No video :(

Ryobi Multi Tool PCL430 Walk Through and Blade Change

Подписаться 3,9 тыс.

Просмотров 27 тыс.

50% 1

#diy #ryobi #dewalt #toolreviews #tools #fixed #multitool
This video gives you a walk-through of the Ryobi Multi Tool model PCL430. I explain the pros and cons of this tool and show you how to change out the blade. Be sure to like, comment and subscribe if you enjoy this video! Thanks, have a good day!

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@docmakwa 2 месяца назад

I just got one of these during "Ryobi Days" buy the batteries and get a free tool deal. I took it out of the box and it didn't have a manual so I went to the Ryobi site to get one; of course I had to navigate through a bunch of pop-ups and BS before I got to the PDF to print it. Anyway, this video came up near the top when I searched so I watched. I appreciate the many youtubers who educate nimrods like me but some of them are hams who must believe that they are movie stars! Thanks for posting a short and to the point tutorial. Bravo Zulu!

@fixanythingsavemoney 2 месяца назад

Glad the video helped! I'm a big fan of just giving people the information without any of the fluff. Glad you noticed haha. Thanks for watching and for the comment, have a great night!

@erickrosas3399 Год назад

Awsome vid quick n to the point😊

@fixanythingsavemoney Год назад

Thanks for watching and for the kind words! Have a great weekend!

@ichemnutcracker 2 месяца назад

I just got one of these with a battery set from Home Depot and I can barely contain how PO'd I am that Ryobi sells a multitool, at any price point, in 2024 without a quick change lever. This is what I get for ordering online instead of going to the store.

@fixanythingsavemoney 2 месяца назад

I would just return it and get the one with the quick change. Apparently Ryobi does make one if that's what most of your tools are. I don't know the model number but I've gotten a lot of input from people saying they do make one. Thanks for the comment and for watching, let me know how you make out! Have a great day!

@ichemnutcracker 2 месяца назад

@@fixanythingsavemoney Yeah, the only reason I got this is because it was one of the "Get this tool free!" offers with the batteries. I would have had to spend twice as much to get the one with the quick-change, because that is the brushless version that comes with the expensive "HP" batteries that I don't need. But, you are right, I should return it. I think I'm going to get angry every time I look at this thing, I don't need that. Maybe I can have them swap it for a planer or something else. Thanks, though. I appreciated your video. I just wish I had watched it sooner.

@fixanythingsavemoney 2 месяца назад

@ichemnutcracker it definitely should be a standard feature on all of them by now. Especially with how quickly the blades burn out. Good luck with whatever tool you decide to get!

@candicecurry9754 Год назад

You really rushed through the blade change, which is the one thing I needed

@fixanythingsavemoney Год назад

What are you having trouble with? I can probably talk you through it

@ShermVibes 10 месяцев назад

A semi old lady thanks you from Lansing, IL!! ❤

@fixanythingsavemoney 10 месяцев назад

You're welcome! I'm glad the video helped you!! Thanks for watching, have a great night!

@NitaDeGuzman 12 дней назад

I have one of these, but the saw attachments it came with are round all the way around instead of having a notch to allow it to slide into the tool change part. I have to completely unscrew the bolt thing, put the blade on, and then awkwardly tighten it again. It's the same model as yours; i specifically searched for the model and found this video. Any ideas?

@fixanythingsavemoney 12 дней назад

Unfortunately on this model you have to remove the bolt. There are so many other models that offer the quick change feature with a lever you press in and just pull the blade out but on this one it takes a lot longer

@specialkfouryou 7 месяцев назад

Thanks for the vid very helpful! I guess I have a newer model, it is now tooless, much better than fishing for an allen key if you don't put it back etc.

@fixanythingsavemoney 7 месяцев назад

Glad to hear they make one with the quick change feature! Thanks for the comment and for watching! Have a great night!

@EverydayATV 2 месяца назад

@@fixanythingsavemoneyI just bought a new PCL430 from Home Depot and it still has the Allen key.

@fixanythingsavemoney 2 месяца назад

@EverydayATV that's good to know. I bought mine fairly recently so was wondering why people were saying the new models are tooless. I guess it's just different models. Thanks for watching and for the comment, have a great day!

@tinytygar6296 27 дней назад

My hex pin won’t loosen what so ever, brand new machine. Any thoughts that could help?! I put a blade in( used for 4-5 minutes, tried to switch blades and I can’t get the first one off.

@fixanythingsavemoney 26 дней назад

That wrench is in there very tight, try taking some pliers or a screwdriver and getting under it and lifting it up. After taking it out a few times it does loosen up. Hopefully that helps. Thanks for watching, have a great weekend!

@jf860 Год назад

I'm wondering why the Allen wrench has one end ground down to a "pin"? You can only use one end of the wrench (which BTW is 5 mm). My Allen wrench doesn't stay in the slot they provided, especially when the tool is running! Other than that I liked the tool because I never had one and it came FREE when I bought 2 batteries with a charger, it was a great deal since I don't use a multi-tool frequently enough to justify the price.

@fixanythingsavemoney Год назад

That's strange. Mine wasn't like that. Maybe just buy a 5 mm and see if it fits better

@jf860 Год назад

@@fixanythingsavemoney At 1:32 with the key on the table, the long end is a round pin. Anyway I did buy a 5mm key at the hardware store and it's tighter, tho I haven't "road tested" it yet.

@1389Chopin 2 месяца назад

How do you lock the blade from moving. I tighten/seat the blade fine with the hex, when i go to use the entire blade holding assembly shifts - from 12 oclock to say 2 oclock - the holding bolt isnt loose - its like the blade isnt locked in place

@fixanythingsavemoney 2 месяца назад

Is the blade flipped the wrong way? I'm not sure if that would even cause this. Other people have commented on here saying something similar. If you have a different brand of blade maybe try that? Do you know the brand of blade you're currently using?

@fuzzcouchmania5122 7 месяцев назад

Have one and is very underpowered. Pain to change blades. Only use it for soft materials.

@fixanythingsavemoney 7 месяцев назад

I haven't really given it a great test as far as usage. I have a Dewalt Brushless that I use all of the time but thanks for the feedback on it! The blade change on it definitely caught me guard with how long it takes compared to other brands. Thanks for watching and for the comment, have a great day!

@dnicely7444 11 месяцев назад

I take care to seat the blades properly and tighten down as much as I can and even line up the little holes on the sides, but the blades (especially the plunge cut ones) loosen after about a minute. What am I doing wrong, or how can I correct this ? Thanks.

@fixanythingsavemoney 11 месяцев назад

So the bolt is loosening? If that's the case I'm not sure as long as you're tightening it down sufficiently it definitely shouldn't be. If the blade itself is somehow coming loose I'd say maybe try a different brand of blades. Thanks for watching and for the comment! Have a good night!

@dgman3262 9 месяцев назад

Perhaps missing a washer on your screw??

@1jnocian 2 месяца назад

I am having the same issue. I seem to have the same nuts and bolts as this video but mine also comes loose.

@fixanythingsavemoney 2 месяца назад

That's strange. I don't seem to have this problem on mine. Is the blade seated properly?

@GregGray 6 месяцев назад

They make another one with a quick change option.

@fixanythingsavemoney 5 месяцев назад

I uploaded a youtube short on this tool and a lot of people had this same comment. I'm going to have to check out the one with the quick change feature! I thought I bought their newest model but it must have been an older model! Thanks for the comment and for watching, have a great day!

@pmcdbb2351 Год назад

Do you have to use a 4 amp battery? I have a 2 amp battery from prior tools.

@fixanythingsavemoney Год назад

Yes you can! It just won't last as long. Thanks for watching and for the comment, have a great night! If you haven't already and would like to be sure to subscribe to the channel and check out my other tool videos! I have a bunch on ryobi and will be putting more out soon! Thanks again!

@fixanythingsavemoney Год назад

Let me know if you guys have this tool and how you like it! Be sure to leave any questions below and also consider subscribing to see more tool videos and general DIY videos! Thanks for watching, have a great day!

@cuarajhyrojayju4397 Год назад

I can’t remove the blade got stuck I try with the hammer and it doesn’t work help!!

@fixanythingsavemoney Год назад

Were you able to remove the bolt holding the washers in place?

@megandd1797 7 месяцев назад

my Ryobi came with just one blade but its round. Do I have to take out the round piece completely with the hex tool just to put the blade on?

@fixanythingsavemoney 7 месяцев назад

I think I know the blade you're talking about. You can try to just losses the nut and see if the blade will wiggle free but I'm pretty sure you have to remove the nut entirely

@megandd1797 7 месяцев назад

Thank you!@@fixanythingsavemoney

@fixanythingsavemoney 7 месяцев назад

@megandd1797 you're welcome! Thanks for watching, have a great night!

@dgman3262 9 месяцев назад

Just got this multi tool by Ryobi.... disappointed that there is NO quick release. Allen wrench is too troublesome to install and remove the blades.👎

@fixanythingsavemoney 9 месяцев назад

I agree. There are definitely better options on the market. Having to use an Allen wrench to change blades takes way too long if you're going to be using this tool all of the time. Thanks for the comment and for watching, have a great day!

@dgman3262 9 месяцев назад

@@fixanythingsavemoney It's like in the olden days.... when using a key chuck for changing your drill bits on a drill. Thank you for your video!

@fixanythingsavemoney 9 месяцев назад

@@dgman3262 I think I still have a drill chuck in a toolbox somewhere! You're welcome!