Тёмный

Saildrive Diaphragm Replacement | ⛵ Sailing Britaly ⛵ [Boat Work] 

Sailing Britaly
Подписаться 40 тыс.
Просмотров 134 тыс.
50% 1

SUBSCRIBE ➜ bit.ly/SBRU-vid⛵ Informative Sailing Videos!
In this "Boat Work" video I replace the 26-year-old saildrive diaphragm seal on our boat. I disconnect the saildrive from the engine, move the engine forward, then remove the saildrive assembly from the boat. I then split the saildrive leg from the transmission and replace the diaphragm seal along with some associated gaskets and o-rings.
While I'm at it I replace the prop shaft seals and lower bearing housing o-rings on our Volvo Penta saildrive. I then reinstall all of the above ready for our launch, which went successfully: • We SPLASHED (and so di...
We saved $$$$ by doing this job ourselves & I share the mistakes I made during this job with you so that you can avoid making any of them! :-)
Whilst doing this job (on my own) Rossella, Emma (6 months old at the time) and I were living on board, up on top of a cradle, in a gravel car park, hundreds of miles away from our family. At the same time as filming this video, we were filming all the other jobs we were doing on the boat during our DIY refit (including filming separate sections of video about this job) AND editing AND uploading DAILY videos to our RU-vid Channel. We were sleep-deprived, and although we must have been crazy to take on all of the above, we are very proud that we were able to achieve everything that we did in that period.
If this video helps you in any way then show us some love by joining our Patreon Crew. You get exclusive benefits (like seeing our videos before anyone else, getting our CREW or PRODUCER baseball caps sent to you anywhere in the world, or even have Rossella and I contact you by email or videocall to help you in any way we can, whether that be buying a boat, helping you troubleshoot technical problems problems on your boat, or giving you any other kind of advice you would like!) Find out more here: / sailingbritaly
Please Note In this description I (Chris) am using the singular, but, for the record, I could not have done any of this work if it wasn't for Rossella doing a wonderful job with all of the things she was doing during this crazy period. We do everything as a team and Rossella's hard behind-the-scenes work is absolutely essential in allowing me to make videos like this, so here's a big thank you to Rossella!
Useful links, including free PDF downloads on how to do this job can be found here: / 23183271 (This is a free post publicly accessible to anyone)
⛵ Sailing Britaly ⛵ brings you the sailing shenanigans of Chris (British), Rossella (Italian), and baby Emma (Britalian) as we sail our 1992 Bavaria 350. We make sailing vlogs of our cruising adventures and share any tips and tricks we can along the way. After all, sailors are one big family!
More Sailing Britaly here:
Instagram: / sailingbritaly
Twitter: / sailingbritaly
Facebook: / sailingbritaly
Fair winds! 👍
Chris, Rossella and Emma
--------------------
Music:
1:09:50 Lonely Troutman, William Rosati (RU-vid Audio Library)
--------------------
'Sailing Britaly' is a Helvellyn Ltd brand. Disclaimer: Due to factors beyond the control of Helvellyn Ltd, we cannot guarantee against unauthorized modifications of this information, or improper use of this information. Helvellyn Ltd assumes no liability for property damage, injury or death incurred as a result of any of the information contained in this video. Helvellyn Ltd. recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, open flames, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Helvellyn Ltd, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Helvellyn Ltd. Disclosure: any links in this description may be affiliate links. If you decide to buy some items from them, Helvellyn Ltd may receive a small percentage compensation for having suggested the suppliers to you. (This costs you nothing) As an Amazon Associate we receive compensation for qualifying purchases. Helvellyn Ltd only recommends suppliers and products which we believe in, so there is never any conflict of interest.
Gear used to make this video:
Big Camera ⯈ amzn.to/2Pvbk6c
18-55mm Lens ⯈ amzn.to/2NRgPer
15-45mm Lens ⯈ amzn.to/2CmsRed
Microphone ⯈ amzn.to/2nZDPwk
Waterproof & Shockproof Hard Drive ⯈ amzn.to/2o0BmSc
(Links support our channel)
#saildrive #refit #boatmaintenance

Хобби

Опубликовано:

 

4 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 346   
@SailingBritaly
@SailingBritaly 5 лет назад
Hello there you wonderful bunch of people! Here is a link to a FREE / PUBLIC post on Patreon, where you can download PDF documents about doing this job: www.patreon.com/posts/23183271 Thank you very much for watching, if you want us to keep making videos you can join our 🌟Patreon Crew🌟 for as little as $1 per month, to help us keep making videos. Otherwise, give this video a thumbs up and share it somewhere: on a forum, Facebook, Reddit, Twitter, email a mate, whatever you like - just share it! YOU can help us grow and give us the incentive to keep making videos. Thank you! Fair winds, Chris, Rossella & Emma 😊
@Kampup
@Kampup 5 лет назад
what size it your boat? lenght, beam, standing room? cheers
@SailingBritaly
@SailingBritaly 5 лет назад
@@Kampup Hi there, it's a Bavaria 350: sailboatdata.com/sailboat/bavaria-350 Cheers, Chris 👍
@umcosta
@umcosta 4 года назад
By far, one of the best hands-on-diy videos out there. Honest, detailed, no stock-media look-a-like. Thanks for the work and keep it up!
@SailingBritaly
@SailingBritaly 4 года назад
Thank you Marcos! Cheers, Chris 👍
@wings4078
@wings4078 2 года назад
Great vid !!thanks ! wish I was there to give you a hand……….no head banging music,no dropped cameras,thanks aguain !
@billiondollardan
@billiondollardan 5 лет назад
What a wonderful service you've done for do-it-yourselfers out there
@SailingBritaly
@SailingBritaly 5 лет назад
Hi Dan, we love helping people and we know how useful it would have been for us to see a video like this before we did this job! Fair winds, Chris, Rossella & Emma 😊
@damianmullin
@damianmullin 2 года назад
You're very calm I would be effing, beeing and ceeing throughout! Lol.
@nickjones9505
@nickjones9505 9 дней назад
Good on you Chris, many thanks for sharing your experience and efforts. You’ve done a lot of boat owners a great service. Well done !!
@SailingBritaly
@SailingBritaly 9 дней назад
My pleasure Nick, I'm very happy to help other boat owners. God bless and fair winds, Chris 👍
@SenatorPerry
@SenatorPerry 5 лет назад
I know my gratitude doesn't pay the bills, but I am really thankful for the work you and your family does to include us in your lives.
@SailingBritaly
@SailingBritaly 5 лет назад
Hi there, we love all our viewers, especially those who take the time to comment so supportively. We're sure that in time we will be able to grow our Patreon Crew to the point that makes our Channel financially sustainable, and any of our viewers who share our videos help us achieve this. If you would take the time to share this video then we would be immensely grateful. Fair winds! Chris, Rossella & Emma 🙂
@ivainmartinossi7529
@ivainmartinossi7529 Год назад
Done! Oh my, it was some work. Definitely not a one mad job for me, there was some heavy lifting involved... but a 2-man 3-days job. Your video was invaluably helpful and saved us so much trouble. Cheers!
@SailingBritaly
@SailingBritaly 5 месяцев назад
🙏👍
@kamilkutlay
@kamilkutlay 2 месяца назад
thank you very much for these and wish happy long years for little cute emma
@omvaren
@omvaren 3 года назад
excellent video, thank you! I am especially grateful for you not using stupid free music!
@SailingBritaly
@SailingBritaly 3 года назад
Glad it was helpful! 👍
@jackneff179
@jackneff179 5 лет назад
you give clear instructioins as to what you are doing in each job....the sign of a good military man...thanks for your service.
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Jeff. Chris 👍
@curtisdietz9434
@curtisdietz9434 4 года назад
Hello From Nova Scotia! I have a 110s that needs doing and have been putting off due to the daunting nature of it. This is just so invaluable, and gives my confidence to do this a huge boost. For all their detractors, my md7a with sail drive has never let us down and gives incredible fuel economy. I owe her some TLC. Many, many thanks.
@SailingBritaly
@SailingBritaly 4 года назад
Hi Curtis, and hello to beautiful Canada! (I adore Canada and imagine Nova Scotia must be a fantastic place to sail) I'm very glad to hear that this video will help you look after your saildrive. We love helping people so it's very satisfying to get comments like this. Cheers, Chris 👍
@seanryder7431
@seanryder7431 5 лет назад
Great work well done. Lovely to watch a REAL replacement instead of a bench type demonstration
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Sean 👍
@richardtruesdell8289
@richardtruesdell8289 5 лет назад
You are a loving dad and husband and I love to see you interact with your precious baby. You have a great family and look forward to more videos of your journey.
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Richard! Children are such a blessing and their natural joy and love for the world can teach us adults a lot about life... Welcome aboard and fair winds! Chris 😊
@ronkoenig4145
@ronkoenig4145 2 года назад
Very well presented and timely as I am going to inspect a 39 year old 27 foot boat for purchase which has a saildrive unit. I now have a few more things to look for and a few more questions to ask of the owner. While I most likely would not try a renovation, as you have done, I now can appreciate the work required if I have it done by a ship engineering company. Thanks again.
@mikeh9882
@mikeh9882 3 года назад
Hi great detail. You make this look simple, but in reality this is highly skilled, with some great improvisation. Thanks
@nearlynativenursery8638
@nearlynativenursery8638 3 года назад
Brilliant work and thanks for sharing your mechanical knowledge.
@bigglesone7673
@bigglesone7673 5 лет назад
I did my saildrive 7 years ago so our Bavaria 36 is due a change again this year. Like Chris I am a retired RAF aircraft engineer and well taught in the useful skills for this job (although my experience of aircraft is probably a couple of generations before Chris's!) But this video is a useful reminder of the sequence and pitfalls of the operation. The Bavaria does not have such good access as his boat but I was able to remove our engine completely which made life easier although it did involve disconnecting the engine entirely with the subsequent necessary reconnections and engine bleeding etc.
@SailingBritaly
@SailingBritaly 5 лет назад
Hi there, thank you for watching & commenting. I'm sure it will be a lot easier for you this next time round as you've already done the job once. I couldn't find any videos like this out there before I did ours, so I hope that this will be of value to other boat owners who like to do their own boat work. I personally believe that the trade training at Cosford (or Halton as I believe it was before) is amongst the best in the world. I have certainly never seen anything anywhere near as professional anywhere in the commercial world, despite working for a variety of oil & gas companies with vast budgets. Fair winds! Chris 👍
@billgiles3261
@billgiles3261 5 лет назад
Biggles One I was at Halton back in 1960 aged 15 on a 3-year apprenticeship. I worked on a whole host of aircraft, now all obsolete! I took up sailing in Gib where we lived next to the Sailing Club on the harbour (now filled in). As you say the RAF Training was second to none and set me up with long lasting skills which I am using sixty years on. Good luck with your project and hope that you and your young family have a great sailing adventure.
@flyingdutchman6984
@flyingdutchman6984 5 лет назад
Watching this makes me happy I don't have a saildrive. Great job keeping the video family friendly. I would have taken the opportunity to get some line cutters installed. Fair winds Chris & family.
@SailingBritaly
@SailingBritaly 5 лет назад
😂 We have a fishing line cutter installed - a.k.a. the 'poor man's line cutter'! Cheers, Chris, Ro & Emma 👍
@sam-bartlett
@sam-bartlett Год назад
Excellent video THANK YOU.
@SailingBritaly
@SailingBritaly Год назад
My pleasure Sam. God bless. :-)
@diegobiljan
@diegobiljan 3 года назад
Thanks for the exhaustive representation, I solved my problem with galvanic currents...top.-..
@Cheesemeister1977
@Cheesemeister1977 5 лет назад
You wait for ever for a Volvo penta sail drive replacement video then two come along at once. Thanks Chris for your take on the procedure. #spiffy
@SailingBritaly
@SailingBritaly 5 лет назад
😂 Cheers Matthew! 👍
@spelunkerd
@spelunkerd 5 лет назад
Another brilliant demonstration, thanks for those small details, and for including the locking wire oversight. When you considered applying heat to the aluminum housing to get the sea cock off, I remembered a few disasters I've had doing automotive repair through the years. Heat and aluminum don't go so well, I've stripped out aluminum threads frozen to steel bolts more than once.
@SailingBritaly
@SailingBritaly 5 лет назад
Hi there, that is a great compliment coming from you, thank you! I was being careful with the Aluminium as it is delicate. If things had gone wrong a helicoil could have been an option, but I had enough on my plate already whilst filming this, so fortunately that wasn't needed. :-) Comments on RU-vid are fantastic as it give the world a chance to peer review videos like this for the benefit of everyone, so thank you for taking the time to share your opinion. Cheers, Chris 👍
@sergiosallenave1635
@sergiosallenave1635 Год назад
Very good . I heve the same problem of refrigerations with this plug .
@davywatt9367
@davywatt9367 Год назад
Well put together video and very informative spot on repair
@SailingBritaly
@SailingBritaly 5 месяцев назад
Thank you! 🙏
@dougmrak784
@dougmrak784 3 года назад
absolutely great great video
@mikecress3297
@mikecress3297 5 лет назад
Learned a lot, and got my Emma fix. I'm good!
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Mike! 👍
@flynndex8844
@flynndex8844 3 года назад
Great video on the DIY saildrive diaphragm replacement...perfect level of detail and nice to see you and your family included.
@SailingBritaly
@SailingBritaly 3 года назад
Thank you! Chris 👍
@josipbrezac5824
@josipbrezac5824 3 года назад
nice description professional work- Bravo
@SailingBritaly
@SailingBritaly 3 года назад
Thank you :-)
@simergr
@simergr 4 года назад
Great job you've done and you should be proud of your self. Only one thing for next time when you put back steel bolts under sea level always deep them in marine grade grease first so next time they will come off easily and reduces galvanic corrosion too. I have worked with outboards for some time professionally and instructions are clear about using grease to every bolt except those that are on the engine like head bolts. Greetings from Greece and thank you.
@veleiropedepano5377
@veleiropedepano5377 Год назад
Good job! Very didatic and profissional Regards from Brazil
@SailingBritaly
@SailingBritaly 5 месяцев назад
🙏
@aleksanderkastelic2214
@aleksanderkastelic2214 3 года назад
Bravo very good knowledge...
@gimamotor
@gimamotor Год назад
Great job as you did it as first time, and great child!! Just to know... Volvo penta recall to put 15w40 oil in SD
@anton_wahrby
@anton_wahrby Год назад
Excellent video!
@SailingBritaly
@SailingBritaly Год назад
Than you Anton! Chris 👍
@patricklindahl868
@patricklindahl868 5 лет назад
Very nice work! I have been doing this a couple of times, when I was working in a small boat workshop in Gothenburg, Sweden. I saw some things that should be adressed sometimes in the future: 1) Control wires are brown = very old and often rusty inside the shield. They tend to break exactly in the middle of a maneuver. I would recommend new low friction wires. They are often black nowadays 2) When you have the shock absorbers loose, consider get a new pair. If they are 26 years old as well, the rubber often separates from the steel and then they do no good. 3) The fuel hose was reinforced plastic hose, that get extremely stiff by the diesel oil. It should be replaced by a oil resistent rubber hose, preferable of a type that don't generate static electricity. You have a very good engine, VP 2003, but unfortunately the spare parts are discontinued by Volvo Penta. So take good care of it, never overheat it and change the oil one time too often, it's never wrong to have clean oil, whatever the instruction manual or your boat neighbor says. At least once a year despite running time.
@SailingBritaly
@SailingBritaly 5 лет назад
Hi Patrick, thank you for watching and commenting with your intelligent observations. I was aware of the fuel hose before I bought the boat and at the time of filming this video I had already bought the replacement. A proper diesel-greade fuel hose has now been fitted (it's in one of our more recent videos). Thanks again for commenting, which helps any other viewers reading this, as well as us. Fair winds! Chris 👍 (plus Rossella & Emma 🙂)
@aljotock
@aljotock 5 лет назад
You are such an inspiration! Many thanks
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you! Don't forget to subscribe 😉 Chris 👍
@buzzbladz7142
@buzzbladz7142 4 года назад
Nice video. Job well done. Thanks
@SailingBritaly
@SailingBritaly 4 года назад
Cheers 👍
@cblandblueyonder
@cblandblueyonder 9 месяцев назад
Thank you very much for taking the time to do this. We are in the process of renewing the diaphragm on our Bavaria 35. I noticed that you seemed to have solid engine mounts with no rubber bushing - ours has the original, which are rubber, and presumably take some of the loadings. The rear hole, which you had to pack out, is still circular on ours, (despite a lot of use!), and I wondered if this might be related to the fact that the rubber mounts provides some give on ours, so there is less stress on that bolt hole.
@SailingBritaly
@SailingBritaly 5 месяцев назад
My pleasure! Our mounts do have rubber sections too, but my "stress test" was too much for the stbd one. The packing on the rear mount is still perfect. 🙏 Best regards, Chris 👍
@oboefliks
@oboefliks 2 года назад
Thank you for this excellent video, it helps me to understand my own engine and saildrive.
@diegomendez2008
@diegomendez2008 Год назад
Hello body, thanks you very much for this video, it is really awesome. I disassamble my saildrive years ago and really here you are describing very detailed all the things that you have to keep in mind when you want to do it, Again thank you very much.
@SailingBritaly
@SailingBritaly 5 месяцев назад
My pleasure Diego! 👍
@stuartmcmichael5250
@stuartmcmichael5250 5 лет назад
Thanks for sharing your experiences in the servicing and maintenance of your yacht. Having just found your video channel I’m catching up with your videos. Thank guys and as for Admiral Emma for supervising the work.🏴󠁧󠁢󠁳󠁣󠁴󠁿⛵️
@eriknordlund
@eriknordlund 3 года назад
Thank you!!! I am currently working up the courage to get into this job and I feel so much better after watching this excellent walk through. Again, thank you so much for making this video!
@SailingBritaly
@SailingBritaly 3 года назад
You're very welcome Erik. Good luck with the job! 👍
@pauleldridge9721
@pauleldridge9721 3 года назад
Excellent video.
@SailingBritaly
@SailingBritaly 3 года назад
Thank you Paul. :-)
@Etvi
@Etvi Год назад
Thank you for a very useful video. Only now I realized that it seemed as your prop anode was painted over with the antifoul. Hence, the anode was cut off from the water and the propeller got corroded. The kind of things that do not appear obvious until you learn by experience.
@Taureau13000
@Taureau13000 5 лет назад
Hello .. I'am French and i don't speak very well English , but i'have seing all this excellent vidéo. Thank's
@SailingBritaly
@SailingBritaly 5 лет назад
Hi there, that is very nice to hear, merci boucoup. We will be travelling through the French canals down to the Mediterranean and we are looking forward to seeing more of your beautiful country. Fair winds, Chris 👍
@Taureau13000
@Taureau13000 5 лет назад
Your French is better than my English. I'am from Méditerranée and my boat is in Marseille. Happy to see you in my country. @@SailingBritaly
@SailingBritaly
@SailingBritaly 5 лет назад
My French is definitely not better than your English! :-) I look forward to learning some French during our trip through the canals. We are planning to enter the Med around Marseille so we will be pretty close at some point in the future... 🙂
@gunnarhaldorsen4185
@gunnarhaldorsen4185 5 лет назад
Fantastic video! Thanks from Norway!
@SailingBritaly
@SailingBritaly 5 лет назад
Gunnar Haldorsen Cheers Gunnar! 👍
@sxmNice
@sxmNice 4 года назад
Very interesting, thanks. BTW, I changed this seal on a friend's boat. We used the main sheet hoist to lift the engine (thru the companionway). I think its an interesting alternative to the use of wedges.
@SailingBritaly
@SailingBritaly 4 года назад
Hi Georges, that was my first choice too but the geometry was wrong on our boat and the engine would have come too far forwards (without taking the woodwork apart). This was easy enough, it probably looks harder in the video than it was in real life. Cheers, Chris
@seanthomas3181
@seanthomas3181 4 года назад
Excellent video on a job I have to do.
@SailingBritaly
@SailingBritaly 4 года назад
I’m glad this was useful Sean, buon lavoro! Chris 👍
@brockallentaylor
@brockallentaylor 5 лет назад
Damn! That thing was a real pain! Thanks for sharing!
@SailingBritaly
@SailingBritaly 5 лет назад
Thanks for watching & commenting Brock 👍
@robertoeser
@robertoeser 2 года назад
Very helpful, thank you very much! My only access point is through the engine door, so I will have to pull out the engine completely.
@Bowman339
@Bowman339 5 месяцев назад
A method to get the sail drive lined up to the housing is really long bolts. Then swap them out for the correct bolts as you line it up.
@shaneharvey1026
@shaneharvey1026 3 года назад
One of the best, that is to say thorough, clear and well explained, "how to" sailboat maintenance videos I've seen. Well done and thank you. Happy sails!
@lutzweb
@lutzweb 3 года назад
26 years and it is in such a good shape1 THAT RELAX me a lot if I miss of some month the 7 year replacement schedule...
@andysutils
@andysutils 3 года назад
Good lord. I didn't even know what one of these were and I'm about to buy a fairly modern but small mid 90s boat in a few months time!
@SailingBritaly
@SailingBritaly 3 года назад
Glad to be of service! Good luck with your purchase and if you need a hand with any refit work we offer one-to-one assistance via video calls. Cheers, Chris
@alfred7350
@alfred7350 Год назад
Very good vid mate, can tell you have an engineers mind 👍
@SailingBritaly
@SailingBritaly 5 месяцев назад
🙏
@lewisoverdorp8405
@lewisoverdorp8405 5 лет назад
the dozen who dislike you are idiots. You are doing us all a great service and your videos are extremely detailed. Like any aviation mechanic you are meticulous and yet as practical as a sailor. My 84 year old neighbor asked me for help replacing his bad sail drive which I have never done before and after watching your video I was able to take it off confidently in four hours. Of coarse putting the new one on will be a different story........ Keep up the good work, cheers! Captain Lewis Overdorp
@SailingBritaly
@SailingBritaly 5 лет назад
Hi Lewis, thank you very much. Getting everything back together should be easy if you spend the time to line everything up and support/tie the saildrive in place so it can't move. Good luck! Chris
@jond4532
@jond4532 3 года назад
Great video 👏. I love your practical approach finding random tools that do the task, and thorough attention to detail .
@SailingBritaly
@SailingBritaly 3 года назад
Thank you Jon, Chris
@johnperry7534
@johnperry7534 5 лет назад
Great Work mate Very practical good engineering mate! That thing will last forever because you've done a great job. I've had a boatyard do the same job and leaked straight away and they said it's fine and normal to leak (until the oysters grow and stop the leak that is) So you have aced it really good work .
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you John! 👍
@russell1048
@russell1048 Год назад
Excellent video appreciate
@SailingBritaly
@SailingBritaly 5 месяцев назад
🙏👍
@TERRIBLYBRITISH
@TERRIBLYBRITISH 5 лет назад
This was another great video from you Chris. It's one thing doing all the work it's another thing editing it all. Well done.
@SailingBritaly
@SailingBritaly 5 лет назад
The editing on this was a killer. Once I had finished this monster I had about 10 or 15 failed exporting attempts and in the end I had to reduce the quality to 720p to get the video file without glitches. So many hours... I hope this helps people! Fair winds, Chris 👍
@stefanoalioto8160
@stefanoalioto8160 5 лет назад
Complimenti....sei un temerario per fare questo lavoro tutto da solo!
@SailingBritaly
@SailingBritaly 5 лет назад
Grazie Stefano, farlo e una cosa: registrarlo e un altro!... Sono aperto alle opinioni di tutto il mondo. Ci vuole piu' corraggio a metterti in piazza cosi, che a fare il lavoro. :-) Grazie, Chris 👍
@stefanoalioto8160
@stefanoalioto8160 5 лет назад
@@SailingBritaly Riflettevo che avresti potuto usare la drizza di randa per aiutarti a tenere il blocco motore in linea ed evitarti di fare tutta la fatica con i pali di legno per rimettere il motore in linea.
@SailingBritaly
@SailingBritaly 5 лет назад
L'ho pensato anch'io, ma in realta' non era possibile perche la cima sarebbe arrivato da 1 metro in avanti dal centro di gravita' del motore. Invece di sollevarlo, lo avrebbe tirato verso la prua...
@johninerie9251
@johninerie9251 5 лет назад
Excellent job - I, like you, prefer to do things myself - I think it is unlikely that another person doing this in a shop would have spent as must time and care making sure everything was throughly cleaned before reinstalling. Yep it will take you twice if not three times as long doing it yourself but it’s worth it - and these videos are an immense help for the next DIY’er to know what they are getting into before starting a job and the shop manual never has all the information you need when the parts aren’t new and pristine. Keep up the good work!
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you John! 🙂
@marktheurer00
@marktheurer00 2 года назад
Just found your channel and immediately subscribed. Top notch work mate! Very well documented and organized. You will be both an inspiration and a HUGE help to me - a first time boat owner (Lippincott 30 with OCM Zepher sail drive made in the USA). Best of luck.
@antonynr
@antonynr 5 лет назад
Hi - I changed mine last year - used a winch to drag the engine forward, rather than levering it. A tip for next time (which I expect you will have forgotten about in 7 years) Set up a Spanish windlass between the keel and the saildrive before you start and tension it - this will keep the drive level as you move the engine forward and save you from using levers on mating faces!
@SailingBritaly
@SailingBritaly 5 лет назад
Hi Anthony, the mating faces were intact as I was being gentle whilst levering. As always, doing this a second time round would take half the time (or in my case less than a quarter of the time as I won't be filming it again!) I used a trucker's hitch from the keel to the saildrive in the latter part of the video to achieve the same end and it worked a treat. It literally took about 10 minutes to get the engine and drive engaged with no help from anyone. If I was to do this job again I would use the same tachnique to maintain the position of the saildrive whilst moving the engine forward by hand (In the end I found I could just manhandle it around wherever I wanted it). Cheers, Chris
@randyowens2717
@randyowens2717 5 лет назад
I like your knowledge and techniques!
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Owen!
@thomasstieglitz5917
@thomasstieglitz5917 6 месяцев назад
Great vid thanks!
@SailingBritaly
@SailingBritaly 6 месяцев назад
Our pleasure! :-)
@PaulusPHM
@PaulusPHM 5 лет назад
Cool video, reminds me of my days in aviation training back in 1970's
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you :-)
@klotzbruno
@klotzbruno 5 лет назад
Großes Kino - Danke
@SailingBritaly
@SailingBritaly 5 лет назад
Dance schön! Chris 👍
@karlsitell
@karlsitell 4 года назад
Very impressive and informative. I did learn a lot! Thanks
@SailingBritaly
@SailingBritaly 4 года назад
Cheers Karl :-) 👍
@randyowens2717
@randyowens2717 5 лет назад
Great job! Love ya Emma!
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Randy! Emma is our little superstar :-)
@jeffbiesenberger749
@jeffbiesenberger749 4 года назад
Great video and thank you for posting. While you are at it may I advise you change your brass screens in your air intake silencer on your Volvo. Over 20 years ours fatigued and then got sucked into the #1 cylinder requiring us to remove the head. We replaced with a K&N air filter with foam interior to avoid headache again.
@SailingBritaly
@SailingBritaly 4 года назад
You’re very welcome. Thank you for your advice regarding the air intake silencer - we can all learn from each other. Chris 👍
@kriiigern777
@kriiigern777 5 лет назад
Nice video. I love to learn about boats. So thank you for being my teacher :D Sorry you had to run into the issues with the sail-drive (the prop and all).... But you pulled it off literary.. Well done!
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Bjørn! If you know anyone else who might appreciate this then please share our channel with them ru-vid.com Cheers, Chris 👍
@roanjovitaro9013
@roanjovitaro9013 7 месяцев назад
Fantastisk god video tak jeg har selv en bandholm 27 dansk sejlbåd med samme system
@SailingBritaly
@SailingBritaly 5 месяцев назад
My pleasure mate, fair winds! Chris 👍
@dapman2007
@dapman2007 5 лет назад
Chris, Just like to add my gratitude to the rest. A very real demonstration of work on a boat in a confined space. I'm about to embark on this task and there is a lot of very useful stuff here. Thank you
@simonhall5175
@simonhall5175 4 года назад
Thank you for all your detailed step by step information, I'm replacing mine next month and your video is an absolute gold mine of information 👍. I'm truly thankful for your time and hard work in recording this. SV Trigger Happy
@ΔιονυσιοςΛαγογιαννης
Please Simon give me the adress of the store you will buy the elastic diaphragm, o rings ,etc. Here in Greece they do no stock old parts. My Rassy 26 haw a saildrive too, and children feel ready to be sailors...
@simonhall5175
@simonhall5175 4 года назад
@@ΔιονυσιοςΛαγογιαννης Mechanical Services - Volvo Penta Osprey Quay 19 Mereside Portland DT5 1PY
@SailingBritaly
@SailingBritaly 4 года назад
My pleasure Simon, good luck with the job and if you would like a hand with anything I offer one-to-one video call assistance. Cheers, Chris 👍
@darrelwalters
@darrelwalters 5 лет назад
Well informed video - well done and thank you for producing it .
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Darrel 👍
@lawrencechueh8089
@lawrencechueh8089 7 дней назад
Thanks!
@SailingBritaly
@SailingBritaly 7 дней назад
Thank you very much Lawrence! Very best regards, Chris, Rossella & Emma 🙂
@waynejenkins3607
@waynejenkins3607 4 года назад
A very handy thing is a small inverter stick welder and 2mm 316l welding rods. The stainless rods will weld, mild, stainless and cast iron, great for repairs and fabrication on the run. Your welcome, ;)
@SailingBritaly
@SailingBritaly 4 года назад
Agreed re the SS welding rods, you can even get by without a welder at a pinch: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qk8r8rorC1Y.html
@moonshine3333
@moonshine3333 5 лет назад
I really am no engineer but remember helping my Dad put a gearbox back into a car and had a real problem getting the gearbox spline to mate into the flywheel. If that makes sense did you get lucky because if the shaft didn’t align I’m not sure what you’d do. Turn the engine over by hand? You really are very talented 👍
@SailingBritaly
@SailingBritaly 5 лет назад
Hi there, the main problem with this (as was seen on removal where it took a while to split the saildrive and engine) is keeping the saidrive and engine aligned - the saildrive can move around quite a lot and if it's not supported then it tends to drop down at the fwd end, this small angle of misalignment then makes it difficult for the splines to disengage (or engage on the way back in). When I was mating up the two the saildrive was held steady and at the correct height by the lines and support outside the boat, so as I lifted the engine and moved it backwards the splines were aligned. There is very little rotational resistance in the transmission and I believe the splined saildrive input shaft could be rotated by hand if necessary, however I believe that anyone who has trouble getting the engine and saildrive to mate is far more likely to be dealing with angular misalignment as outlined above, rather than rotational misalignment of the splines. Thank you! Chris 👍
@JohnJones-oq6ty
@JohnJones-oq6ty 4 года назад
Hey there, thanks for this video and the pro tip on tying the saildrive to the keel... I just did a saildrive replacement and it was super valuable in helping me get the spline shaft of the drive aligned with the engine.
@SailingBritaly
@SailingBritaly 4 года назад
Hi John, I'm glad I could be of assistance and that the job went well for you. Cheers, Chris
@davestrong6472
@davestrong6472 5 лет назад
Nice job, your RAF training paid off. I think I would have packed silicone grease between the two seals. Dave
@SailingBritaly
@SailingBritaly 5 лет назад
Thanks Dave! The fitting instructions are pretty adamant about leaving the diaphragm seal dry under the clamping ring. It's dry so I'm very happy. 👍
@davestrong6472
@davestrong6472 5 лет назад
I wasn’t clear, I meant to say place silicon grease between the two seals on the propeller shaft. This will help lube the seal on the water side. Love your channel and supper cute baby. Dave
@WilkoVehreke
@WilkoVehreke Год назад
Impressive!
@SailingBritaly
@SailingBritaly 5 месяцев назад
🙏
@mmanut
@mmanut 5 лет назад
Excellent How To Video. U have such A very Happy Baby & A Beautiful Wife‼️👍👍⛵️. Vi
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you very much. I am a very lucky man and I count my blessings every day! Cheers, Chris 👍
@Kimdino1
@Kimdino1 5 лет назад
I wish I had seen this in February, just before I changed mine. It would have been a great help, especially as I didn't know what I as going to come across & needed to have everything to hand before I started. This would have been a very helpful video. Hope you had a good year on the water.
@SailingBritaly
@SailingBritaly 5 лет назад
Shame you missed this but I’m glad you got yours done. It would definitely be a lot easier the second time round as, like any job, you learn best by doing. Fair winds mate, Chris 👍
@jjrevelry7913
@jjrevelry7913 5 лет назад
Hi Watching your removal of the Saildrive made me recall the old, super helpful, Haynes Manual 'instruction' - refitting is the reverse of removal! ;-)
@SailingBritaly
@SailingBritaly 5 лет назад
Love those Haynes Manuals... 🙂👍
@l1ttleedd1e
@l1ttleedd1e 4 года назад
This is a really great video, you have a very engaging way of explaining how to do things. My sail drive seal is due to be replaced this year and we will certainly your video. Thank you so much. Fair winds to Family Britaly!
@SailingBritaly
@SailingBritaly 4 года назад
Hi Dianne, thank you very much. If you need a hand with anything I offer technical assistance by videocall. If you get stuck with something I can help you resolve it in just a few minutes: sailingbritaly.com/videocalls Cheers, Chris (plus Rossella & Emma) ⛵️👍
@geabyrne
@geabyrne 5 лет назад
Thanks Chris! The seal is only to control the amount of water so!
@SailingBritaly
@SailingBritaly 5 лет назад
👍
@dougmrak784
@dougmrak784 3 года назад
ok great video
@akkemik
@akkemik 4 года назад
Oh man you are awesome and i tired when i was watching. Now i'm start to think how can i do with mine! well done! You got me and will check all your vlogs. best
@SailingBritaly
@SailingBritaly 4 года назад
Welcome aboard Murat 😊
@alainbourjolly8245
@alainbourjolly8245 4 года назад
merci pour cette video instructive; on se sent un peu plus preparé a changer le joint par ns meme; cheers
@bobrose7900
@bobrose7900 5 лет назад
Great video! Looking at your costs including the propeller it seem to be very good value. A result! Alignment of engine and splined input shaft seemed to go too easily... luck or judgement but rotating the prop shaft whilst in gear would get over any issues. Sealants and gaskets don't usually mix but you've got experience of this with your engineering history. Nice professional job, well done!
@SailingBritaly
@SailingBritaly 5 лет назад
Bob Rose Hi Bob, thank you. Positioning the saildrive leg and holding it in position with lines and the stand below was judgement, manually lifting the engine up and sliding it aft straight onto the shaft was pure luck! Cheers, Chris 👍
@yusuftopalogluizmir
@yusuftopalogluizmir 3 года назад
Awesome video with lots of interesting information thank you for sharing
@SailingBritaly
@SailingBritaly 3 года назад
My pleasure, subscribe for more! Chris 👍
@andersjakobsen9906
@andersjakobsen9906 5 лет назад
Hello you three. I think Volvo now say you should use the same oil on the drive, as you do on the engine..... Some help from karma with the boat stand....nice fitted. And the nice gray old oil showed that you needed it. Apart from that, I like to work on my own. But to enter the engine I thought was easier with two people ☺️ You did it faster alone. Good job 👏👏 Fair winds,,,,,,,,,/),,,,,,,,,,
@SailingBritaly
@SailingBritaly 5 лет назад
Hi Anders, thank you! Yes, I have heard about the oil recommentation, but when this saildrive was first fitted in 1993 it had gear oil, so I prefer to maintain the same kind of oil in her. Engine oil also seems a bit too viscous to me for this job, but perhaps that's just based on what I've seen elsewhere over the years. I didn't think it was going to be so easy to get them back together either, that was a nice surprise. 🙂 Cheers, Chris 👍
@peterplantinga2127
@peterplantinga2127 5 лет назад
@@SailingBritaly Volvo wrote a service bulletin in 2010: number 44-1 85 2; it states they changed from ATF to engine oil for saildrives types 130 and 150. No clear explanation why, but it allso recommends to change to engine oil when the clutch engagement is "delayed". Regards Peter
@Medwaydroneexploration
@Medwaydroneexploration 5 лет назад
Great video guys, Even though i'll likely never change a sail drive diaphragm in my life i still found it interesting all the way through, gives me an idea how boats work :) Great to see my Drone footage still coming in handy too :) Emma's laugh is so funny :) Catch up soon Garreth
@SailingBritaly
@SailingBritaly 5 лет назад
Hi Garreth! Never say never, you might own a boat with a saildrive one day... Your drone footage is excellent mate! I look forward to seeing you again soon. Cheers, Chris 👍
@kdl0
@kdl0 Год назад
Your engine bed is a lot different than the newer ones, they don't have that deep gap behind the engine mount areas almost until you get to the flywheel. Also - do you think that adding permatex might change the shimming needs? That will add a tiny amount of length to the transmission.
@sailinghector6323
@sailinghector6323 5 лет назад
Excellent video! Thanks for posting and explaining it all so well.
@SailingBritaly
@SailingBritaly 5 лет назад
My pleasure Nick. Cheers, Chris 👍
@ratusbagus
@ratusbagus 4 года назад
50 years ago @ 16 my younger brother and I would remove old banger engines and repair big ends, shells piston rings etc. Great fun hobby. We'd support and/or remove the engine block a tripod and 5/6 times blocks (one with rachet) and quarter inch cord. 50 years on, I'd have used these block/tackle hung from a beam across the companionway. Perhaps no blocks. Some people use the boom. In the late 60's we tikes bought a special clutch alignment tool... that was ditched in favour of a far more successful section of broom handle.
@SailingBritaly
@SailingBritaly 4 года назад
I removed an engine & gearbox from a car (to replace the clutch) on my parent's driveway when I was a teenager. I made an engine hoist by tying bits of wood together with string to form a long cantilever which was counterbalanced at the far end on the flat garage roof with some paving slabs. I then used a chain hoist to remove & refit the engine 'on my tod'. It did the job just fine, despite its Heath Robinson appearance... Using the boom as a crane was my first thought for moving the inboard engine, however the lead of it would have been incorrect due to the position of the structure above and fwd of the engine. This would have swung the engine forward about 1 meter whilst lifting it. This would have been more difficult to deal with thann just shifting the engine around with levers, so I didn't go for that option. In the end I discovered the engine was manhandlable and I lifted the aft end of it onto the saildrive and slid it backwards on to shaft by hand. Cheers, Chris 👍
@ratusbagus
@ratusbagus 4 года назад
@@SailingBritaly I saw your body position when you pulled the block. It was perfect for using all your leg muscles along with shoulder/biceps all at the same time as your body weight cantilevered over a fulcrum somewhere at the calves. So you could lift and pull probably more weight than your engine (given decent handholds). But basically Chris, it was a two person job. Well done. Feeling your way through a job, hoping you don't stuff it, all the while thinking about a deadline (presumably with cost implications). Full marks for fortitude. Yours and my parents were very understanding, giving us great leeway at the cost of "what the neighbours think". Yours though, would today risk being reported for "safeguarding" concerns. The garage roof structure worked.... But nobody (including you), knew that. Many would be saying the rosary.
@From_Refugee_To_Yacht_Owner
@From_Refugee_To_Yacht_Owner 3 года назад
Hi, I love your videos. They are very informative. I'm saving them for future reference. I like your DIY approach. I'm on the hunt for a boat myself However is quiet difficult so look at boats right due to the covid19 restrictions. I got my eyes on a Ohlson 38. Thanks for Sharing.
@SailingBritaly
@SailingBritaly 3 года назад
Hi Luis, thank you! A lot can be done remotely, including negotiating on a boat. We have done this many times and have agreed substantial price reductions (well over 30%) from the comfort of our home. Funnily enough I'm currently launching a course on this very subject: www.boatbuyingblueprint.com Cheers, Chris
@digitalfantazia3953
@digitalfantazia3953 5 лет назад
Another great video Chris. I havent got a saildrive as I am on outboards and propshafts but if I did I would be watching your video. :) for tips. A good comprehensive chapter. Had a very worrying incident once with a propshaft. Both jibsheets fell over each side of boat while underway because our charter co forgot to put figure of 8 knots on bitter end of sheets after last hire and we overlooked it...duh.... Anyway upshot was (sods law) that they both got wrapped round prop and ripped the gearbox mounting plate off the engine face, causing the prop shaft to slid down inside the outer shaft tube a few inches. Not nice at 8pm at night when the wind drops in the Med. Thankfully it didnt bend the shaft or slide and drop into the med and fill the boat and leak...!!!!. No idea what impact it would have on a saildrive leg in the bottom of boat..... so worth knowing from our mistake. Always put a stop knot in end of jib sheets if they go far enough to back of boat to be near the prop. If your ever up our way send me a ping. Fair winds David
@SailingBritaly
@SailingBritaly 5 лет назад
Hi David, thank you for your comment and for sharing your experience with the jib sheet / prop encounter, it only takes a minute for a trip to go from super chilled to oh flip! Sunny Blackpool will always be "home" for me :-) Fair winds, Chris 👍
@CadohaAdventures
@CadohaAdventures 5 лет назад
Awesome video, really easy to follow along. 👌🏻
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Carly & Dom, you guys have a great channel and will do very well indeed! Chris 👍
@CadohaAdventures
@CadohaAdventures 5 лет назад
Sailing Britaly well as long as our family and friends can follow our travels through the videos and not get too bored watching, that'll do, anything else is a bonus. We too have a sail drive and I have to say, judging how pristine your old one looked, I'm not going to panic too much that ours is dated 2010, although if I do find the nerve to tackle job myself, I'll be sure to bung you £50 to say thanks for the tutorial, and you can hold me to that 😁🍹
Далее
iPhone 16 & beats 📦
00:30
Просмотров 157 тыс.
YANMAR SD20 seal replacement. Ep.61
26:05
Просмотров 13 тыс.
#saiho
1:01
Просмотров 1,1 млн
#charliegee x Florence Cathedral
0:13
Просмотров 27 млн