Safariland 6354DO ALS Holster | The Ultimate Holster 

Joe_K 🤣 true, i rotate.

just wondering but what makes the APLC a crappy light?

@@jusplayin2 most people don't like the idea of a plastic body on their light...

jusplayin2 they stop working almost immediately. They cannot handle the recoil of a firearm. They are cheap in every imaginable way. First hand experience.

@@jusplayin2 mine kept draining the batteries constantly

James Leinauer lol hope it works out. if not a lil dremel doesnt hurt

Did u find a holster that will work ?

Yeah this holster works with a 19X. I have one for mine. You just may have to loosen it up and take out the light cap on the bottom to get it to work with certain lights. It worked with my 19X with surefire X300U.

Forgot to reply to you Matthew Miller. Also, if you order from safariland their website says it ships in 2 days, but it's not true, all hosters are made to order, so they ship in about 2 weeks. I had a major headache dealing with them, because I thought they weren't going to ship my order.

Same here customer service is garbage

It doesn’t fit with my Sro on my OR P10c, but I will check tomorrow if it fits. Hopefully I remember to respond, but yeah.

@@MikadoSih did it?

WhiskyTangoFoxtrot33 thanks!

ah yeah, but i think they sell different mounts. i have the high ubl mount, there is a lower riding ubl mount, then theres the high drop leg mount and the regular 90's drop leg mount.

I'd go to holsterops.com

J.G. Hyde 6360RDS might work (from what I have read)

Tim Cook I’ll look into that! Thanks for the heads up!

J.G. Hyde let me know if it works. Been wanting to pull trigger on one but afraid to spend money if it doesn’t work since I already have a passive holster that works

@@UK2KTim what about the CZ P09. My buddy has the P10c and they look like their the same size darn near.

キングQue go with the MOS model for whatever gun your trying to buy a holster for.

@キングQue I have the MR918 as well with the Holosun 507. I want this holster and add a TLR7. Did you ever find out if it would work?

Edward Zimmermann this holster only works with doctor rds for some reason, I got the 6390DO which is a more innovated version of the 6354RDS. If you go down the path of the 6354RDS, you’d have to make some adjustments for it to fit your current RDS. On the other hand the 6390DO will fit any RDS. It has a cover on it but you can easily remove it once you get it. If you have instagram go to RDRgear’s page if you aren’t already following them and watch a video they made explaining this issue. Video is labeled 6354RDS vs 6390DO.

@@Q..M I'll check that out. Are you still using the TLR7?

Edward Zimmermann Shit sorry, get a 6390RDS not a DO. The DO only fits the doctor sights. I got it mixed up. I switched to a X300U from SF. I put my TLR7 on another pistol. A good tip for is if you get a 6390RDS with the option of a X300U. It’ll technically fit any lights because the width of a TLR7 is smalled than a X300U. So I use a 6390RDS for both pistols. They both fit perfectly even though they have different lights and obviously they are both glocks so don’t confuse it with two different types of pistols.

Gamble9110 correct

Did you ever find out if this holster fit your Afterburner by any chance? I also have one and am looking to get one. So if you could help it be much appreciated

Did it work? I’m debating going 23 in this holster.

Whitaker Behrens in this vid im using factory m&p threaded barrel

Yes

ap1986 good to hear!

hmm, did you try adjusting the tightness of the holster with that little nipple thing?

@@PewLifeI did, so i solved it, TLR-1 flash lights don't fit but there are knock off X300 cheap brands of eBay that fit perfectly! I freaking love the holster!

Samuel Coronel awesome to hear sorry bout the late reply

Knox Sickmon id say get a 34

No, it grabs on the ejection port

🤣🤣🤣🤣🤣

I would like to know the same thing... Please let is know. Thanks.

Any one ever get an answer on this?

JAYTEE Tomer the answer is yes

Oczywiście że tak

Without a light it still locks the pistol in the holster, but there is more wiggle room than I'm comfortable with. The optic doesn't a make difference what so ever

Flammin1000 yeah not sure about the gen 5’s. i have the newer holster that has the rmr hood cover that flips over and that fits my comped 19x

Pew Life Gotcha, thanks for the feed back

Steven Richardson Just in case you haven’t had an answer yet; that should all work without modification, except for the light. I had to use a hair dryer on my 6354 with the gun in it (with the TLR-1 HL on), and in less than ten minutes it was a perfect fit. Hope this helps!

James Leinauer yes

@@PewLife This video has been very helpful. Hoping the 6354DO will work with a 19X fitted with Surefire X300 and PMM comp.

Same question

the real question is why do you need a holster for the g34 to fit a comped g19 if you simply removed the bottom out of the holster to fit the comp??

Nun Ya should be no issue without comp. if you are just running 19x get it for the 19, if u are planning on running a 19,17,34 get the 34, tho 19’s will be a lil wobbly

@@PewLife outstanding man thanks sherpa told me the tlr8 wouldn't fit but that didn't make sense seeing the larger lights it worked with And its gonna be a single weapon hulster for work again thank you bud you the real captain here!

Nun Ya did your tlr-8 fit??

It should.

Highjak86 i like it. its got a nice finish thats been holding up pretty well over the last 3000ish rounds. I have not noticed any issues with accuracy but then again i have not used it for competition.

Already bought mine from Copquest

bandit3072 it does.

@@PewLife will it work on both M&P 2.0 with 5.0 inch barrel w/and without Light? I would assume yes but....

The Crusade it was a glock19 with a compensator that brought it to the length of a 34.

Pew Life so if I don’t have a comp. would a 19 fit in a 17 holster? Thanks a bunch man

WeRunGuns - WRG im trying. I need to upgrade my editing tho

The is the answer I'm also searching for...

Hopefully you found your answer, but it’s meant to fit the Glock 34, so it’ll fit any of the shorter models, even a Glock 22

yakitoriPB I have the 6378 which has the same ALS locking system and yes, it fits but is a little tight. With use it loosens up

@@AirsoftShizsAndGigs I was about to ask the same things lol thanks guys :D

Yeah the locking part goes on to the slide, and the frame is a little fatter but with time it'll get smoother!

I have 2 6354DO and I can not get it to fit with a TLR-1 on. the G34 I have a comp and an LAPG WL and I had to heat it up and stretch it out a lil bit but I also had to file down the inside in order for it to slide smooth... plugs had to be removed even tho I bought the plug kit it just did not work. my P80 17 reg does not fit and it's a bitch to get it out once pushed in.... again it needs to be modified to get it to work...

yes

@@PewLife much appreciated

Blake R absolutely. No threaded barrels tho

I’m waiting for this answer myself. Does anyone know?

JT Tomer very very very losely yes

Very much appreciated 👍

Prime Time I believe the TRL is too wide. From what I’ve read, every light that isn’t wider than the X300 will fit.

Yes but you might need a comp For it to fit properly since its sized for a glock 34/35

completely raw steel the inside is made out of 60 grit sandpaper

yes

Jack Lewis thanks picked it up at holsterops.com

Thanks my dude!

Jack Lewis gotcha

Check out Garand Thumbs Video on the CZ P10C. In that video he shows that the P10c fits in this same holster

Overwatch they r gun specific, i dont think a vp9 options exists

Grim Threeper 1776 it's for a 34/35. That's how it fits in the holster with comp same deimintons

@@ernestr1327 how does fit come into play regarding the comp if the bottom of the holster is gone?

Roderick Quiambao lol yup it was this guy!

Billy in 4C my question

Natwan Miller Yeha still waiting for a response from anyone lol

Billy in 4C just asked a guy on Instagram who was running drills with his 45 and a 6354do. He said the 17/22 6354DO works great bud

(for your Glock)

Elio tNess primary machine sir

Thanks man...Keep up the great content.

yeah very limited. Safariland caters mostly to duty weapons out, Glock, sig, s&w and xd's

GOAT thanks!

will do sir

I am gonna bight the bullet and order one for mine, I’ll let you know if it works. My other Safariland 578 fits my xdm and my smith so I’ll let you know when I get it.

Sorry it’s taken 2 weeks but my 6354DO should be delivered tomorrow and I’ll let ya know if it fits and what model I ordered if it does.

@@jedmook4460 i really appreciate it man. ur awsome

@@jedmook4460 did you get the holster?

Spartan 0341 thanks brother