Samsung 50” LED TV - No Picture Bad Backlights - How To Replace LED Strips Model UN50

Подписаться 197 тыс.

Просмотров 187 тыс.

50% 1

Samsung 50” LED Backlight Repair
CLICK HERE for TV Parts: www.shopjimmy.com/samsung-bn96...
SKU: sj-BN96-28770A/BN96-28771A
Part Type: LED Strips
Part Number: BN96-28770A/BN96-28771A
Part Usage: LED/LCD
MFR Part Number 1: Samsung BN96-28770A
MFR Part Number 2: Samsung BN96-28771A
Board Number(s): 2013SV50_3228N1_B2_L08_REV1.7_131015, LM41-00001Z, 2013SVS50_3228N1_B2_RE07_REV1.7_131015
Substitute Parts: BN96-35206A/BN96-35207A, DF500BGA-B1 LED Strips, T500HVF02.2 LED Strips, D3GE-500SMA-R3/D3GE-500SMB-R2
Panel Sticker Number: CY-DH050BGNV1H
Panel Manufacturer: Samsung
Brands: Samsung
Important Message: 28770A and 28771A can sometimes but not always found printed on the barcode stickers on strips.
TV Part Types: LED Light Strip
TV Models:
Samsung
UN50EH5000FXZA IJ06
UN50EH5300FXZP
UN50EH5300FXZX
UN50H5303AFXZP
UN50H5303AGXPE
UN50H5303AGXZS
UN50H5303AHXPA
UN50H5303AKXZL
UN50H6203AFXZC
UN50EH5000FXZX
UN50EH5000FXZC
UN50EH5300FXZA
UN50H5203AFXZA IH02
UN50H6201AFXZA
UN50H6203AFXZA
UN50J6200AFXZA
UN50J5000AFXZA DD02
UN50EH5300FXZC
UN50H5203AFXZC
UN50J6200AFXZC
TV Repair Made Easy™
© 2017 ShopJimmy.com, LLC.

Хобби

Опубликовано:

18 окт 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 92

@geminwanzo 5 месяцев назад

Just bought a set of Led through this channel for my Samsung un50ju6500f repair and followed this video step by step. Guess what, my TV is back on alive! Their Engineer, Randy, helped me with the diagnosis and figured out the Led boards were bad. They show caring to their customers; their works are appreciated 😊

@yerfdoga 11 месяцев назад

Awesome. Just bought the parts from you guys and did mine following this. It works great. Mine was only 55" so I wouldn't have thought so much difference. The large metal shield over the scan drive boards might have been easier to remove when it was on its face. I had a TON more adhesive tape. The LED strips were eight assemblies and they connect to a bus not wires. Took me a second to see how to get them to release. Press the two metal central tabs while pulling outward. Great video.

@stevenflaherty8807 3 года назад

Really got to thank you guys for making this video. I been on the fence about replacing the leds for our Samsung 4K for the last year. Finally decided to visit your site today and order the strips. Think I can not goof this up too bad so thanks again for putting this video out there.

@user-gf6gf2iy2k 3 года назад

How did it go?

@jaimeroberto3188 Год назад

Thank you. I didn't even know it was possible to repair these TVs. This video made it easy. I owe you a beer.

@abbott21234 6 месяцев назад

really nice simple way of putting this tutorial no talking just straight to the point

@TampaTec 6 лет назад

good job. liked 👍

@JasonLeechVoiceover Год назад

Hey thanks for this, it helped me a ton when I just fixed my similar sharp tv. 👍🏼👊🏼

@silverhoof1027 2 года назад

Love your repair video love the shop! I got some parts there a few days ago and they where perfect !

@UnWorthyDaisy42 3 года назад

It seems like an easy job, my backlight died after 3 years with this tv I bought after moving out, no warranty so I'm gonna give it a shot. Liked.

@DeadLemonz 2 года назад

Super simple, I didn't have the glass cups so it is possible without them, just be very careful and make sure the screen is supported in the middle at all times.

@jimlawler2138 3 года назад

Great video, step-by-step, very easy to follow. It worked for me on the first try, (which rarely ever happens for me). Thank you!

@laceymcnamara 3 года назад

What part did you buy? We have the same tv but can’t seem to find the correct LED strip. Hoping to use this video to fix it but want ti make sure we have the right part!

@nicebike3908 10 дней назад

Used this as guide for UN50F6300AF backlight replacement, thank you for sharing

@HopeDrive 5 лет назад

We did it, thanks to you

@marcelaummmm 2 месяца назад

Thanks for this video!!

@AnthonyGrenier 3 года назад

Looked easier than it was, took me 2 hours to pull it apart and put it back together. Couldnt get the outer screen to line up in the bezel again, the picture did return but vertical lines seperating 6 sections of the screen now appear. Going to buy a new tv in the morning.

@MrSanesaw 3 года назад

Im watching this now,and wondering if it's worth the bother? My Samsung 55" has a purple spot. Was it something that you did wrong to cause your repair to fail?

@AnthonyGrenier 3 года назад

@@MrSanesaw i followed the tutorial, to the letter, when i removed the outer screen with the suction cups the ribons attached to the bottom/back wouldnt line back up again no matter what i did. The screen was out slightly no matter how I tried to line it back up. But when I put it all back together, somewhere half the screen stopped working. Im thinking when popping the 4 ribbons on the bottom, one may have torn. Thats the only thing I can think of. Im pretty tech savvy but this is not as easy as it looks.

@MrSanesaw 3 года назад

@@AnthonyGrenier Thanks for your insight Tony! I ended up replacing the Samsung with a Sony OLED 65" that Im very pleased with. I still have the 55" Samsung...The repair sounds easier than it looks! It has one purple patch above where the HDMI ports are located in the rear of the set.It's a heat issue I was told by a local tech. I don't think I'll bother trying this repair it now! I'm mechanically inclined, but it sounds like it's best left to someone who done it before. The repair shop told me the repair cost as much as I paid for the set. I was very disappointed in this Samsung! The ironic thing is I still have my 42" Samsung Plasma purchased in 2006 for $2300 in my family room. It works perfectly!

@bbasche 3 года назад

@@AnthonyGrenier 1/2 MY SCREEN IS NOT WORKING EITHER. I THINK THE TUTORIAL COULD HAVE BEEN MORE DETAILED. DID YOU EVER FIND OUT WHY?

@johnstangohr2249 5 лет назад

I have never done this repair before, but I am planning out how to do it before I start. When removing the LCD layer, I know that it's delicate and also collecting dust on it can be a problem. Instead of laying it down off to the side horizontally somewhere (and picking up a lot of dust), what do you think if I were to set it up vertically, resting it against a wall? This would keep dust off off it for the most part. I doubt this would damage the LCD panel, but I've never handled one before. What do you think? Is this OK for the panel as long as it's not laying on the ribbon cable?

@vincentlekeateh1088 2 года назад

Hello thanks for the video.

@Funkymojo75 Год назад

Thanks for the video Jimmy. I managed to replace the new backlight led strips. But even with the new backlight led strips, there's still a few white circles on my Samsung tv screen. It's not as much white circles as before but there's still a few. The white circles are more faint now though. Is it normal? Could it be that the faint white circles are actually screen burn in because i took about a year to replace the damaged backlight led strip with a new one. Thanks...

@antoniobeatriz6634 4 месяца назад

you're great! nice video!

@djamelfettouhi 6 лет назад

good ripartion led tv

@cat-lw6kq 6 лет назад

FYI Lift back cover up carefully and unplug cable going to Main Board and for Smart TV's unplug Wi-fi cable before removing Back Cover

@chapstickevo 4 года назад

This TV specifically which is the UN50J6200XX was one of the biggest fails they made and complaints poured in. Im just dealing with this now. I am going to total out this to my customer. worth it to move on..

@wilbertog58 5 месяцев назад

Greetings from Puerto Rico, thank you so much for sharing your knowledge with us. I would like to ask you for your help if you can. I have a Samsung tv model UN49M5300AF that had a bad LED strip, so I boughted the whole set by mail but the carrier bent the package to fitted in the mail box. I managed to save 2 strip but when finish to install them all the lights are just blinking, What I did wrong? I also forgot the order in which the two plastic sheets are going in reference to the screen and the sides too. Your help will be greatly appreciated. Respectfully yours, Wilberto Gonzalez

@maxsmith3779 5 лет назад

Needs a time lapse over long unscrewing

@leleblanc 2 года назад

Do y’all Sale the plastic Rivets that hold the led strips securely ?

@bagoestech9941 4 года назад

How many volt a Led? 3v or 6v?

@julianf147 2 года назад

O nah I can’t do this……I’m paying the repair guy

@purochikano1 6 лет назад

Where can i get the led i need them for my tv

@dannyboy6114 Месяц назад

My led diffusers have fallen of and the dots where they sit a corroded and crumbling. I've tried gluing them back on with locktight super glue gel but they aren't sticking.Am I aswell buying new led with diffusers already on.

@preeteshdongre3804 6 лет назад

Hi, I have a Samsung led TV with black vertical strip problem.. It's about 3 inches. Not sure can that be repaired/replaced. What could be the reasons of this? Experts pointers please. TV is KU6300 6-Series.

@Kujo396 4 года назад

Model: UN50H5203AFXZA Type: UN50H5203 Version: MH01 I plug it in and push power button on remote, stand by/red light solid comes on solid, push power button again it flashes 5 times then goes off, has black screen, I can see video with flash light test, can only see the infra red light and 1 white light with back cover off. Does this point to the led strips only or is there something else it could be yet.. Has video no back light, video I watched says it is either the Back light inverter or the LED Driver.. what is the LED Driver, is it software or hardware?

@alexandremoreau5343 2 года назад

where u buy ur new componants?

@TannerHawkins 6 лет назад

I have a Samsung tv and it has a dark blue screen and no image at all it has sound when I turn it on has back lights and it fails the flash light test I replaced the t con board but It did not work please help

@ernesturquiza9952 3 года назад

You didn't show when or if you reinstalled the plastic plugs or clips.

@bbjelmirador3975 3 года назад

True he didn't and I was waiting to see it as well

@ahhyeah 2 года назад

Same, The little white tabs you pop out at the very beginning go back in after you plug in the LEDs. This video skips this. You can see at one point he's holding them in his hand as he installs the LEDs. I missed this step when watching the video and had to take it all apart again once I noticed leftover parts... 😢 Otherwise, great video and I got it going again!

@bumCamilo. 7 месяцев назад

I have Samsung model UN60KU6270F where I can get the backligth??

@jhophy Год назад

What causes Backlight to get spoiled .. I replaced a single Backlight, 2 months later the same backlight which was replaced is already burnt and spoiled... All other Backlight are working

@pmaradiaga9073 3 года назад

My Samsung has full picture but only the middle is bright lighting. The top and bottom portions are a bit washed out but not too much. Will this fix it?

@vincentlekeateh1088 2 года назад

Where can I find the backlighting for my TV

@abbyogle6104 6 лет назад

I purchased and replaced led light strips on my Samsung UN50H6201AFXZA through ShopJimmy. My tv screen had no picture showing but showed faintly with a flashlight. TV also did not have lights showing through or under back cover. After led light strip replacement tv shows lots of white light, and vertical lines of all colors. There is a bar of good picture on the top 2" of screen. Wondering where to go from here. One question I have is what to do with small white plastic rivets, your video does not describe reusing them and I realized the rivets are not reusable when putting things back together. Can I tape the strips to the reflective paper? Right now I have rivets that have fallen out which I can see along the bottom of the screen through the white light. Have you seen this picture problem before?

@BuckHunterNb 5 месяцев назад

My samsung has sound. I can see the image very faintly when i put light up to the screen. I looked through the back vents and see 2 tiny blue lights. Is this my LED strips gone bad or the power supply board???

@MI-iz7hw 8 месяцев назад

why would you change those led backlights? i mean what is the trigger to do so? i m asking because my tv is showing blue spots on the screen. can i fix it with changing the back lights?

@HpcShadow 2 года назад

Hey guys jus looking for some help 3 mths ago a technician supposedly replaced the strips on my samsung 43 inch smart tv. It went bad again, no light but you can hear sounds and if you shine a light you can see the on screen images. Note the tv power light will blink 5 times when turned on. I didnt find any help on forums online, maybe someone can point me in the right direction

@DIYChris01 3 года назад

Anyone know where I can find a replacement LCD panel for Samsung un50j6200afxza that isn't $700? Thanks

@nickhaley1212 2 года назад

Got 1 for 400 in PA

@cfscentertainment9732 3 года назад

I have a UN50EH5000F Samsung, when I plug it in, the top of the screen blinks but nothing else happens with the screen. Any ideas?

@MrAgentMoo 4 года назад

does the reflector sheet also keep the led strips from falling? seems like they would simply fall once the TV is upright again, no?

@KingTen91 4 года назад

They're adhesive

@jvincemusic 4 года назад

KingTen91 no they arent

@KingTen91 4 года назад

@@jvincemusic yes they are I replace them all the time

@nickhaley1212 2 года назад

Use double sided tape, lmao , And yes some have adhesive some do not the ones that do not use double sided tape

@ahhyeah 2 года назад

The little white tabs you pop out at the very beginning go back in after you plug in the LEDs. This video skips this. You can see at one point he's holding them in his hand as he installs the LEDs. I missed this step when watching the video and had to take it all apart again once I noticed leftover parts... 😢 Otherwise, great video and I got it going again!

@cnm642 6 лет назад

Hi Jimmy - How do I know it is the backlights? Do they all go bad at the same time? Basically, I watched your flashlight test and checked everything there. Doesn't seem that I see any back lights. Cannot see any images on the screen doing the flashlight test. I don't see any boards with any issues with being shorted from a visual inspection. I don't see any backlights so should I assume it is the backlights? Thank you.

@mikehellraiser143 6 лет назад

If your not getting power or standby light on Samsung LED try unplugging the LED cord that runs from the yellow power board through the back of the silver panel and power the TV on. If your standby light comes back on its a burnt out LED strip. Saves a lot of time and money avoiding jacking around with boards if the LED is bad. It only takes 1 of the 8 sections going bad to shut down the whole TV.

@Manjuju123 Год назад

Is it normal for all of the LEDs to go off? My TV will not show pictures, could this be a cause?

@esequiel97002 3 года назад

I have a 50" Samsung UN50H5203AFXZA that needs backlights, How do I order the right ones? when I search this model number, the results don't relate to the model number.

@Tig3rj 3 года назад

Not sure how you are searching..but on Jimmy page these models come up when I search the model you mention www.shopjimmy.com/bn96-28770a-bn96-28771a-led-backlight-strips-8-new/ www.shopjimmy.com/samsung-bn96-35206a-bn96-35207a-led-backlight-strips-8-new/ www.shopjimmy.com/samsung-df500bga-b1-led-backlight-strips-8-new/ www.shopjimmy.com/samsung-t500hvf02-2-replacement-led-backlight-strips-8/ The only way to know for sure is to take it apart and look at the model of the LED lights as their will be tags on them...Of course, that can be a pain!!

@esequiel97002 3 года назад

@@Tig3rj Thank You!

@Gelzzky 3 года назад

How much will it usually cost if i bring a tv with backlight promblem to a repairman?

@mrbigglesworth2553 3 года назад

my guy quoted me 300

@volpswagen_marco 6 лет назад

Hello. I have a RLDED4633A-C RCA TV with the no image but sound syndrome. I did the flashlight test and I see image. I tested all my voltages and are ok. I checked for voltage at LED connector from power supply and have a constant 94 v. I did this test with and without LED connection plugged. My question is... is 94 v the right voltage? I did notice when measuring and turning on TV the voltage starts up around 200 or so volts and goes to 94 v. (Both plugged or not plugged). I’m hesitant to go further in to check the LEDs because right now, I’m not sure if 94 v is correct. Any help would be awesome thank you.

@preeteshdongre3804 6 лет назад

@johnnyj540 6 лет назад

mfx3 Try asking the same question at www.tv-forums.com/ they are pretty good at trouble shooting for free.

@volpswagen_marco 6 лет назад

Johnny J thanks, I finally figured out the issue (1 burnt LED), but I’ll keep that site in my mind for the next time.

@luisolivares5315 6 лет назад

Hi guys I have a LG50LN5400_UA and when i turn it on it flashes white and then it goes to a dark screen but you can still hear the audio from the tv please help me what wrong with my tv and tell me what i need to replaces thank.

@johnnyj540 6 лет назад

Luis Olivares ...try the link on the reply I left for mfxe about a week ago read all the replies again, there is a link to a forum that helps with questions like yours.

@Ralph2 3 года назад

You'd almost think Samsung would prefer you to buy a new TV. I'm sure with a modicom of redesign this could have been so much easier, PS I won't be buying another Samsung. Picture quality 10/10. Firmware/software 0/10.

@rjl1309 2 года назад

Of course... don't show us the working screen.

@diegobocanegra1177 3 года назад

Buenas tardes amigo me puedes ayudar a destapar un tv de led marca Olimpo es que están fallando los led es de 48 pulgadas gracias cun video porfa

@bernardocastillo3290 6 лет назад

where can buy backlights

@ObiJuanKenobe Год назад

Really, didn’t even turn on the TV. Fail.

@jessecarter5490 3 года назад

That seems like more of an expensive repair than to buy a new tv? How much does a repair like that cost for those who don’t have skills like that?

@paths1111 3 года назад

$49 for the LED strips (46" TV). Add another $17.50 if you need a pair of suction cups. Worked perfectly for me.

@ahhyeah 2 года назад

@@paths1111 Same, $50

@VivekKankhara 6 лет назад

does anyone here know anything about replacing the backlight in Philips LCD pfl7482, the backlight bursts the ICS in the inverter board, I ve replaced them thrice

@johnnyj540 6 лет назад

Try asking the same question at www.tv-forums.com/ they are pretty good at trouble shooting for free.

@dds425 Год назад

Where can you buy that strips?

@ralphtorres2864 2 года назад

I'm wondering if this will fix the issue I have. Everything works on my tv. (Remote, buttons, sound.) But I just dont have a picture. Would this be the issue. Or would it be a fuse or something??? Please help

@christiangrindcore6190 6 месяцев назад

This is not 50" tv.

@bbasche 3 года назад

WHY DO I HAVE 1/2 A PICTURE ON MY SCREEN? SPLIT RIGHT DOWN THE MIDDLE, 1/2 IS BLACK, 1/2 IS PICTURE.

@ThisIsHarderThanIThought 2 года назад

i had the same issue. replaced the backlight on half side that is completely black. u can take off the back cover, then turn on the tv. u should be able to see the backlight come on thru all the tiny holes. in my case, on half one side, the led lights were completely dead...the other half was lit. replaced backlight and all went good.