RYOBI Rotary Tool FVM51 Lithium Battery With Awful Quick Change Not A Dremel

Подписаться 26 тыс.

Просмотров 18 тыс.

50% 1

RYOBI Rotary Tool FVM51 Lithium Battery With Awful Quick Change Not A Dremel sold only at Home Depot and Direct Tool Outlet
RYOBI introduces the USB Lithium Rotary Tool. The rotary tool features a compact design that delivers more power for any application. The new innovative QuickChange Collet with 4X faster accessory changes, which makes switching accessories quick and easy. This kit comes with 15 accessories for a variety of applications such as carving, sanding, polishing and more. The USB Lithium Rotary Tool is a part of the USB Lithium System that provides compact, portable, rechargeable solutions for cordless power and productivity. This USB Lithium Rotary Tool is backed by the RYOBI 2-Year Manufacturer's Warranty and includes (1) Rotary Tool, (1) USB Lithium Battery, (15) Accessories, (1) Wrench, (1) Accessory Storage Case, (1) USB Cable and Operator's Manuals.
Compact design delivers more power for any application
QuickChange Collet with 4 times faster accessory changes
15 Rotary accessories for a variety of projects
Powered by the RYOBI USB Lithium battery system for portability and minimal downtime
2-year manufacturer's warranty
Includes: FVM51 Rotary Tool, FVB01 USB Lithium Battery, 15 Accessories, Wrench, Accessory Storage Case, USB Cable, and Operator's Manuals

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@MrD50boy Месяц назад

I just got one. If the bit sticks when loosening it by hand, you need to adjust the tightness of the lower part of the quick connect with the wrench where it screws on. There’s a sweet spot where it’ll work as designed. If it’s too tight on the rotary tool, the bit will stick.

@GrandpappyJim Год назад

I just bought mine yesterday and tryed it out. Worked fine for me slick as a whistle. It worked good with my dremel bits as well

@shastastan1935 7 месяцев назад

I use this rotary tool more than any others. I have 2 other ryobi rotary tools that use the +1 18v batteries. I also have some dremels. I like this tool the best because of it's size and weight. I only use it for woodcarving though. I bought the multi lithium battery charger since I have other ryobi lithium battery tools. I dumped the quick change collets and replaced them with dremel collet chucks. Now I can use smaller shaft bits. Life is much easier now. :)

@drscopeify Год назад

The collet is very standard for die grinders, you need to loose it once, move the bit slightly outward then continue to loosen. It's to prevent the bit flying out while in use by having 2 pairs of threads. So you unthread the first, move the bit slightly, then continue to unthread the second pair.

@AdamEdwardGaming 7 месяцев назад

The collet is fine, its the way you are trying to remove the tool bit. the wrench is not even needed to remove the tool bit. Maybe read the instructions, clockwise/anti clockwise unlocks it. If the collet is spinning its clearly not done up properly on the rotary tool... No issues with mine...

@vader10308 8 месяцев назад

Great video! I remember my first time using tools too!

@BlondieSL Год назад

A while back, this was on sale at Home Depot. I bought one and an extra battery. I took it home, loved it and bought a 2nd one and another extra battery. LOL I use this often now and I'm very happy with its power. It achieves full power by using PWM (pulse width modulation). Love this thing. However, that package opener thing, to me is a total waste and this video proves it. I can open these stupid blister packs much faster with just scissors. As for the collets and putting in and removing the bits, I don't know why he's having such a problem. On the 2 tools that I bought, no issues at all. However, I THINK, if memory serves, that the 1st day, I had a similar issue where it wouldn't come out easily, but all I did was to screw the outer piece back and forth a few times and there was a little click. Then, all is fine. Now, there is no issue at all. But then, I don't over tighten when installing a bit. Honestly, it does look like he's really over tightening the bit in the chuck. I just put the shaft in and finger tighten the outer screw. The bit isn't loose at all. Removing is just turning the outer part in the opposite direction and the bit removes easily. hmmmm

@chinzito Год назад

You over tightened the bit with the quick change collet. Also, when you loosen the quick change collet it is important not to open the collet until it stops. I found that it clamps the bit when you loosen the collet all the way until it stops. Tighten the collet on the bit until it clicks and loosen the collet until it breaks free. Give that a try and you’ll find it works great!

@ScrollsawVideo Год назад

Did you miss the part where the chuck was tightened by hand only?

@BlondieSL Год назад

@Sean Stevenson EXACTLY! I bought on when on sale, love it then a few days later, bought another one. I mean, after all, it's best to have one for in the lab and another for the tool chest in the garage. LOL But seriously, I think the problem here is that Ryobi doesn't explain how to use this particular chuck properly. On the 1st one I bought, the very first time I used it, the bit got stuck as I did over tighten by hand. Then I realized the error and did exactly as you suggest here. I tighten only to the point of the click and the bit is locked in place perfectly. Then, just turn the thumb screw the opposite way and the bit comes right out. It's all about knowledge. Also, I do have to say, I can see why this channel doesn't get any likes. This guy is just sarcastic to viewers in their comments. Personally, I'm just going to add this chan to the "don't suggest this channel" list.

@albertlepore1039 Год назад

That quick package tool you showed in the beginning is so slow! Could be faster with dull scissors!

@jrh13-65 Год назад

I like your review. I just recently picked up the 12 volt and had the same issue with the chuck. I have a corded Dremel and I got extra quick change chucks. I use one of them now with the Ryobi cordless. Ryobi's quick change chuck tightens for the bit and the tool as it can be tightened by the wrench at both ends. I found this doesn't work well. I hope Ryobi is reading about this issue. Thanks for your video.

@rescuetweak 8 месяцев назад

I just now bought that cordless one and had the same problem, and I am very familiar with the Dremel and others for sharpening chainsaws as well. Very frustrating I tried everything in the Ryobi video.

@ScrollsawVideo 8 месяцев назад

Ryobi now has a toolless chuck jist like the Dremel version. I bought one a couple months ago and just now remembered getting it. wlwook for the update soon. Thanks for watching.

@pemtax557 Год назад

Tightening the collet way to hard ... not necessary. The collet is getting stuck to inside the collet nut because of deforming caused by too much pressure. Firm, not as tight as you can make it, is typically all you need for this type of tool. Cheers and good luck ...

@ScrollsawVideo Год назад

Thanks, ill keep that tip im mind on the next review that comes with this 'quick change' collet nut.

@davidperry8046 Год назад

Same thing here that quick release doesn’t work hell I can’t even put a bit in it at all. Taking it back asap I’ll try one more.

@jeremynoakes Год назад

I see this on clearance here in Canada for 35 bucks but not to sure if it’s under power or how long the battery is gonna last compared to my Milwaukee m12 rotary tool . They did have a corded ryobi tool for 10 bucks more I might take a better look at because mine is old and on the way out

@jass7981 Год назад

Been trying for an hour to figure out how this quick change bullshit works. Going back to the store to return it for a dremel.

@bradprater4789 8 месяцев назад

I happened to have an actual quick change chuck. Aside from the piece of shit chuck, it's a great cordless rotary tool. I would also suggest ditching the 2ah battery and grabbing a 2 pack of the 3ah batteries. Well worth the $30, when on sale

@wikkidclown1 4 месяца назад

Just based on the fact that he didn't read the directions I'm going to assume he just doesn't know how to use the quick change properly.

@ScrollsawVideo 4 месяца назад

Based of this comment I'm gonna assume that you didn't watch the video.

@nathanwebster2800 Год назад

And their customer service for Ryobi others also nonexistent was on hold for 2 hours no one ever finally gave up

@ACommenterOnYouTube 9 месяцев назад

Mine dont even insert into that quick change collar at all ... taking it back tomorrow

@IconArcade 6 месяцев назад

Same issue here. I think someone else above is suggesting you can use one wrench at the top and one at the bottom to open the chuck a bit more, then it should work fine with the quick change. I don't know if I have a wrench that small though, so right this minute I'm too frustrated to dig around for one. Really disappointed there's no quality control from the factory on the chuck. I naturally assumed the accessories that came in the box would work with the product in the box. 🤷🏻‍♂

@pipoargenti6912 Год назад

Quick Change... yeah suuuuure

@CoolcarMan-qr9zl 8 месяцев назад

I’m Actually Got The same problem but it the opposite The bit it not tight when I turning it because when I press the button it not Turning

@nathanwebster2800 Год назад

How long does it take to charge the battery for the rotary tool

@LogicallyKnot Год назад

Just opened mine and can't get it to open to even insert a tool. What a piece of trash

@BrandtHambrick 7 месяцев назад

I fixed mine with another wrench, one at top and bottom of the chuck to open it back up. After that it seems to work fine. But they have a basic chuck and my corded Dremel chuck work with it as well.

@rw7546 Год назад

I have similar problems with the quick change chuck. (Very disappointed that a GREAT tool has such a crappy holder. Shame on Ryobi quality control. ) I also used a Dremel replacement part.

@ScrollsawVideo Год назад

I noticed at Home Depot that Ryobi has a quick change just like Dremel's.....video coming soon. Thanks for watching.

@jaydeebee3147 10 месяцев назад

How did you take the chuck out?

@ScrollsawVideo 10 месяцев назад

LOL...a few bears and a few pliers

@brianginter2279 Год назад

HAVING EXACT SAME ISSUE

@mikesrcstuff3288 Год назад

Just tap the bit inward with a piece of wood or something not too hard to remove bit. Not rocket science.

8 месяцев назад

When you know how to use this rotary tool, then post....wow...total fail.

@ScrollsawVideo 7 месяцев назад

You didn't like the review?

@Matthew-li7we Год назад

An absolute waste of money this thing was, completely regret buying it.

@nathanwebster2800 Год назад

Quick change is junk

@dappa211 10 месяцев назад

that package opener seems to be struggling a bit. i'd scratch that off my wish list

@ScrollsawVideo 10 месяцев назад

It works but I wont buy another when it dies.

@detroitdan8487 6 месяцев назад

I like the tool. I had the same problem with quick change. small pliers work great for me. For some work in my low ceiling attic it was great. No complaints on battery use, but wouldn't mind another 10%.

@ScrollsawVideo 6 месяцев назад

Thanks for sharing

@richarde9246 Год назад

Push down on the tool

@ScrollsawVideo Год назад

Did you watch the video?

@richarde9246 Год назад

@@ScrollsawVideo yes I did at least I thought so I watch another video and they showed that trick which worked for me . If I I missed something sorry just wanted to help in what worked for me