Ryobi BP42 Backpack Leaf Blower - Carb Inspection and Adjustment - UPDATED

Internutt 1960

Подписаться 32

Просмотров 10 тыс.

50% 1

Tool for carb adjustment (D- Shaped Driver in set) was purchased as a set - Performance Tool Model Number: W1185 - 6 pc set - Available at numerous retail outlets besides these 2
O'Reily Auto - www.oreillyauto.com/detail/c/...
Menards Hardware - www.oreillyauto.com/detail/c/...
0:00 - Carb Adjustment Screw head Description
2:13 - Carb Disassembly and Inspection
06:52 - Carb Re-installation
13:12 - View of Adjusters & starting and adjusting
20:55 - Another view of adjustment screws

Опубликовано:

7 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@williamclements273 11 месяцев назад

The low speed needle adjustment screw is always nearest the engine, the high speed nearest the air filter. Useful to know when struggling with getting it to idle, respond quickly to acceleration, and run smoothly at full throttle.

@raycook1503 6 месяцев назад

I have the PacMan on my carb, and also the replacement catb too.

@NYLAN557 Год назад

Some of the BP42 Blowers did come with the Pacman Screws to adjust the carburetor. I have one of Ryobi BP42 leaf blowers that came with Pacman screws on the carburetor.

@user-yg9ik1uh2f 6 месяцев назад

Thank you for the great video, but please note that the high speed adjustment screw is on the left side (toward the air filter); the low speed adjustment screw, on the right side (toward the engine). If you were to remove the carburetor and look very closely you would see the adjustment screws marked with an "H" and an "L". Thanks again - the video was very helpful with my replacing the carburetor on my blower.

@CB-shellcracker 2 года назад

Excellent video, very clear and comprehensive. Thank you for taking the time to share your hands on experience with this most troublesome leaf blower.

@rosalieferrel4779 Год назад

I changed the carburetor, fuel lines, prime bulb and spark plug. It started after a little adjustment to the carburetor. Ran fine while using it. Turned it off to refuel. Now it won't start up again. What should I do?

@toddduncan4071 Год назад

You can try turning both the high and low needles all the way in, then turn the high needle (closest to the air cleaner) 1 1/2 turns out, then the low needle (closest to the cylinder) 1 to 1 1/2 turns out and that should get it running although you will need to tune it for the conditions and geographic location/elevation from there.

@Rein_Ciarfella 2 года назад

The make of carburetor sometimes determines what style of adjustment tool is appropriate. Now that you’ve got your adjustments done would you mind turning all three in all the way and count the turns and then report back on those numbers please?

@Internutt2023 Год назад

I'm not sure how helpful that will be due to the possible difference of carbs, elevation you live at, and quality of gasoline that is used, but I will try to check that out in a month or so when I use it again

@apatterson8128 Год назад

My Ryobi BP42 uses Pacman. I noticed yours is a Walbro carb. That's the difference. The carb on mine has no name. Not Walbro or Zama or anything.

@billybonz112 3 месяца назад

Some carbs have different adjustment screws. Some might be pac-man and some may be d-shaped or flathead. Ryobi carbs are replaced constantly so who knows if you buy a used one or garage sale, CHINA, etc.....

@billybonz112 3 месяца назад

I would address that fuel line hose that keeps popping off? If it's that loose, I bet there is an air/fuel leak.... Good video though! Good job...

@santonib1 Год назад

Your Absolutly Correct, Packman dosn't sit in correct I Have a Double D & a single D , The single fit correct , thank You ,

@Exemplar9 Год назад

The gentleman’s comment above is correct when he says some BP-42s come with Pac-Man screws. I have three of these exact blowers and one had a Walbro carb with “D” shaped screws, but the other two had Pac-Man screws; I think they had Zama carbs. So nobody is wrong about Pac-Man screws.