S19 J Pro Running Quieter AND Cooler - Bitcoin Miner Fan Upgrade

Подписаться 27 тыс.

Просмотров 61 тыс.

50% 1

Bitcoin Mining is Loud.
(NEW VERSION HERE: • Heating a Garage With ... )
You can replace the loud fans on your S19j Pro with this big 8" duct fan and a 3d printed shroud kit from Fruits and Associates!
This makes it so you can direct the heat to where you want it to go - and also knocks 20 decibels off of the noise your ASIC miner will produce!
LINKS:
Fan Spoofers: amzn.to/43AqkFP
BEST PLACE TO BUY BITCOIN MINERS: Musk Miners
blake@muskminers.com (tell them you heard from me please)
or find them on my discord, they have a section in there.. My Discord: / discord
The 3d Printed Shrouds from Fruits and Associates: amzn.to/3acm4pp
They have a Whatsminer kit also: www.ebay.com/i...
The Big Quiet Fan: amzn.to/3PjZbPR
8" ducts: amzn.to/3ArVCTu
My Twitter: / _spacewarehouse
Instagram @nicholas_james_johnson
My Discord: / discord
#bitcoin #mining #noise

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 285

@jasonpennypacker831 Год назад

My biggest problem isn’t the noise, it’s having to replace at least one of the fans every month. I never know which fan is failing because they continue to spin at the same velocity so I end up Replacing one fan at a time until I find the failing fan. This is an annoying and tedious process. So this shroud and air intake is a muchhhhhhhh better setup. You sir have saved hours of my Life replacing fans! :)

@KeeganTV Год назад

If you have a jpro, the latest firmware tells you exactly which fan is bad in the log

@hristo7777 5 месяцев назад

@@KeeganTV I never had antminer fan die so far, about 3 years running 3-4 asics at same time, so about 120 months total

@wolfactual9190 2 года назад

I’ve been using these 6 inch AC infinity fans since October last year non stop. I also use a muffler that they also offer to further reduce the noise. I’m very pleased with their products. It changed the game for my Bitcoin miner.

@NadoJoe 2 года назад

I have the same. I call it the silencer. I have on on each side and one 8” blower in each side.

@NadoJoe 2 года назад

Did u keep your fans on? Mine are still on. Keeps my kds’s at 78/80 at 7/8 blower settings.

@thesni100 Год назад

do u mind sharing the link for the mufflers?

@iamkamsai 2 года назад

This seems to be the best one yet.

@crittenb7 2 года назад

Keep it up! There's no one in mining making this style of consumer content.

@losingwithlarry1398 2 года назад

thing i love about the ac infinity fans are that you can put your temp probe on the exhaust and set the fan to run at level 6 but when temp comes up like in the afternoon you can set a high temp limit and it will auto ramp up to level 10

@SPACEDESIGNWAREHOUSE 2 года назад

Is that an add on for the fan? These just came with the little remote with one button on it.

@losingwithlarry1398 2 года назад

@@SPACEDESIGNWAREHOUSE you can buy the fan with the basic controller or get controller 67 or 69

@lincc9681 Год назад

Hey just wondering if you still do that, recently got this set up and loving it so far. Curious what temp thresholds you use to dictate fanspeed.

@craigsmethurst4713 Год назад

I couldn't work out the controller. How did u manage to set it to do that?

@majidmobarhan Год назад

Hello my friend There are a few points: 1. Power fan should be removed to reduce noise. 2. You can use the kitchen hood fan, which is much cheaper than this fan. 3. You can use MDF to make the body, I usually use cardboard chips. At the price of US dollars, I will spend at least 15 dollars to silence the miner.

@SPACEDESIGNWAREHOUSE Год назад

A kitchen hood fan is strong enough to handle 500CFM?

@oldschoolshawn 2 года назад

Nice product. I have a few of these fans and they have held up well so far. I would like to get a few of these ducts if I could get it with the outlet duct the same size as the inlet though. They make that same fan but with a temp control module that ramps the fan up or down based on temperature. Maybe you could put the temp probe at the outlet and set it to a temp that the hash boards would be happy with.

@fullyelectric 2 года назад

SDW man you rock! I was thinking of doing this same thing just buying the dual to 8” and getting 8” vent fans with auto thermal control; however I have a few S17’s as well and the PSU fans are Very high pitch and needs to be removed as well so I would need a more custom intake that supports not just the hashboards but also the PSU with one big fan feeding both! Anyways hope someone builds my idea .. would be perfect! and their is no need for exhaust shroud if you’re miner is in a hot and cold type setup.. just stick the hot side in the hot box!

@roadracer46 2 года назад

Thanks for trying these different solutions. Have a good 4th and thank you for your service!

@SPACEDESIGNWAREHOUSE 2 года назад

It’s my pleasure! And it looks like we’re going to sneak out to Disney World for dinner at the Yak and Yeti!

@CryptoMiningInsider Год назад

Very nice NOISE Improvement - I may need this soon

@njcrypto7673 2 года назад

I've used that same fan for my crypto mining tent. Non-stop @speed 7/8 for about 14 months. Zero issues. That fan will stand the test of time, I also believe it has a 5 year warranty.

@SPACEDESIGNWAREHOUSE 2 года назад

That is amazing to hear!! I may convert all my machines to this setup, they run cooler!

@ishudshutup 2 года назад

Yes you did it! The improvement I'd recommend is putting another inline fan on the exhaust side and then add ducting to it. I bet you'd be able to run things at half speed and be very silent and cool. Next video?

@SPACEDESIGNWAREHOUSE 2 года назад

I've got another fan and another 8" shroud - Ill try it out!

@osthyvel100 2 года назад

Adding another is overkill. The original fans moves just somewhere around 500 CFM in total. The thing about lower temps isn’t as necessary as many tend to think.. the reason is that an x19 optimal chip temperature is around 72-77. So basically the only reason I see to add another fan is to increase the static pressure to be able to move the air in a longer duct or to be able to overlock it a bit on air

@osthyvel100 2 года назад

@@SPACEDESIGNWAREHOUSE ohh and btw . Regarding the abnormal heat on top due to the decrease in size of the duct is everything but good for the health of the machine. back pressure will slowly but surely damage and or kill the hash boards in the long run. I don’t understand how some can supply it like that. If anything the outlet should be bigger than the inlet!

@garretlevi 2 года назад

Can't wait to connect to my central air duct work and heat my house with it this winter, lol

@SPACEDESIGNWAREHOUSE 2 года назад

I surely wish I lived somewhere other than Florida to be able to make use of this plan!

@hiddencorners1630 2 года назад

I have 6 of those AC Infiniti fans. They run at max speed 24 hrs a day and have been running that way for over 8 months. They are very good fans from my use with them.

@SPACEDESIGNWAREHOUSE 2 года назад

I was hoping to hear from someone whos used these long term.. Thats really nice to hear! This is a really good noise/heat solution then! I mean, really.. Everyone who lives north of florida should buy a bitcoin miner now that theyre cheap, simply to supplement the heat in their house - even in a shit market, they run for free - and when the market recovers, they make a bunch of money

@hiddencorners1630 2 года назад

You can't look at the market for how it is now. You have to look at it from the perspective of what you think it will be in the future. If you believe Bitcoin will eventually hit a new all time high then now is the time to buy and mine. I use mu AC Infinity fans in a grow tent to cool my 38 GPUs. It works fairly well. I live in Alabama so my weather is similar.

@lionking888555 Год назад

@hiddencorners1630 have you tried using AC Infinity on the exhaust side? My thought is the miner will act as a buffer and reduce the noise even more without needing to have anything on the intake side. AC Infinity would also be connected to a duct to take hot air out. Some say it may reduce the life of the fan…

@hiddencorners1630 Год назад

@@lionking888555 I always have one on each side. To push and pull. Pull fresh air from outside and push the hot air back out. The screen on my window acts as a natural filter also.

@garretlevi 2 года назад

Bro, I've have been trying to jerry rig up a set up like this for a while with little success. Thanks so much for this vid, I'm literally gonna snag one of these kits right now!

@SPACEDESIGNWAREHOUSE 2 года назад

I love that! Youre welcome! Ive spent the day messing with overclocks using this thing cranked up all the way - I can pretty much get the same temps as under immersion cooling.. Its nuts!

@lancesmith5645 4 месяца назад

the difference in duct sizes is an issue, the other issue is that the lengths of flexable duct contains dead air, which the fan has to push, after pushing through your box. basically, you may need a small draw fan, or a shorter duct.

@johncummings9621 2 года назад

I've experienced that most hose clamps that have the "flat head" screw, usually also take an 8mm socket fairly well. Just a tip.

@SPACEDESIGNWAREHOUSE 2 года назад

Very nice!

@andersontucker5522 2 года назад

If I had a bunch of ASICS, this is what I would do. The temps are perfect. Imagine if you could have just a bunch of ducts. Great stuff

@SPACEDESIGNWAREHOUSE 2 года назад

It really does make me wish I lived further north. In the winter I’m going to bring a couple of these up to my brothers Minnesota Lake House and see if I can stop his furnace from running for a week

@minutemanprep 2 года назад

Love your channel and content. Thanks for always sharing :)

@sanfranciscotribe9345 2 года назад

Love the idea! Huge for the industry

@anonyzious 4 месяца назад

Great quality video!

@TheWalletSource 2 года назад

Nice content bro, channel is getting better

@alanlees6779 Год назад

i have now received everything i need to do this now so will atempt this hopefully tomorrow i just dont want to turn it off while the going is good with BTC lol

@sandor866 2 года назад

Just installed this on mine and what a difference. So quiet in comparison

@SPACEDESIGNWAREHOUSE 2 года назад

Its incredible!

@RyanMah34 2 года назад

Ac infinity makes solid inline fans, can vouch.

@chickmagnet6004 Год назад

The heat is was going into the control board because you are blowing air through it vs sucking it away. It was as getting restricted and going up like heat does. If you suck the heat out it’ll be much more effective

@SPACEDESIGNWAREHOUSE Год назад

Yep, it was a trade off where if I suck instead of blow, now I’m sucking 130 degree air through a plastic fan for ever and ever. It’s an HVAC fan so it’s probably made it get hot but all moving electronics last longer when they stay cooler. I just keep the top off of the control board and everything stays happy

@chickmagnet6004 Год назад

@@SPACEDESIGNWAREHOUSE ah I see, that makes sense although the AC Infiniti fans are built to withstand high temps. My buddy has had a 10” sucking on a L7 for over a 1yr straight and still kicking!

@MrDarryl90210 2 года назад

My buddy works at the huge Whinstone mine outside of Austin, TX and he told me the sound is so loud in each building that you cannot hear someone standing right next to you talk unless they shout. Sounds like the s19 miner you have is just as loud without the air connectors.

@SPACEDESIGNWAREHOUSE 2 года назад

Yep, they are insanely loud when they’re stock, but it’s all fan noise! They have four fans that all run at 6000rpm

@thejimd 2 года назад

Next video: How to add NOS to your S19j

@0x3DL 2 года назад

I like all your noise reduction benchmark experiments, great and productive time to add value to BTC mining. cheers bud !

@SPACEDESIGNWAREHOUSE 2 года назад

Thanks!! I like that 3doritosLater must have already been taken, and you had to go with 3DoritosLater2!

@0x3DL 2 года назад

@@SPACEDESIGNWAREHOUSE lol, no, that was mine too, I forgot the 2FA access to it....I rugged myself .

@LarsLarsen77 Год назад

You should leave the top on, it was engineered so air blows up into the control board to cool it. As long as the air stays moving it's fine.

@SPACEDESIGNWAREHOUSE Год назад

It doesn’t look like it. It was engineered with fans on the front and back, which means there is neutral pressure in the middle, which means almost no (very hot) air would go up there because that would require air pressure. If the design implied air moving through the control board then the fans on the back would have to run slower than the ones on the front, or there would need to be a deflector inside the case to shoot air up and in there, and neither of those are present.

@TheHobbyistMiner 2 года назад

Hey hey! Do you have a link to the dummy fan plugs?

@SPACEDESIGNWAREHOUSE 2 года назад

These ones came with the shrouds, but I’ll email the guy and see if he’ll tell me where he gets them..

@TheHobbyistMiner 2 года назад

@@SPACEDESIGNWAREHOUSE I found ones off amazon that look identical to yours. Going to get that setup to work inside the Cryptology Consulting Box. No ASIC Fans.

@SPACEDESIGNWAREHOUSE 2 года назад

@@TheHobbyistMiner ooo smart combo! Perhaps I’ll try the same.. I did modify that box a bit to connect a shroud inside, sticking out the back

@haroldreynoldsii9857 Год назад

Thank you for this info

@andrewkeipert6355 2 года назад

Great vid mate!!!

@magicdoty 2 года назад

I am a huge Fan. Pun intended. Commenting to help your algorithm

@SPACEDESIGNWAREHOUSE 2 года назад

Those fans were so BIG!! Appreciate your help!

@scooby8083 2 года назад

Very helpful thank you

@revacid0407 2 года назад

ac infinity s8 L10 Life Expectancy 67,000 Hours ( 7 years) - I love ac infinity I have 4 of the s8 and 6 of the T16 shutter fans some over a year.

@SPACEDESIGNWAREHOUSE 2 года назад

Thats VERY nice to hear... Im going to outfit all 7 of my machines with this setup

@theaquariancontrarian3316 2 года назад

Paste heat sinks on the side of the miner then lie it on its side and the heat won't affect the electronic board as much.

@SPACEDESIGNWAREHOUSE 2 года назад

Clever! I actually just bought a bunch of heat syncs to mess around with for some GPU experiments

@fullyelectric 2 года назад

SDW where have you been! Hope all is well .. BTW I was looking at my AC infinity fan and I noticed it has a 10” to 8” reducer on it, what if you get them to 3D print a dual fan to 10” shroud with clamp section, this would also reduce the overall length and better in Rush flow from the fan, plus better support for the PSU fan when they add the ports for it no?

@yvonnadeau2331 2 года назад

Red Fox has been using them 8" fans, maybe check him out. imo it's needs 8" min at Both ends. i like, now i gotta get a asic... lol hey, nice s19... Thx for the vid

@jsbitmining Год назад

GREAT!

@surenbono6063 8 дней назад

..what about experiments with really huge pure copper heatsink...like as big as a car...passive no fan no kWh..relay cycle start 30m interval + 5 min cooldown

@ManishSingh-cu5nu 2 года назад

great reviews buddy. much appreciated. can you test the LiteSound box?

@SPACEDESIGNWAREHOUSE 2 года назад

I havent heard of that, Ill reach out!

@BradyPatterson 2 года назад

Very cool. From a flow standpoint, this seems wrong but cool anyway. If anything, the 8 inch should be the outflow. Can you reverse it so it sucks through the machine rather than pushes and swap the 6 inch to the intake?

@SPACEDESIGNWAREHOUSE 2 года назад

Yep, you can. That would ultimately be better for the miner I think? Probably lower the life of the fan having 130 degree air blow through it 24 hours a day

@BradyPatterson 2 года назад

@@SPACEDESIGNWAREHOUSE maybe, but it would improve the heat removal I think. I feel like the advantage of having better airflow would outweigh the fan replacement cost. Have to run some numbers to figure that out. I think this is a neat system but adding a bottleneck like a smaller outake is odd

@SPACEDESIGNWAREHOUSE 2 года назад

@@BradyPatterson yeah, I’ve taken it off for mine, just running the back side wide open

@B_radoncrypto 2 года назад

Wow mate your so creative

@SPACEDESIGNWAREHOUSE 2 года назад

B Rad! Tell me the price is coming back up this year!

@gixxerclay7349 2 года назад

I wonder if you could just get 2 8" shrouds, one for intake and the other for outtake, instead of using the 6" for the outtake.

@SPACEDESIGNWAREHOUSE 2 года назад

You definitely could. You could contact jfruits@fruits-us.com and I’ll bet he would arrange for two 8” ducts.

@jfruits1 2 года назад

@@SPACEDESIGNWAREHOUSE yes, we do offer the 8” if you prefer.

@JeviAndradi 5 месяцев назад

For the box to hold the noizy s21

@mrblue1933 Год назад

Wall decor please.... Great Vid!

@LeonardCooperman 2 года назад

Very nice!

@joac21 7 месяцев назад

Just did this with a S19 XP and the miner oveheats after 5 minutes, even with the fan at the Max setting. any suggestions ? thanks

@SPACEDESIGNWAREHOUSE 7 месяцев назад

I am positive SOMETHING has to just be on backwards or you missed a step because these machines run MUCH MUCH MUCH cooler this way.. if your fan an AC Infinity? Is your fan 8”? The 6 inch version of this setup isn’t enough for the XP. If your fan blowing from the side where your power plugs go in, through the miner and out the other side, unobstructed? Or with 8” tubing? Is the tubing exceptionally long? How hot is the room it’s in?

@abboudkarim 10 месяцев назад

Trying a Toroidal Fan would be intresting

@Vincent_C Год назад

Thank you for this video. It makes sense that a bigger fan would be more efficient, can you confirm this to be true? Specs of fans say 12V 230W (Im guessing this is the max setting), can you run a power meter on a stock setup vs with the Big fan with the same frequency configurations?

@plainvi3wmining422 2 года назад

THAT is an AMlogic board. It is why you needed spoofers. With the Beagle Bone Boards you can disable fans with FW. Now I see, G damnit. Now. I. See

@wayneo7220 2 года назад

I don't understand the logic of reducing the outlet side to 6" and having heat back up into the miner.

@SPACEDESIGNWAREHOUSE 2 года назад

I think it has something to do with 6" ducting being more standard. I agree, though. 8" all the way!

@akmala8215 8 месяцев назад

What happen if reverse the air flow , front in to out and then back side out to in?

@ProfilaktiskasLT 11 месяцев назад

Do anyone knows, what happens to the miner, IF inline fan fails? Factory default the PCB reached 85C will shutdown, but at this point of temp in PCB the chips are already melted, because at PCB 45-55C chips stay on 70C

@vp5273 2 года назад

Why you don't do it on the opposite side take the hot air out with the big fan?

@shakester2010 2 года назад

Liquid immersion.

@stuarth1776 2 года назад

Love the video man, but I’m wondering would the asic such down if your fan shuts off?

@SPACEDESIGNWAREHOUSE 2 года назад

Yep, I tested it to make sure. Probably should have included that in the video but I wasn’t filming at the time. It does shut itself down the moment the chips hit 90c

@gamingdazzler9982 11 месяцев назад

reduce the length of exaust tube, than it will b fine

@denverdebes4066 Год назад

What chip temp do you aim for with this set up? Got the same thing going now on low power mode to heat the house, but setting 4 on the fan lets it climb to around 88, while setting 5 brings it down to 80 but is suddenly noticeable sound wise.

@inbae8385 2 года назад

Great contents! This is exactly what I was looking for! May I ask you where can I find that "little fan spoofers"? thanks!!!

@SPACEDESIGNWAREHOUSE 2 года назад

Thanks!! You get get them on Amazon, here’s a link. amzn.to/3RikKkK

@inbae8385 2 года назад

@@SPACEDESIGNWAREHOUSE thank you😄👍

@SerpentXTech 2 года назад

Do you know if they will make on for the Whatsminer M30S++ models?

@SPACEDESIGNWAREHOUSE 2 года назад

I’m pretty sure cryptocloaks has one for those. USE SHORTER SCREWS

@SerpentXTech 2 года назад

@@SPACEDESIGNWAREHOUSE yea I know, my buddy thehobbyist seemed to have missed the memo tho

@SPACEDESIGNWAREHOUSE 2 года назад

@@SerpentXTech hahah, Whoopsidaisey

@SerpentXTech 2 года назад

@@SPACEDESIGNWAREHOUSE gonna try and reach out to cloaks and some colleagues thanks for reply. Keep up the content

@confidingmadison 2 года назад

Did you have any issue with the shrouds melting or demolding so to speak? Getting too hot

@SPACEDESIGNWAREHOUSE 2 года назад

Ive only had this running for two days now, but no.. And according to the manufacturer - this plastic can handle more than twice the heat produced by a bitcoin miner.

@jfruits1 2 года назад

@@SPACEDESIGNWAREHOUSE This is correct, the shrouds are made from ABS plastic. The glass transition temperature (the point in which the plastic starts to get pliable) is 220° f (110°c). This is nowhere near the temps that will come out of the ASIC.

@yvonnadeau2331 2 года назад

It's a different pitch, better pitch not bad at all

@lsdave 2 года назад

If you touch the buss bars, you shouldn't get even the slightest shock. unless you are SUPER sweaty. They are only 15 volts DC, basically a car battery of voltage and current.

@SPACEDESIGNWAREHOUSE 2 года назад

I believe you - and theyre actually only 14 volts unless youre overclocking! Alas I will not be testing your theory, even though I touch car wiring all the time.

@lsdave 2 года назад

@@SPACEDESIGNWAREHOUSE what are you doing gettin your mitts in Car wiring? I used to be a 12v installer back in the day.

@SPACEDESIGNWAREHOUSE 2 года назад

@@lsdave I like adding pointless things in my truck that I barely make use of... an inverter to charge maybe a laptop.. A winch on the truck to pull people out of ditches the one time a year I go into a snowy place.. Bigger better sound systems even though I basically only listen to podcasts..

@coreymoyers Год назад

Wouldn’t sucking the air out make more sense?

@lberhold Год назад

Couldn’t you just place a fan on the exhaust as well to create a negative pressure and increase the airflow?

@Joshualt43 Год назад

Add another inline duct fan on the end of the exhaust duct to get a better pull in the system. That’s how we set up our Lincoln Electric weld fume extractor system at my work. The arm itself has a massive fan but it has to go through almost 70” of duct. I believe it is all 8”

@alexs1540 2 года назад

I'm very interested in the cases or funnels for air filtration purposes as well. Surely we need to keep dust and excessive humidity away from the asic miner's components in order to help insure ROI right?

@SPACEDESIGNWAREHOUSE 2 года назад

Yes, its important to keep a buildup of dust off the chips..

@safecryptodealcom2682 2 года назад

simple guarantor site for remote transactions with the source code of the Ethereum smart contract.

@y2kunals 2 года назад

Any ideas or options you can think of for a Goldshell KD Max? My whole house is vibrating and I have this thing in the basement! Family made me keep it off during the day now and only turn on at night lol NEED HELP!

@SPACEDESIGNWAREHOUSE 2 года назад

If you can take a measurement of the arrangement of the intake fans I can tell you if this will fit or pass you off to cryptocloaks (google them for the website) and maybe they can make you a shroud!

@trumanmay02 4 месяца назад

Can I use this set up for bitmain e9 pro ?

@Swimnbud Год назад

There are other duct adapters that include flow through for the power supply. Do you think that would be valuable?

@SPACEDESIGNWAREHOUSE Год назад

Yep, those make it even quieter because you can disconnect the little fans that cool the power supply.

@minarahimi9032 2 года назад

I am mining in Utopia ecosystem, I don't see the point in buying asics and making a loss

@dewsplash 2 года назад

Video is a day old and it's already unavailable on Amazon. Anyone else know of another source? Can't find the product on the fruits website.

@SPACEDESIGNWAREHOUSE 2 года назад

Its still showing as avaialable to me.. www.amazon.com/Crypto-Miner-Silencer-Cooling-S19pro/dp/B0B2SB3ZNH/ref=sr_1_7_sspa?crid=F5C5E88TAZXU&keywords=crypto+silencer&qid=1654549023&sprefix=crypto+silencer%2Caps%2C64&sr=8-7-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExVDZNT0kzUk1GRzhOJmVuY3J5cHRlZElkPUExMDA2MjQzREJQOEI5V1E3VU5ZJmVuY3J5cHRlZEFkSWQ9QTA3OTUzNTEyWFlLT1dHNjVTWEtPJndpZGdldE5hbWU9c3BfbXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

@SPACEDESIGNWAREHOUSE 2 года назад

@dewsplash Theyve also got them listed on ebay www.ebay.com/itm/234540852979?hash=item369bb966f3:g:bJkAAOSwuHtiXFAk&amdata=enc%3AAQAHAAAA4OdRFD0HNZQBmP0pDb0rrsZDJ%2Ftgfegeu8e39UbpHwN0IINf%2B9Q3J8Bw89Kr5a%2BFq40lYfNfaXdtPAN0HHR%2BuUoZ52A%2FCJ4HwqXLV0dWcaYf73jKVTGCN1CEHWrfrhtVeC%2BJQzl0t9raV1tPO9m7cpsztpPBbsozvSz2eiOIy3avaQRABJELqywn4HYCP72zF%2FcrF%2BcekVkXDWxxkoJ1kxurIR9CTs4zEIqo0LktxDVtEF%2Fo5lEN7pkZNEwCH7Lma%2FQl0tyFgnKz0OISpg4QZmS4A5YYbZ6WrMdOxweeqR%2BU%7Ctkp%3ABFBMws3mrKdg

@ManiacNewf Год назад

I can’t find one of these shrouds.

@ddk4664 2 года назад

This is the one !!! Great vid. Does it take 240volt or usa 110? Cheap Chinese thing hahha Chinese miner

@SPACEDESIGNWAREHOUSE 2 года назад

Its.. well I dont mean to correct you, but 120v. And Ive heard from a number of people who say theyve had this same fan running for over a year straight! Thats great news.l

@djpmatchbox Год назад

you could heat your house with a setup like this

@mrjonesyyy 2 года назад

Lol why would they make a 6" shroud at the exhaust. I would think you'd want it the same size or bigger. smh.

@SPACEDESIGNWAREHOUSE 2 года назад

Agreed! I have switched to 8” on both sides. That was an odd engineering choice

@RandomPlayer717 10 месяцев назад

Do these fan spoofers work with the s21 200th? If not do you know which does ?(also I just want the spoofers , not the rest )

@SPACEDESIGNWAREHOUSE 10 месяцев назад

No one has had a chance to get their hands on the S21 yet. But all indications point towards a similar enough design that these would work. We’ll have to wait to see!

@teofloros Год назад

I cannot order anything from either the fruits site or the amazon page. Did they stop production???

@SPACEDESIGNWAREHOUSE Год назад

Are you in the United States? Apparently amazon wont ship them outside the US, but he has an EBAY listing also www.ebay.com/itm/234720014919?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=vnYO4uxBTmu&sssrc=2380676&ssuid=vnYO4uxBTmu&widget_ver=artemis&media=COPY

@larryroyovitz7829 Год назад

Can you run the infinity fan on the exhaust side, instead of the intake side and leave the intake fans in place? I want to route the 8" ducting from the exhaust (using the infinity fan) into my cold air return on my HVAC system. The intake, at least for now, can stay with the regular fans.

@SPACEDESIGNWAREHOUSE Год назад

Yep, you definitely can. These fans are designed as HVAC fans so they should be ok with the heat! You wouldn’t NEED to leave the stock ones on, they pull extra power and make extra noise and the AC Infinity is strong enough without them.

@larryroyovitz7829 Год назад

@@SPACEDESIGNWAREHOUSE Awesome!

@princegumede3010 Год назад

Ow wait why don't you run aircon brezz with that fan

@NicoleZhang-nz1qh Год назад

🤝

@isaiahclemons1860 Год назад

Have you seen the Loki board for the X19 line up? Curious about your thoughts on it

@SPACEDESIGNWAREHOUSE Год назад

Imagine the timing; I just received one in the mail yesterday and I’m going to start messing with it this week

@isaiahclemons1860 Год назад

I actually meant the Njord board but also the Loki board

@deathbubblez4747 2 года назад

👏👏👏

@stanlybarns7720 2 года назад

If you run the fan as a suction fan it will suck air into the control board instead of blowing hot threw it.

@SPACEDESIGNWAREHOUSE 2 года назад

That’s true, but it’ll also suck incredibly hot air through the fan, and that’s got to lower its life span, don’t you think?

@stanlybarns7720 2 года назад

@@SPACEDESIGNWAREHOUSE its something to try and test. The fan needs to be durable and good quality. All automotive electric fans pull air through hot radiators. At around 200° Electric fans can take an absolute beating if built right. I'm a poultry farmer so we always cool our birds by sucking air out of the house and control the cold air with cool cells on the incoming side. That's where I get my theory of cooling and apply it to asic miners. Of course my fans at much bigger and non direct drive, but running so much heat on the control board can't be good for the long run of the miner.

@SPACEDESIGNWAREHOUSE 2 года назад

@@stanlybarns7720 You make a good point about the automotive fans.

@joelively5540 2 года назад

@@SPACEDESIGNWAREHOUSE Also, what's better to replace, a $120 dollar fan, or a $3,000 ASIC?

@SPACEDESIGNWAREHOUSE 2 года назад

@@joelively5540 well, to be fair it’s fan or control board, but the same sentiment; those cost more than fans and take longer to get.

@southernmantiskungfu 2 года назад

Anyone able to get recent stock for the fruits 3d printed shrouds ? Trying to source for the UK

@Valleytainment Год назад

could i use the stock fans and the infinite fan together?

@alanlees6779 Год назад

i saw to put 3 spoofers on there, so just 3 needed? not 4?

@SPACEDESIGNWAREHOUSE Год назад

No, you definitely need four

@gunnkeith1 Год назад

Link to buy 'spoofers'?

@JeviAndradi 5 месяцев назад

Can i get quotation for S21 sir

@JoshuaAlexanderPfeil 2 года назад

It may be better on the other side pulling air through the unit? Edit: One benefit is the unit will get no heat from the duct fan.

@SPACEDESIGNWAREHOUSE 2 года назад

True, but forcing super hot air through the duct fan 24 hours day would HAVE to shorten its life, I would think.. Could be wrong about that.

@JoshuaAlexanderPfeil 2 года назад

@@SPACEDESIGNWAREHOUSE How hot is the air? I told my wife I want to throw two Asics in In the basement to eat the house this winter, in Vermont, she asked me how hot it gets, I didn't know exactly and said 130° f

@SPACEDESIGNWAREHOUSE 2 года назад

@@JoshuaAlexanderPfeil Actually, shoot.. I don't know the exact temperature of the air coming out.. Ill measure that today! I think youre in the right area though with 130f

@bytegab864 2 года назад

Hi, no luck finding Fruit and Associates for the shrouds. Any alternate link or equivalent options? Thank you

@SPACEDESIGNWAREHOUSE 2 года назад

Yes - cryptocloaks makes shrouds as well.. Just MAKE SURE youre not using the original screws, you'll have to source some shorter screws so you dont hit the hash boards www.cryptocloaks.com/product-category/mining/

@bytegab864 2 года назад

@@SPACEDESIGNWAREHOUSE Great advice on the screws and looks like I will need the fan similators too. I plan to remove all factory fans and use the cloudline 8" fan as you have in your video. I don't need to duct the exhaust side and looks like it should be ok to just leave it off per your vid... thanks!

@Powerslide15 8 месяцев назад

Has anyone tried this in a pull configuration? Unfortunately I'd be running this in a very awkward space (my room), where it would make more sense (space wise) to put the fan in a sound dampening box after my s19k pro, then running exhaust out my window.

@SPACEDESIGNWAREHOUSE 8 месяцев назад

Yes some people do pull instead of push and it works equally. My only concern with that is that you are then subjecting the fan to all that heat constantly. Which is fine, it’s made for hvac so it can handle it. But heat will always shorten a bearings life.

@Powerslide15 8 месяцев назад

@@SPACEDESIGNWAREHOUSE Luckily I found a box big enough to host both fan and asic, but small enough to fit in the space I need it to. So I will use it in a push configuration. Goes to show what a little extra research can do for you.

@yuongn 2 года назад

After doing this... Both my S19 pro only reading 2 hash boards instead of 3. Any idea as to why or know if a fix?

@SPACEDESIGNWAREHOUSE 2 года назад

Did you use the short screws that came with the fruits and associates kit?? If you used longer screws, you may have made contact with the heat sync on the hash board. I didn’t realize people were doing this and didn’t think to mention it in the video.

@yuongn 2 года назад

Hmm, the long screw did make contact with the hash board. It touched the heat sink side... Boards salvageable?

@bizzyguju 2 года назад

Great video! I noticed you compared the temps and Terahas to immersion cooling. Would you use this similar setup individually for a 100 mine setup? Or is that a waste? I’m not concerned about the noise level but the lower temps and over locking is very intriguing if it can be scaled. Thanks.

@SPACEDESIGNWAREHOUSE 2 года назад

Well, you'd have to weigh the cost of buying 100 of these fans, and 100 of these shrouds, but yeah - other commenters are saying the AC Infinity fan is not crap and DOES last a long time - so if you dont care about the noise, I see a benefit in just hooking up the fan and shroud on the intake and leaving the back side totally open.. You'll get cooler temps, you'll get SLIGHTLY lower power draw - and you'll be able to overclock in the air.

@bizzyguju 2 года назад

@@SPACEDESIGNWAREHOUSEdo you know if they sell the input shroud by itself? If you have 100 of these machines, where would you point the input shroud/pipe to?

@Mnguyen92 2 года назад

How is your microvision stockd doing

@SPACEDESIGNWAREHOUSE 2 года назад

It’s been creeping up the last couple weeks against the general trend of the market with murmurs of development reaching its final form. A three day weekend is usually good for some surprise movement when we open back up so I guess we’ll see in about an hour.

@uddemannen 2 года назад

3d print a new top with room for a small exhaust fan

@SPACEDESIGNWAREHOUSE 2 года назад

What an interesting idea! I havent bought a 3D printer for like 6 years - it might be time for an upgrade

@ArchivingClownWorld 2 года назад

👏 👏 👏

@TravisHeadleyMD Год назад

Do you know if they make an adapter to connect to the intake on a shushminer? I currently have it in my garage which is fine since it is cold outside. Once summer rolls around here in Louisiana, I would imagine I will need a way to input cool air.

@SPACEDESIGNWAREHOUSE Год назад

Actually that’s a great project for my 3d printer. I’m going to be setting it up in about a week and thinking up good reasons to use it

@TravisHeadleyMD Год назад

@@SPACEDESIGNWAREHOUSE let me know how it works out. I definitely would be interested in something like that once Spring/Summer roll around.

@TravisHeadleyMD Год назад

@@SPACEDESIGNWAREHOUSE have you gotten a chance to try this?

@NicholasJamesJohnson Год назад

@@TravisHeadleyMD Not yet, unfortunately.. I dont know where all of my free time goes! Im heading to CES this week - so that settles that for time, but then I have most of the month of January for tinkering and I will get that figured out!

@DaleWilliams.153 Год назад

Looks like the Printed Shrouds from Fruits and Associates are out. Any other thoughts or resources?

@SPACEDESIGNWAREHOUSE Год назад

He’s got them on eBay as well www.ebay.com/itm/234767756034?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=vnYO4uxBTmu&sssrc=2349624&ssuid=3xayrFBARw6&var=&widget_ver=artemis&media=COPY

@DaleWilliams.153 Год назад

Thank you.