Samsung Galaxy A52 5g Charging Port Replacement 

Amazing video! You saved me from buying a new phone. Easy to understand instructions. THANK YOU!

Thank you so much for this video, you just saved me a couple hundred dollars. I went ahead and Liked + Subscribed

Thank you so much for the guide guys, Easy to follow with simple steps. My phone can now be charged! Awesome

Without this my repair would be impossible. Thank you guys!!!

Great video. If the blue and white cables are reversed is that bad? Or are some phones manufatured that way?

Hi , if i got a52 5g k2 , can i use a52s 5g k2 board they both look same and have same number on top right corner?

I hav got samsung a52.... your video is very use..thanks brother.

Thanks alot for the help. My phone can now charge properly.

Great video. I played and paused it on my computer while I worked on my phone. When I plug it in now, it frequently restarts. Any ideas?

Hi, is disconnecting the battery absolutely necessary? Thanks

I replaced it because I had some issues with carging and with my microphone. It worked, but very quiet couldn't hear anything. When on speaker then it works fine enough. So I replaced charging port and charging is fine now but microphone still doesnt work. Thanks in advance

what is the blue antenna for in this video? i broke mine but phone works good?

is it important if the phone is A52s 5G SM-A528B K1 or K2 or DS when doing this process? or is the charging board/port universal?

Much appreciated.

Will it still be waterproof?

the damage of charging port does cause battery time increment ????

My phone would only charge in fast mode with one particular charger and cable. Otherwise, I would see a message reporting slow charging. The predicted time was often 25-30 hours, but charging always completed much faster (5-10 hours). The other symptom is that all OTG storage devices were not recognized. I tried replacing the charger port as described, but after the replacement, the fingerprint reader stopped working and none of the other symptoms went away. So, I put the original part back. Fingerprint reader is now working again, but the other symptoms are back. Thinking of trying another part. Any idea why the fingerprint reader stopped working with the replacement part?

can we get a52s 5g charging kit sir i want for my phone

Thanks for the video

Great video, helped a lot!

thanks u so much bro its work

Which model should I have buy k1 or k1

How to clean dust and foreign bodies in my a 52 Samsung charger pot

I clean the Charge port of my phone n try to charged it again bt still it didn't work. Please help

Does it still survive dipping in water? Still has ip 67 rating water resistant? Even I changed my galaxy a52 4g charging port in samsung service center I don't about water resistant still works or not can you please explain about water resistance ip 67 rating after charging post replacement

Mine for sure isn't water proof ... That's why it won't charge it says water detected in the port and starts vibrating. I ordered the actual charging port only, if it's soldered on will I need the charging board?

Are there different charging ports for A52 4G and A52 5G?

UPDATE!!!! THE PORT IS STILL ON THE WAY. I REMOVED THE BACK, BLOW DRIED THE BACK AND CHARGE PORT, USED A NICE FANCIER CORD FROM A SOLANA SAGA TO CONNECT IT C TO C... ITS CHARGING!!!!!!!!! it may not again but rn the pos is charging after laying around for over a year. Now water detected symbol. This is a Samsung defect.... Obviously.

Do the phone give back trouble agian once your fix it

I only ordered the actual port for $7 not the whole board is it possible to fix it with just the port. How is the port connected to the board

Hello, mine is fully replaced, still not charging. I'm lost now what to check next? Thank you.

Is heating necessary or can you pry it apart without heating?

My A72 got charging problem should i change it

What is the grey wire for?

Am I correct in assuming the thermistor is on the charge port circuit board?

Is that samsung a52 and a52s has the same charging board?

is there any difference between a52 4g and a52 5g charging flex? Please some one help me to find

Hello sir. Can u pls replied to me , can u upload avdieo how to remove and fix sim slot that stuck on samsung A52 s 5g pls1😢😢. When i put sim tray pin it not working pls help

I replaced the board, now my phone resatrt randomly. Seems like an hardware connection problem. But i dont see any issue. Do u have any idea whatbis causing my problem?

BANG BOARD CAS SAMSUNG A525F SAMA SAMSUNG A52 5G SAMA GAK

Thx you saved our Ass.

Please help i have switched the charging port. I have done everything correctly but now my phonr wont start or turn on. I did not disconnect the battery cable first because i watched another video and it didnt show that part. Is that what caused the problem? I took everything apart again and it still wont start

I did just as same as u did but its not charging pls help

Would it still be waterproof

after replacing pcp board my phone isnt recive any signal sim is working fine and on old pcp i have no problem with that any idea why ?

Hello, what would be the best way to heat up the back cover if I don't have a heating pad?

Just like someone else in the comments, my signal doesn't function anymore with the replacement part, while replacing the old one fixes the issue. Very sad that we can't buy parts directly off of Samsung and instead have to rely on third parties.

charging port of a52 is compatible for a52s?

Sir where I can by charging pcb bord on my samsung A52

Thaaaaaaaanks

That's ridiculously hard, Samsung obviously did that on purpose knowing it's the part set to break eventually.

How to buy charging board

Just replaced mine and I'm still getting 'check charging connection' notification on my phone. My laptop still can't read my phone. I took my phone to get looked at and they couldn't find a solution.

Folks he's taking of professionally but the back is easy to take of by hand

I hope that's a female tech, cuz the hands are kinda sexy

This phone sucks!

Pp

Way too much work...delete removing the camera cover, it is not necessary...don't you know that?