No video :(

Sandblasting ★ Painting a Motorcycle Engine | Wrinkle Paint

Подписаться 198 тыс.

Просмотров 49 тыс.

50% 1

CX500 Motorcycle Engine Sandblasting & Painting,
★ SHOP★ -www.caferacerg...
I'm so glad I made this cabinet, It made the job way easier with a much better finish, however, If you don't have a sandblasting cabinet you can always strip parts with paint stripper and sand them as best you can so paint will adhere, Its a bit slower but it will still work.
#CafeRacerSandBlasting #CafeRacerGarage #PaintingMotorcycleEngine
Wrinkle Paint amzn.to/2Y7pCPd
Sandblasting Gun amzn.to/2UuRkUH
Glass Bead amzn.to/34Dlwk9
How I Made the Sandblasting Cabinet Video: • Making a ★ Sandblastin...
ALL PARTS AND TOOLS I USE:
www.amazon.com...
Music I use, TRY IT FOR FREE bit.ly/2OR9jRq - AMAZING for RU-vidrs
💥💥Want to see exclusive content, behind the scenes footage, and get updates on what’s happening on the channel before it happens?
VIP giveaways, merchandise discounts and much more!
/ caferacergarage
=====================================================
For all commercial enquiries (Product Testing and Reviews): Please contact me at caferacergarage07@gmail.com
=====================================================
★ DON'T FORGET TO WATCH
=====================================================
★ 01. Best 360 Motorcycle Camera - Insta 360 One X
• Best ★ 360 Motorcycle ...
★ 02. Making a Sandblasting Cabinet from Scratch
• Making a ★ Sandblastin...
★ 03. Motorcycle Powder Coating Prep - Scrambler Build - Ep.41
• Motorcycle ★ Powder Co...
★ 04. How to Build A Motorcycle Subframe Template Under 10 Bucks
• How to Build A Motorcy...
★ 05. Honda CX500 Timelapse Teardown & fixing an oil leak
• Honda CX500 Timelapse ...
★ 06. How to fix leaking forks on a budget, Scrambler Build
• How to fix leaking for...
=====================================================
★ Goal - 1 Million SUBSCRIBERS
=====================================================
★ LIKE | COMMENT | SHARE | SUBSCRIBE
=====================================================
★ Please Subscribe Cafe Racer Garage Here:
/ caferacergarage
goo.gl/cjRKUC
=====================================================
★ CONNECT WITH ME ON SOCIAL MEDIA
=====================================================
★ Instagram: / cafe.racer.garage.07
=====================================================
★ Facebook: / caferacergarageau
=====================================================
★ ABOUT MY CHANNEL
=====================================================
Hi Folks,
This is Dan, let me show you step by step on how I build stuff each week including my CB750 Cafe Racer & the (Honda Scrambler/Tracker build on a budget challange) SUBSCRIBE to follow my future builds, I'm based in Australia.
=====================================================

Опубликовано:

25 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 71

@julianparrott 4 года назад

If your exhaust valves are open, you will have sand on top of the pistons, and it is so fine it will fall down the side and settle on your top rings. Then most likely stick to any carbon or bind up and score up your cylinder walls. You have most likely forced grit under your oil and water pump seals as well. Also painting oil seals will make them go rock hard and leak. The only time I would sand blast engines like this, would be for a strip and rebuild. Good luck. Finger and toes crossed for you mate. Hopefully you don't loss your compression within 50 miles

@CafeRacerGarage 4 года назад

jules paz I’m always learning brother I never pretend like im an expert and it’s great getting advice like this from people that I have done it before, I was thinking about taking my heads off just to be sure, in hindsight I may have done things a little bit differently. Like I said I’m always learning ☺️

@oddis188 4 года назад

Man you really trusted the mattress pieces to cover the exhaust ports😳 hopefully nothing went past. One thing I've learned with media blasting is that the small shit goes in every little hole too easily. Hopefully all is well. It looks 100 times better now!

@justinbelshe 4 года назад

That's why I only blast engine bits with soda! If you miss a little bit of media, it won't harm anything, and it comes out with the next oil change.

@CafeRacerGarage 4 года назад

oddis slajos if it went in the exhaust port hopefully it will come out when I start it. It’s the internet that I was worried about

@fader2701 4 года назад

I would have enjoyed a much longer version of this video even more.

@TheSumpek 4 года назад

Me too This video very entertaining

@justanothernoobe 4 года назад

I love your work, man. You get the right balance of detail and simplicity. The best bit of this though is definitely around the 4.22 mark :)

@CafeRacerGarage 4 года назад

Luvin Itall thanx mate, 👍

@vibemunster 4 года назад

I normally take the time to make aluminium plates to cover the ports and silicone them in so no chance of blasting medium getting inside.

@beefyu.k.1600 4 года назад

Nice love your vids I found the best part of this to be @ 4.20 🙊🤪

@Gus-cg9yp 4 года назад

Hi, great job ! that wrinkle stuff looks lovely, thanks . Gus

@CafeRacerGarage 4 года назад

Gus thank you Gus ☺️

@mihailokacarevic6945 4 года назад

Haven't watched Your videos for some time, I've lost hope of finding a donor bike. But it's nice to see that You fixed the audio balance, much more enjoyable. Cheers.

@BareBonesMotorcycles 4 года назад

Excellent finish dan, your cabinet worked a treat. Awesome job. 👍

@CafeRacerGarage 4 года назад

BB's Customs thank you mate 👍 glad you liked it

@JP-nd9jq 2 года назад

I was enjoying the video then I Dream of Jennie came out then it was even better!!! God job brother!!!

@garya3056 4 года назад

Holy hell, that is going to look seriously cool, Mate! Nicely done, Dan... 🏍👍🏍

@CafeRacerGarage 4 года назад

Gary A thank you Gary 😯 hope so

@garya3056 4 года назад

Cafe Racer Garage 😎👍

@danielelampis9144 3 года назад

Two likes, one for your work, one for the beautiful girl😂😂😂

@xpd44.outfitters 2 месяца назад

Hey man, great videos! Curious to know how this paint holds with time? Cheers

@Miner0807 4 года назад

No shortcuts here ;) Looks really nice. Your channel gives probably to much inspiration, so i picked up a CX500c 1980 modell and a CB750 1982 modell yesterday.

@CafeRacerGarage 4 года назад

Vidar well done mate that’s awesome 👏 congrats

@Dave.Wilson 4 года назад

As they say in the UK, 100 yards pretty! Looks good from a distance. After all the good fabrication work you did on the frame, spoils it a bit really.

@nicholasmooney9611 4 года назад

David Wilson bear in mind it’s a budget build though, I kinda agree though. I’ve certainly seen a whole lot worse, and to be honest I’d only go to all the trouble if it was my own bike. Depends on if he’s gonna flip it. I’d definatley change out the engine casing bolts though.

@anthonybautovic823 4 года назад

Love the crinkle paint look bro. Cute background model too 😊

@justinbelshe 4 года назад

Is that coal slag? Aluminum oxide? Baking soda would have been a better, safer choice for blasting media. Blasting a complete, assembled engine seems hurried and slapdash to me. What kind of shape are the engine internals in? I always disassemble an engine so I can inspect and replace any seals or bearings that are worn out or rotten from age or oxidation. Cylinder heads almost always benefit from some degree of porting and polishing, gasket matching, new valve guide seals, etc. I want to improve the engine's performance, not merely change its appearance.

@CafeRacerGarage 4 года назад

Justin Belshe thanks for your comment mate what you may or may not understand is that this is a budget build challenge so pulling the engine apart and replacing seals and bearings when the engine is perfectly okay wasn’t in the budget, once I’ve completed the challenge I can then do other things like increase the engines performance change the carburettors rebuild it and so on😊 Hope that makes sense

@justinbelshe 4 года назад

You're right, I *didn't* know that it was a low budget challenge. That said, I still recommend soda blasting in the future. It's much more gentle on aluminum parts, but tough on rust and carbon deposits. It's water-soluble, leaves the surface with a frosted white appearance and just enough tooth for paint to adhere. Glass bead is the media of choice for steel. If you have the budget for it, vapor blasting does a hell of a job, and leaves the bare metal smooth and bright, nice enough to leave unpainted.

@fiorellogalluzzo7282 4 года назад

Great job as usual. Just wondering how you went with keeping the grit out of the places that were taped up? I blasted my engine in a similar way before pulling it apart for rebuild and I found that some of that stuff got in where I did not want it but was no drama as I was fully dismantling and rebuilding anyway.

@CafeRacerGarage 4 года назад

Fiorello Galluzzo It was pretty well sealed however, i’m going to remove the heads just before I fire it up to make sure there’s definitely nothing in there. In hindsight I probably should’ve spent a bit more time making a better seal. I’m always learning

@peterthomas7203 4 года назад

Great set of videos, thank you, I find them very helpful and I have just painted my engine too - different paint though. Did you use the heat gun to just quickly dry the paint or will that cure it properly? My paint needs 200+ degrees and I have tried heating mine but gets nowhere near hot enough. I am hoping it will cure when I get it running but that may be a couple of months yet! No way I can get it in our oven at home either 😉 Cheers

@patrickmcg9734 4 года назад

You can use a heat gun with crinkle paint to help get a uniform finish.

@onlythetruthfull 4 года назад

very good video sound quality much better without blasting music and low speech , i can know subscribe and watch without disturbing the other half's soaps.

@garyyorke1080 4 года назад

Nice job Dan . Im guessing the paint is the high temperature wrinkle stuff used on the head covers as before .. couple of mods to the cabinet and you can do a lot more when you need to blast now .. great short vid as always

@CafeRacerGarage 4 года назад

Gary Yorke yes same stuff :) I’m not sure if I will keep this cabinet to be honest, it’s just to use for the engines at this stage, I have my eye on something else that will do a way better job

@n.k.coatingsandblasting 4 года назад

hello my brother ... try using sand glass beads so that your machine looks clean shiny

@pkck97 4 года назад

Buddy!!! Looks great!!!

@CafeRacerGarage 4 года назад

Peter Kowalinski thanx mate 😋

@BOBBER400 4 года назад

Good job on the sandblaster m8 : )

@gctdonyre 4 года назад

I agree, it works pretty well. I wonder if it's gentle enough to be used for cleaning carburetors too.

@CafeRacerGarage 4 года назад

BOBBER400 thank you mate it works well

@filmdetective 4 года назад

Dude! If you don’t want your stand to fall over, you could open it up more until the cross beams are horizontal, that’s when you know the stand is widest open... and made put a weight of some sort on the cross beams, if there’s wind Cheers

@CafeRacerGarage 4 года назад

filmdetective Thanks mate, very good points👍 if I spread it out to far I end up kicking it at falls over anyway. I should put a weight on it but I get carried away with other things and keep forgetting, I had a handy helper this week lol 😂

@filmdetective 4 года назад

Cafe Racer Garage I hear you, maybe a heavier stand then... ;)

@officialmysteriousrider6327 4 года назад

Its best to keep the old sand media I dont throw away the sand that's been throw blast cabinet about a million times lol its good for cleaning aluminum ive just done my own cases but just make sure they have been cleaned & cleaned & use air gun aswell i just use paving sand dirt cheap about £2.50 a bag from b&Q

@CafeRacerGarage 4 года назад

Mysterious Rider great idea mate, just be very careful with sandblasting, I use a respirator always, silicosis is the deadliest thing and irreversible. I don’t want to scare you but just do a quick google search on silicosis. It definitely made me change the way I was doing things. All that aside I really like your idea about saving the sand for cleaning :)

@SleuthHustler 3 года назад

Do you have this for sale on gumtree? Or is it an exact replica

@BaikalRaymond 2 года назад

What paint did you use?

@abornwalrus69 3 года назад

What kind of tape is that? The clear with white lines one

@jaytitus902 4 года назад

Your vids and content are spectacular. The amount of time perfect. Normalize your audio. I am sure that there is a normalize button in your audio menu.

@guilhermeginiescki8069 4 года назад

Awesome

@laurentaxess8034 4 года назад

Hello, may i ask you, how did you take off the engine of the chassis (i will look your other videos of course)? and don't you paint the bottom of the engine ?

@michaelatejnorova5044 4 года назад

nice!

@lewiscast3753 4 года назад

Here from "Classic Octane" Sub'd

@CafeRacerGarage 4 года назад

He is a legend :)

@libertyman3072 4 года назад

✌🏿😜 VAS-Y T'ES BON BON BON 💪😜 🖌 🖌️🖌️🖌️🖌️🖌️🖌️🖌️🖌️🖌️

@pontaduck89 4 года назад

does anyone know what the intro music is .. I so want it

@lonerider666 4 года назад

After just sandblasting my engine I am now concerned about media getting into the motor. Would a decent engine flush with kerosene and removing the head and blowing it all out be sufficient?

@CafeRacerGarage 4 года назад

Sometimes the sand can get stuck between the 2 piston rings and cause some damage inside your cylinders when you start it up so do your best to try and flush it out as best you can

@lonerider666 4 года назад

@@CafeRacerGarage thanks for the reply. In hindsight I wish I prepped the engine better but if I remove the top end and flush the engine several times and remove the sump pan and blow it all out I cant see why it wont be fine. Great channel keep up the great videos its helped me out alot on my CB750

@gctdonyre 4 года назад

Have you experimented or tried other forms of painting engines before? I'm asking because I wanna know what you think of Cameron Niemela's preferred method of Cerakote? Here's all the videos he's done on Cerakote: /user/hondaxrs85/search?query=Cerakote

@CafeRacerGarage 4 года назад

G D that stuff is very expensive so I haven’t looked into it for this build but it’s amazing stuff

@gctdonyre 4 года назад

@@CafeRacerGarage Sounds like a patreon goal right there.

@johnDukemaster 4 года назад

I have used Harley Davidsons wrinkle finish on spray cans and that's really good!

@mattduncan5500 3 года назад

no engine primer??? right to the paint

@CafeRacerGarage 3 года назад

I followed the instructions on the can to the tee. Hope that helps mate

@CafeRacerGarage 4 года назад

Wrinkle Paint amzn.to/2Y7pCPd Sandblasting Gun amzn.to/2UuRkUH Glass Bead amzn.to/34Dlwk9 How I Made the Sandblasting Cabinet Video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sWvz4Y3MTeQ.html ALL PARTS AND TOOLS I USE: www.amazon.com/shop/caferacergarage Music I use, TRY IT FOR FREE bit.ly/2OR9jRq - AMAZING for RU-vidrs