Marvellously mint tutorial, fella. Had that exact issue and managed to get the screen with frame from ebay for £40. All sorted in under half an hour with your excellent step-by-step guide. Absolutely invaluable, thanks so much!
Thasnk you for the teardown and repair im 72 but a Ham Radio op since the early 1980 and a have a MaSTERS IN aSTRO COMMUNICATIONS BUT NEW SMART PHONES IS NOT MY BEST SO YOUR VIDEO HAS SHOLWN HOW TO MAKE MY OWN REPAIRS TO THE GALAXY A52S 5G AS I DID FOLLOW YOUR INFO AND FIXED MY WIFES GALAXY A52S THANK YOU 10/OUT OF TEN FOR THIS FIX IT VIDEO
I've seen other tutorials for this model and for me this one has the best explanations and camera positions. Thank you, this phone is a bit tricky... (my 2nd screen replacement)
Thanks for this video. It's the clearest and best explained of the type that I've seen. I dropped my A52s 5G out of a 1st floor window onto concrete! It was in a decent case so survived but two weeks later made a funny squeak and the display died. Luckily it was enabled for USB debugging and I was able to connect and use scrcpy to confirm that in fact everything works except the display. The device is not worth repairing if I have to pay someone else and hardly worth selling without a working display. Your excellent video and a link to a reputable vendor for a genuine spare part gives me the confidence to go ahead with doing the repair myself. Cheers!
Great angles and clear directions. Fast-forwarded at all the right times so we don't wait for 4 extra minutes while you unwind 10 screws.😊 Got my A52S back online in no time. Great idea to link a trusted partd supplier, too: even though I couldn't use them from the US, it helped me search for the proper parts on Amazon and eBay.
Thanks for sharing. Which board has the memory and hard-drive, and data? The upper board, or the lower board? The lower board is only for FIngerprint and charging right? Then the memory must be on the upper board, right?
Excellent video, straight forward & easy to understand.. I've changed lcd on xiaomi before.. Good thing i found this video since samsung lcd comes with frame & you need to move the boards from the old frame to the new frame..
Any tips for the Battery Adhesive? Should I purchase the original adhesive or use B-7000/T-7000 glue? I want to stick it back because when the phone was shaken hard the battery moves and it will disconnect the screen flex cable.
Is OIS (Optical image stabilization), part that can be fcked up during phone repair? Because i had my screen replaced, and its making the 2x louder rattling noise than before screen replacement. I know that the rattling noise is normal for phones with OIS but its way louder and more annoying than earlier. I can also add that the rattling noise is still occuring when shaking the phone in camera app (i just need to shake harder).
Dear friend, thank you for an important and professional video. Where can you get an original Samsung glue processing kit and what tools did you use? Thanks
Hello, I've got a question! I own this phone, it fell on the ground and now it doesn't turn on anymore. When I try, it vibrates weakly, but doesn't respond. Have you ever met this problem? Do you know what the issue is? The battery was full, the screen doesn't seem broken.
Thanks for the video... Is the outer plastic frame that looks metallic, just for aesthetics or does it have a role in sealing the phone to make it waterproof?
It's a part of the magnesium frame covered in something. This is supposed to be a sports phone so it can stand a small hit and not bend or break. It's heavy like a brick for it's size to be honest because of the robust frame. screen is the vulnerable part though.
looking for some advice, i have replaced the screen with a Chinese replacement... however the signal is not great, 115dbm, also the gps is way out, have i damaged something; eg the antenna or coxial????
Hello there.. recently watched your video. Can your please suggest me for something. I have recently damaged my Samsung A52s 5g mobile's motherboard. Should I replace it with new motherboard or go for new mobile?
My A52 5G back cover is falling apart, perhaps the original adhesive loose its grip already, in some videos, some replece double sided adhesive and some used the the b7000 glue, i wonder which is a better solution and do i need to remove first the residue of the original adhesive for both the cover and on the phone before changing the adhesive or applying glue, thanks.
@@iDoctorUK its hard to get a genuine adhesive though in my country without getting it from the authorized service center. What i bought is 3rd party adhesive from an online store, its compatible, but i noticed it's kinda thicker than the original adhesive i removed from the phone. Even then thank you for the advice.
My A52s ended up in the tractor snow plower : ) It now has a hole through its side and about 10 degrees bended inwards on the middle, but it still works just like yours! I would really like to extract my pictures and messages out of it. I've tested all possible software methods, so now the last possible solution is trying to hook up a screen to it. My question is: do I have to get the model specific screen for it, or would a screen from a different (cheaper) model work? Maybe the A52 one will work?
Nice guide! Just dropped my phone on a bathroom floor, whoops. Looks like I will get one of those frames+screen and give it a try. Maybe I get a new back cover as well. Mine's dented and scuffed up, and at this point it's only 20 euro more. Is it a hard repair? I'm an EE designer, but I don't have experience fixing phones as I always run away when stuff is glued together like this.
How about the main camerA it is normal that have a clearance because i notice the other camera is steady unlike the main camera is have a Clearance..it is normal sir?
I dropped my phone and it got a black spot but screen didn't crack and it slowly expanded to whole screen, the device starts and at splash screen shuts down to immediately start again over and over until battery runs out, do you think it's because of the screen or something else is broken?
Do you know anything about the safe mode issue of this model? I am not being able to solve it for quiet a long time and the phone is left unused. I tried u plugging the volume rocker and Display, it did not work
can i put this on my when my phone say SM-A528B/DS or i need to buy different one? And why when i find LCD Incell Display for my phone it says that i can´t have fingerprint? im just askin bcs i need to repair it but idk much about it and my friend that know these things is not home
ive replaced my screen as i dropped it and the screen went black but phone was still on. ive replaced the screen but the screen is still black... is there anything else it could be? any help would be great
I have a question, is it possible to give the a52s a better vibration motor?, i wanna see if i can just buy an offshelf one for the phone because the phone's vibration motor is so bad.
The size of the housing for the vibration motor is very small, maybe you would have to get another vibration motor and fit it to the back of the phone 😂
Hey, I got mine from here… repairoutlet.co.uk/collections/samsung-galaxy-a52s-5g-a528b-parts/products/samsung-galaxy-a52s-5g-service-pack-awesome-black-full-frame-touch-screen-display-gh82-26861a Thank you for watching
Hello. I had the same problem. I replaced the screen but now the screem is flicking?! Can you tell me what can be? I guess is the flex cable. Thanks for your attention and help
Hi is it possible to have another models screen fit to the A52s. I took mine to get a replacement screen at a phone shop and now there is a border top and bottom and the fingerprint sensor doesn’t work? Any help would be appreciated
The shop has installed a low quality aftermarket screen or "incell" screen, it's an LCD instead of OLED so looks much worse than the original and has borders and non working fingerprint as mentioned. The 120hz will also not work, it will be slightly laggy when using so you have to leave it on 60hz.
its not working for me, I know my phone is working but its still black screen after falling, any idea what could be loose? the screen cabel or something else?
I bougt my device in Greece and i went at a repair store in France for change the screen and they told me that they can΄t change the screnn because the screen model is different between the 2 countries. Is it possible ?
Hi my a52s went to repair, the back was coming off and there was burn in marks on the screen. I noticed now that it's back it looks like theres a slight bulk around the middle of the back just bellow the camera but opposite side. Is it normal?
battery draining fast , only 4 hrs screen on time with 60/120 both modes. tried battery replacement in samsung service center. still no use. any idea what might the problem.
i did the same things as you showed, but somehow when i boot the phone it goes in boot loops and stops at the samsung logo, than restarts. same if i try to charge it, it tries to light up and show the charging animation but doesn't know what to do and retries forever. What can i do?
Hi man, I have a problem with my phone, yesterday my phone got a coffee spill and now when my phone is hot the touch screen is not responding to my touch. Where do you think there is a problem?
When you are starting the phone with new lcd display it only shows samsung galaxy rather than samsung galaxy a52s. A52s word is missing. Why is it so when you are replacing with original samsung display??
I tried fixing my phone according to your video, the screen Is replaced but when I try to charge it, it charges for 5 seconds, then stops for a while And this repeates all over again, do you know what could cause this?
I need some help, after i took my phone in for repairs to change the charging port, my phone doesn't have signal anymore, it shows a circle with a line through and says no service, it's also a Galaxy A52s 5G, can anyone tell me what to do or what's wrong please
I took it apart, but looks like i have to change the screen... Since it dropped one time, the screen randomly stops working and stuff, but now its totally dead....
@@iDoctorUK Thanks for your anwser! I guess then there is no other way but changing the screen? I have seen videos where they changed the whole screen panel, took out the battery and stuff. Someone told me that if you remove the battery, you cant use it again, it is true? Thanks! :(
STOP caution, the bottom board is set. in the corner and is immoveable, and it doesn't just pop out with little or no effort, as shown. The out come a snapped and broken board. I was all going fine until the bottom board! I m guessing it is a manufacturing safe gaurd to inhibit home repairs!! Video needs rethinking!