Тёмный

S1 E7 Cleaning the carb to my 2.5hp Yamaha four stroke outboard (Bahamas) 

Подписаться
Просмотров 13 тыс.
% 715

Thanks for watching! If you want to know more about my journey, I have more info on www.SailingArtha.com. I’m so grateful for my patrons and those who have bought off my wishlist or sent a gift via PayPal. Your support goes a long way in helping me continue to share my adventures.
How many things can go wrong with a carb?! Don’t ask or the problems will never end haha.. In this video I show you an issue with the low speed jet plug, the elbow on the carb that inserts into the fuel line, water in the bowl, how to tell when the float is stuck, how to keep the motor from flooding again, and how to take apart and then install the carb. I call the jets “low speed” and “high speed” but you could also call them pilot and main, respectively. Low speed is in charge for idle-20% throttle and high speed is the rest. Thanks to Ellis on the S/V Booby Trap for first showing me how to clean a carb, and to my dad for helping me tweak the carb frame when he was in town.

Опубликовано:

 

3 июн 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 68   
@stewkingjr
@stewkingjr 14 часов назад
Brave woman rebuilding a carb in the middle of the bay rather than onshore where dropped items are easily retrieved. I like this series.
@davidlawrence8800
@davidlawrence8800 Год назад
I learned (the hard way) that if you put a clean(ish) rag or paper towel on the seat before you disassemble delicate components (like carburetors), the little bits like pins, floats, jets don't bounce as far (like down a scupper and overboard) when they get dropped, and they don't get crud on them from landing on grungy surfaces (like cockpit floors)
@sydhardie9339
@sydhardie9339 Год назад
It totally amazes me how you manage to NOT lose anything overboard while you are working on deck ! You are BRILIANT ! Love from Australia🇦🇺 ⛵🌹
@SailingArtha
@SailingArtha Год назад
Thanks! I've only lost one piece of my outboard and it was the turn tab that attaches to the post that opens and closes the fuel valve. I can still open and close it but it's much more difficult. And then I've lost the #10 socket, which I used all the time..... other than that, I'm pretty good at losing things only inside my boat. Thanks for watching and commenting!
@sydhardie9339
@sydhardie9339 Год назад
@@SailingArtha Thanks for your reply !🌹
@thevernonposse
@thevernonposse 6 месяцев назад
​@@SailingArthathe damn #10 socket it's every mechanics nemesis
@BobDorfman
@BobDorfman Месяц назад
I am amazed. I recall from much younger days when I was rebuilding the carburetor on my used 1967 Oldsmobile Cutlass. I had to take Polaroid photos of each step during disassembly so I’d be able to put it back together. You are a natural mechanic.
@SailingArtha
@SailingArtha Месяц назад
Oh wow!! Polaroid photos. That’s kinda cool hahah thanks for this
@cloidjgreen4386
@cloidjgreen4386 7 дней назад
This was the best video I have come across on this Carb. Great job under difficult conditions
@moneyfornothing3264
@moneyfornothing3264 Год назад
WOW!! You’re crazy. That’s awesome how you’re not afraid to tackle these jobs in the middle of nowhere. Impressive!
@XavierPil
@XavierPil Год назад
You should add in the title: “one handed carb cleaning”!,! You’re awesome
@SailingArtha
@SailingArtha Год назад
Oh my gosh yes haha thank you
@dvdallison
@dvdallison 11 месяцев назад
Haha. In a dinghy bobbing up and down, fixing your carb while trying to film everything and your worried about your finger getting slightly in shot. 😂 don’t worry about a thing. Amazing how you get such great content. Keep the vids coming
@brianclapp3259
@brianclapp3259 Год назад
Might consider when you stop at a marina getting a new float and some replacement jets for both engines. I believe that Yamaha might sell them as a kit available in most boat shops, and probably not that expensive as well. Also might look into a set of magnetic screw drivers, and a precision screwdriver set for those smaller screws. They also sell magnetized parts bowls so that you don't have those screws loose going everywhere while the boat rocks, whether it be the dinghy or on Arta
@robertcolee5075
@robertcolee5075 Год назад
You are absolutely amazing young lady with your knowledge if you ever make it back to the Oriental area, Deepwater slips on the bay river you can leave your boat indefinitely . Engineer and diesel mechanic for 40 years you are very talented for your age.
@SailingArtha
@SailingArtha Год назад
Oriental is my hometown! You might even know my family. Thanks for the invite and for watching!
@garrettdemirjian2489
@garrettdemirjian2489 Год назад
Had all the same problems as you with same exact motor. This video helped me fix motor in Catalina. Thank you.
@SailingArtha
@SailingArtha Год назад
Awesome. I’m so glad it helped you
@DaydreamAboutNiceThings
@DaydreamAboutNiceThings Год назад
You are a rockstar ! I like the way you work on stuff….. raw and fine tune. Great video !
@SailingArtha
@SailingArtha Год назад
thank you!
@jeffmcconniel2838
@jeffmcconniel2838 Год назад
Carb work with one hand on deck of a bobbing boat! You are super-human! Definitely subscribing.
@dadzilla007
@dadzilla007 11 месяцев назад
Some thoughts, the float level is adjustable, however you have seem to have a plastic/foam float. These floats degrade over time, asorbing fuel and slowly becoming heavier. Secondly, the silicon gasket will work, for a time, but unless it's fuel rated it will fail. Dig up the info on your motor, a proper rebuild kit may be available.
@guyzoun
@guyzoun 2 месяца назад
Amazing ! Thank You fo sharing. My new 55 minutes usage 2023 yamaha 2.5 hp never wanted to start today (july 2024). It went in storage mode in October 2023 with premium gas, seafoam and slept in a heated garage. Vertically on a stand. I left the carb full and the gas valve open when I stored it thinking it would always had fresh gas. For a 4 stroke, I am not impressed. I suspect the float sticking and crappy stuff from the assembly line. Engine oil smells gas. It has 5 years warranty, I think I am going to call the dealer. You are great !!!
@SailingArtha
@SailingArtha 2 месяца назад
Hmm.. I’ve always heard it’s best to drain the carb if you’re going to store the motor for long term. I hope you get it sorted out!
@jackshort2033
@jackshort2033 Год назад
So helpful. Thanks for thinking of all of who haven't done this.
@paxwallace8324
@paxwallace8324 Год назад
Actually true that
@maraelia2
@maraelia2 27 дней назад
I’m impressed. Although not uncommon for a female to be mechanically inclined, to do so with one hand with commentary and not being afraid to do it over the water is impressive.
@johneubank237
@johneubank237 Год назад
You did an excellent job, cleaning the carburetor and checking it thoroughly, even if it was one-handed, LOL. I have also use the same welding tip wires for years to clean carburetor, jets on outboard motors. Someone must have taught you how to do this.
@SailingArtha
@SailingArtha Год назад
Yes, I had help from lots of people, showing me lots of different ways and philosophies on cleaning the carb. I prefer the wires because I can poke anything out, and that's also super satisfying. Thanks for watching and complimenting :)
@johneubank237
@johneubank237 Год назад
You are such an incredible person with such bravery and incredible talent. They are very few people in the world as lucky as you are.
@akseakayaker
@akseakayaker 3 месяца назад
I bought this exact same motor for my dingy and has issues with the carburetor too. It became so tiresome that I replaced the Yamaha 2.5 four stroke for an older but low hour Yamaha 2 stroke 2 hp and never a problem. I live down on Martinique
@SailingArtha
@SailingArtha 3 месяца назад
I gotcha. 2 strokes are great! They seem to run for forever
@HenriVineFishing
@HenriVineFishing Год назад
Very helpful video! I'm following your steps to repair mine! 👍
@SailingArtha
@SailingArtha Год назад
Awesome! Glad it’s helpfil
@Mehariman602
@Mehariman602 Год назад
Total respect! If I try stripping the outboard down on the back of the dinghy I ALWAYS drop summat in the water! X
@gibbergrey
@gibbergrey Год назад
Young lady. I do have a few words of advice regarding your carb cleaning informational video and pertaining to real world applications. One: You failed to drop at least 50% of your parts and screws into the water, remember for next time. Two: Work on you powers of telekinesis, so you can also cook dinner at the same time. Three: Speaking of doing to much at once. Second camera could be used to film the cooking of dinner. Four: I didn't want to be harsh, but you didn't fall in, not even once! Honestly, your inspiring and I'm grateful for your sharing. I'm a new viewer and look forward to more. Thanks again, Shawn
@SailingArtha
@SailingArtha Год назад
😂😂😂😂 love this so much. Thanks for the perfect critiques
@cozydram1
@cozydram1 11 месяцев назад
that was amazing how much you know about engines........dads a great teacher....😉 Hey be safe out there.
@danratsnapnames
@danratsnapnames Год назад
Your a marine mechanic also? How are you still single?? Your a keeper in my book !!
@reneehanks9717
@reneehanks9717 3 месяца назад
You are amazing! I can’t believe you did this on a bouncing boat!
@SailingArtha
@SailingArtha 3 месяца назад
Thanks! It was definitely a challenge!
@TurnOffYourTV
@TurnOffYourTV Год назад
Way to go kid. Dig watchin' you problem solve.
@janblok1783
@janblok1783 Год назад
Hey Arta, on the subject of storytelling: we are now seven video's into your boating adventures and I am about to get curious about your story. Who are you? where are you heading to? what has been your boating history? (you appear to have collected ten years of stuff into your boat so I guess you did not start sailing this spring). Are you a solo sailor or are you a member of a floating tribe? It's perfectly fine if you want to hide that all, but it might be an interesting story to tell. Cheers!
@SailingArtha
@SailingArtha Год назад
Hey, thanks for bringing this up. I can put a video together on my story. These are good questions.
@theladyoflife
@theladyoflife Год назад
You are becoming quite the mechanic 🙂
@SailingArtha
@SailingArtha Год назад
Thanks for noticing haha I've got diesel projects up ahead now
@jptravels
@jptravels Год назад
need a boat tour please and thank you.
@SailingArtha
@SailingArtha Год назад
it's coming up!
@fishin4bogey
@fishin4bogey Год назад
My lawnmower does the same thing. Ethanol fuel is a pain in my ass. I have to completely empty the carb when done. Soon enough you'll be able to rebuild that blindfolded.
@SailingArtha
@SailingArtha Год назад
Yea it definitely puts a damper on things. That’s a good idea though - burn out the fuel from the carb after each use. I’m definitely going to start doing that.
@nocluesailing
@nocluesailing Год назад
Hey dont know if anyone has mentioned it but have you checked the float height. As you said the bowl was super full and im wondering if your height is set too high and its flooding the engine. Although i dont have experience with outboards iv had loads of motorcycles that had this issue....... i wrote the entire comment while the video was running and litterally finished as you found the problem 😅😅😅
@janbeber1708
@janbeber1708 2 месяца назад
Thank you it helped me a lot❤
@SailingArtha
@SailingArtha 2 месяца назад
😃
@txvet8474
@txvet8474 Год назад
Great video. You're an amazing woman. Fun to watch.
@arthurboulton4511
@arthurboulton4511 Год назад
AMAZING "STAY SAFE"
@themarinerkommer4371
@themarinerkommer4371 25 дней назад
get yaself a small 12v air compressor with a airtank and blow the carb out with air, it will ensure any gunk is blown out. possibly a can of degreaser or carb cleaner but it dont really matter, the thing you are putting on is the zip starter that goes on top of the cast iron flywheel thats under it. you doing good by the way.
@wadenone2861
@wadenone2861 Год назад
Can be converted to external tank with inline filter
@SailingArtha
@SailingArtha Год назад
Okay I’d be interested in doing this
@allanwhite8422
@allanwhite8422 Год назад
@@SailingArtha Way to go so long as the carby can lift the fuel, currently it is flooded by virtue of the overhead tank. Just something to check.
@colincox2058
@colincox2058 Год назад
Hello when screwing the brass jet part back in should you fully tighten this ? Having difficulty getting my engine to idle with choke in
@SailingArtha
@SailingArtha Год назад
For mine the high speed sits in and I screw the high speed cap all the way tight. I haven't cleaned it in a while because I have the low speed plugged up, so I can't remember, but I think my low speed screws in and I tightened so it was snug. Then there is a cap that pops in on top. I can't speak to jet adjustment because I don't know much about it. I've heard some people count how many turns if it's threaded, but I'm not sure about this and I never did this on mine and it ran fine. I am no expert, but if you're having problems idling, check your idle screw. It might be idling too low. You can easily adjust this with a screw driver and run the motor until you get it right. Another thing to check is your low speed jet, making sure the cap (if it's a pop-in cap) isn't leaking. On my carb, the low speed gets its fuel from the high speed. When the cap was leaking, the motor wouldn't get above idle speed because it was getting too much fuel and essentially flooding. Hope this helps. I don't regularly read YT responses so you can always message me on IG or FB.
@colincox2058
@colincox2058 Год назад
@@SailingArtha that’s brilliant thank you - much appreciated
@tnllifeunedited9165
@tnllifeunedited9165 Год назад
🌈🌅⛵
@themarinerkommer4371
@themarinerkommer4371 25 дней назад
ethanol fuel aint the best of fuels and in a marine environment you will have water issues as ethanol is water based. try to find non ethanol fuel if you can.
@sitarkhani
@sitarkhani 6 месяцев назад
Ummmmm , ok. One way to work on an engine. Interesting.
@SailingArtha
@SailingArtha 4 месяца назад
Haha!