner 3 года назад

yeah😍😍😍😍😍😍😍😍

@swconsultingandtraining9100 3 года назад

Arc to Line works also ("A"-key). Also, the tangency can be controlled easily. No need to press Escape. Simply return to the start point and move the mouse in a different direction. There are three solution: tangent, complementary tangent and center of the arc coincident to the line. You might want to update the video. :)

@with-Aryan 3 года назад

I feel betrayed not knowing this even after such a long time! This is a game changer haha. Thank you man, I feel like I have to give you a huge respect for this tip.

@swconsultingandtraining9100 3 года назад

@@with-Aryan No problem. You are doing a great service for beginners. If you need to refresh your tips and tricks, let me know.

@with-Aryan 3 года назад

@@swconsultingandtraining9100 i am letting you know. Give me some good tips I will include it in the next video

@Cahangir Год назад

I feel like a newbie finding treasure, thank you both for your contribution. You can't imagine the disturbance i went through every time i had to draw a line after arc ))

@user-ms5tq9dl7v 3 года назад

Thank you!!!!!!!

@with-Aryan 3 года назад

you are welcome

@saisrivatsagunda 3 года назад

Awesome tips

@with-Aryan 3 года назад

you're welcome

@halfnhalf030387 3 года назад

look into the shortcut bar by pressing the "s" key on your keyboard PRO TIP: You can add the "s" key on your mouse gestures too!

@RedGloveFan 3 года назад

Very good video.

@with-Aryan 3 года назад

thanks

@skillup323 2 года назад

Yes, I'm Using Also the Hole Wizard in the sketch pattern I L💔VE It...

@RedGloveFan 3 года назад

Again, great video worth to watch several times. Btw, is that a component of a revolver at habit no 8?

@with-Aryan 3 года назад

It very well could be

@alamimohamednadir8888 2 месяца назад

Man you are the best

@with-Aryan 2 месяца назад

Thank you!

@avitolourenco 3 года назад

I guess pros will make the very first extrude as midplane and thus have all 3 planes to their use. 5:39. Literally makes this query resolved, the next tip solved it

@with-Aryan 3 года назад

it's true. You should do that too Avito

@avitolourenco 3 года назад

@@with-Aryan yep i do do that, but suck in general, another amazing time saver is ctrl + 8. to go normal to the selected surface. helps a ton in sketching.

@ctsugusergroup1397 3 года назад

What kind of keyboard is that I’m looking at around 4:07? Please tell me that’s a 3D motion control knob in the upper left corner of the keyboard.

@with-Aryan 3 года назад

This is a Logitech Craft. Awesome keyboard. Also the knob is customizable

@anactivedesigner 3 года назад

Awesome😊😊😊😊

@with-Aryan 3 года назад

Thank you! Cheers!

@irondiver292 3 года назад

Actually funny. Thanks for the laughs

@with-Aryan 3 года назад

my pleasure

@objection_your_honor 3 года назад

Do you have a video on how to make a part in SW, if you have the part in your hand and can take picture for use as a backdrop?

@with-Aryan 3 года назад

No not exactly, I could consider it tho

@objection_your_honor 3 года назад

@@with-Aryan Found a good one. titled "How to design from a picture in SOLIDWORKS" by Innova Systems here on YT. Thanks.

@faramarzsakhaee5343 3 года назад

👍

@skillup323 2 года назад

I'm Still Trying To Compress My File In features and Properties of the File Too... 💔

@alcidesgarcia7118 2 года назад

Hi Ryan. I greet you from Mexico. Thanks for the tips. I ask: in solidwrks, how can I constrain a reference point? That is, in a solid body I fix a reference point and constrain it, is it allowed? Can you enlighten me? Thank you.

@with-Aryan 2 года назад

im not sure what you are trying to do with it once it's constrainted cause it matters but you can right click on it and FIX it. i need more info

@alcidesgarcia7118 2 года назад

The idea is as follows: Imagine a tube with a diameter of 8 inches and a length of 12 meters. This tube is supported on its lower bed at 5 points and its upper bed supports a pressure of 6,000 kg/m2. I need to determine the reaction force at each point where the pipe rests. Now, the tube is a solid element and my idea is to place 5 reference points on it and constrain those points to obtain the reaction forces. Solidworks allows constraining reference points? And if it allows it, how to do it? I have tried it and it does not allow me, it only allows me to apply point loads at the reference points. Thanks.

@sunnyagro3275 3 года назад

Sir I have question in that model. I was looking at your features bar tree of model. Sir you had used a shell command I m wondering. Sir can u tell me where you did shell command in surface command neither it has thickness nor it has solid body. Then where did

@with-Aryan 3 года назад

you can't do Shell on surface bodies

@sunnyagro3275 3 года назад

@@with-Aryan but in your surface body has shell command

@with-Aryan 3 года назад

@@sunnyagro3275 at what minute?

@sunnyagro3275 3 года назад

@@with-Aryan 1:15 minutes and 18 number feature

@with-Aryan 3 года назад

@@sunnyagro3275 look at the Surface Knit on the design tree 17 and 15 and ... on the list that have first turned my surface into solid body. That's why