i have this kind of multimeter 18 years ago and it still working can count how many times i drop it so its very tought multimeter but if were talking about accuracy its not accurate as digital multimeter but one thing this analog multimeter can do much better than digital meter is component leakage test so if your in electronic repair this multimeter is still very handy.
Hi Darren, 🎉 Congrats on over 5K subs! I came across your channel & mark my words, this is your year to make it even bigger on RU-vid. I'm continuing to watch your journey & can't wait to see your newest videos suggested by the platform. Live your bess life, Brad J Success 🙌
I think that the capacitance scale of this meter is misleading. When performing short compensation, the pointer should be aligned to 0 Ohm not 10uF. Because the measurement circuit of capacitance range is shared with x100kOhm range. I'm sorry if I'm wrong.
It is a very nice multimeter, especially for beginners: compact, easy to carry and protect. This model is manufactured in Japan but there are many Chinese clones of it, such as the "Sunwa" branded ones that can also be found in Europe. I have used such a cheap knockoff model and it seems a quite nice design. Apart from the choice of components, materials and probes, and the potentially reduced accuracy due to mediocre calibration, I guess it is mostly the same. The only major shortcomings typical for such designs is the lack of a high DC current measuring capability and the absence of any visual or sound indication for the continuity test.
Sanwa has been producing the YX360TR since the mid-80s and its longevity is the reason its a bestseller. Most electricians and technicians in Asia have used this Sanwa at least one time in their careers and was the go-to VOM before the arrival of cheap DMMs. Nice to know Sanwa still makes this VOM but if you prefer an analog meter, there are a lot of cheaper copies available (any one care for a Sunwa?)
You can use cont. feature with ohms range with x1 or x10 if the needle goes fully to right side to '0' it is full cont. '0' as we see in our digital multimeters. There is no buzzer though but you can find buzzer in some analog multimeters.
Analog meters usually are most accurate when laid flat on their backs. The 18 ohm resistor is the Rx1 resistor. If you look at the middle of the dial scale on Rx1 you'll see that the middle of the scale is close to 18 ohms. Kind of a dead giveaway. The wonkiness on capacitance is just that the caps under test still had a charge from the previous test. As the needle moves to the left the cap is charging not discharging.
As I pointed 👉 out previously for technical reasons it's much easier to have the display at an angle for filming. However, after testing 5 resistors of various (Ω)values, I can say the result was negligible to non-existent. There was no discernable difference in the measurement readings whether the meter was completely flat on a surface or at its standard angle of support. The frictionless Taut-Band suspension mechanism means the bands are permanently anchored to the moving element of the instrument and to U-shaped springs that maintain proper band tension. It's inherently more accurate and less prone to false readings based on the meter placement.
🤣A bit of nostalgia coming to mind. Thinking of those old English AVO's from my school days. If I ever got one of these it would be for the novelty value.
About CAPACITANCE, sorry, but you did not tested them ok: (1) Analog short should be Zeroed at 0 Ohm, not 10uF. (2) Capacitor be 100% discharged before new reading. (3) Reading is the Peak value. The smaller the capacitance, the faster and more challenging it becomes.
@@KeepOnTesting yea over a yrs til now and im still using sanwa analog but try to use some high in digital multmiter but not for now need to save money to buy one but i have a very cheap creston but still ok im contented for what i have aslong ny work is good with my bro sanwa yx360trf
Today received cheap pocket multimeter from aliexpress (Darren, remember i said i will buy AN303? I canceled order cause they don't have it at russian warehouse, delivery from China will take 1-2 month). That' Victor VC921 (3 days delivery). And he has absolutely same "parking system" of probes. Not very useble, but very compact. Good cheap multimeter. Sad no current measurement, but it's easy to make with external probes with shunt like 0.01 Ohm.
Great stuff Dmitriy! Yes the Victor is a great little pocket meter, same storage assembly as th SANWA YX360TRF as you mentioned. Current would've been nice but your hack will work just fine.
I'm not an expert. But i've heard some technicians prefers testing small SMD diode or capacitor leakage with analogic MM. More sensitivity or ease of use ?
MORE THAN 10 YRS I AM USING UNFORUNATELY MOVEMENT COIL JAMED ,OUT SIDE MARKET NOT AVAIABLE THIS COIL REALLY I LOVE THIS METER IF POSSIBLE ANY HAVE TO GET COIL PLZ HELP
Looks to me like a generic design with sanwa printed on it.. I have one exactly the same under a different brand! You gotta love that moving coil meter tho..like a trip back 1955.."mcfly I thought I told you never to come in here!" Where's my skate board?
Eu ia comprar ,mas depois que vi seu video desistir .Estou decepcionado com essa marca e olha que eles são caros .Sou brasileiro,imagine... escapei dessa furada. Os seus videos são muito bons e ajudam muita gente pelo esse MUNDO.Eu uso a legenda pra eu entender seu video e eu entendo algumas palavras como por exemplo [ o livro está na mesa 😜😜😊😊😄]
My Father bought one for me in 2005 and Im still using this until now. The biggest cons is the test leads are non removable but overall this is accurate and one of the best analog multimeter. But now I want to retire this and buy a auto ranging digital one for easy reading. RIP Dad...Thanks!
I own one, havent had issues on capacitance, I think you havent discharge the capacitor sufficiently so the readings gone bonkers, correct me if Im wrong
Thanks for the feedback...I've tried many times since and it's extremely sporadic.. I have discharged the caps with no success. I'm still investigating and I'll report back with an update if I can find the issue.
About accuracy: ANALOG MultiMeters are accurate when galvanometer is absolutely in HORIZONTAL position. Some can say the coil and springs and counterweights are “balanced” (and could be), but friction-wise it is not. I have a nice Analog MM (30KR/V and 30uA sensitivity) purchased in 1986 and its best precision for a non full-scale reading is ONLY achieved when 100% horizontal, when voltage readings are at “digitally-Ok” per their usual uncertainty (2% typical). However, if INCLINED (Sanwa) or VERTICAL (Triplett) errors appear much worse.
That's a cool looking analog meter. But man, am I glad we have digital now. These analog graphs weren't made for people with bad eyesight. It's like an eye testing chart. "Can you see an hfe bar? Good, you have 20/20. Next, please." And that intro music (00:06 - 01:04) was driving me insane. I had to pause the video several times to see who's clicking their mouse like a maniac. Click-click-click-click. 😄 In all seriousness, even though nothing particularly caught my attention, I enjoyed this Sanwa week. It's like a regular presentation but with no marketing whatsoever. 👍
Lol..sorry, I guess it does resemble a mouse click gone horribly wrong..🤣 Those analog displays can be tedious at times agreed, especially if you're in a hurry.. I'm glad the SANWA WEEK was enjoyable 😉 and happy to hear that I'm keeping it real. Hopefully the next installment will have a happier ending 🙏
wow! incredible . but I have the same sanwa multimeter which is very clear and finishing is also good. I have the pictures of the circuit, I will shere with u f u want.
Hey i just discovered your channel and i really like it! I’m going to start as an electrician soon in Belgium and need a very good multimeter that is user friendly and sturdy. Which one do you consider me to buy? Btw you got a new subscriber, keep it up!
Hi Mehmet! Welcome...I can heartily reccommend the UNI-T UT191T, it's IP65 weather rated, robust input protection 👍 and super accurate with a terrific form factor. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P8bw9j80x5g.html
@@KeepOnTesting allright i’ll get that multimeter thank you! A last question is whether i should buy another (secondary) multimeter too with NCV or not? Do you think it’s an useful function to have or isn’t it that good?
@@mehmetaksoy6773 I think it's a great 💡idea! The UNI-T UT118B is a super small/handy pen meter that does continuity too! Highly recommend! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tzG8xhDYsE0.html Also the new Aneng A3008 which I'll be reviewing next month looks solid! | ANENG A3008 a.aliexpress.com/_mMfx8vz
@@KeepOnTesting allright i’ll be waiting on the review! Don’t forget to compare the ncv function of the uni-t to the ncv funtion of the aneng. That would be interesting 😁
@@KeepOnTesting Great! i own both yx360trf which is 15 years old now and yx-361tr. also... that "long filament" you pointed out is the on board leaf switch. it disconnects when the meter is in off position and connects in all ranges. i made a schematic diagram for the yx360trf fell free to look from the link below. cheers from philippines. drive.google.com/drive/mobile/folders/1xKLQMyg3cr72cIfpXDZ4pkSMGkJfGsGt
@@pan1fox Good choice, i also own one. bought last week actually. it's the successor to the famous yx360tr, i also made a hfe adapter to fit both yx360trf and yx-361tr. i find it useful to spot a substandard transistors from china. here in philippines chinese made transistors are everywhere.
Too bad, just not seeing $100 here, why spend a hundred bucks on an outdated analog meter when you can buy a pretty decent digital for the same money thats far less hassle to use. Maybe they still have a place in some areas but most folks would rather have digital.
I expect better quality from a product with "Made in japan" written on it. The soldering job on the board looks awful. On another note. I bought an analog multimeter few years back. I do not think I have ever used it. I am curious if other viewers are actually using their analog meters, and if so, for what task do they prefer them, over a good quality digital meter.
I came here because my slightly used Sanwa YX360TRF with fresh new batteries won't zero the resistance. Needle just moved a little, but cannot zero-in despite all adjuster help. I tried to open-up, and measure component parts using my Fluke 17B+ DMM. The only thing that I noticed is one of the diode has 0v in reverse measure, whereas the other diodes have 0.95v/0.5v. I am not sure if that odd one is a diode or something else, but it gave 0v in one direction. Could that be the culprit??
@@KeepOnTesting The YXTRF360TRF is fixed now, by install new batteries. But my other one YX360TRe is not. Cannot zero ohms. Here is the picture drive.google.com/drive/folders/1zRkhdHk0iu-kRXL_B6U7-ol6n3AmYyYi . I suspect brown C2 i cannot get a reading of it. It is marked "F 473Z". I cannot find schematic of this model. I tried to measure R values using my other Fluke 17B+ DMM and here are my readings gist.github.com/typelogic/0ccd379023bfa87ab6887ba92db10586
Now let they old man speak, you always put a analog meter on its back for acurat mesurment, gravety coms to play, for capasitant you have to dischards de cap with every mesurment you take.
Thx George..I hear ya..Unfortunately it's rather difficult to do the technical deed video wise with the meter flat 😀 but great point nonetheless. I did discharge the capacitors frequently but it didn't make much of a difference overall 😳 👍
Me, staring at the exact meter right beside me: "don't worry, you have a place here" But seriously, the reason why I have this is for my class requirement back in high schools days. It did what its supposed to do(complying the requirements) but after that class, it became a disappointment day by day. I am still using it right now for my hobby til I can get a dmm. After that, this will become a "handy-to-have" meter. And yes I did teardown this meter and was not disappointed by the soldering job but the flux did. Until this review came in and with my standards change from long ago, I am pretty disappointed considering the price for this meter.
Thx for the story...I guess alot of these meters were par for the course back in the day! I agree, it's still disappointing to see a Japanese meter with these shortcomings. Maybe it's time they had a wake up call and get back ontrack. 🤔 Suffice to say I believe in the SANWA brand, I truly believe they put out some of the best electronics instruments out there. However, when they fail to deliver its important that we let them know about it. Made in Japan should always be considered some of the best in the world.
I can tell that you wanted this MM to succeed but it just does not deliver. The sounds you make when you are disappointed by its features are pretty obvious. I feel bad myself for this unit since it's from Sanwa. I thought this one had a Cheap-o title but I'm mistaken. I'm pretty sure it has the same parts as my dad's cheap analog MM from China that he bought for about $8 here in the Philippines which has a buzzer and an LED light for continuity. Had to replace the wires inside because they used cheap ones and they oxidized after a year.
I was really hoping this Analog meter was going to impress but as you say, it didn't turn out that way. I really wish SANWA did as good a job internally as they did externally on the YX360TRF. Glad to hear you repaired your multimeter.. price is irrelevant as long as it performs well that's the most important part! 😀👍
for low impedance measurements that's one, and with that taut band suspension it can withstand even 20 meter drops, for peaking and tuning circuits, and observing fluctuations. your 7 dollar meter ain't capable of such. iknow cause we use a similar sanwa meter
for low impedance measurements that's one, and with that taut band suspension it can withstand even 20 meter drops, for peaking and tuning circuits, and observing fluctuations. your 7 dollar meter ain't capable of such. iknow cause we use a similar sanwa meter
for low impedance measurements that's one, and with that taut band suspension it can withstand even 20 meter drops, for peaking and tuning circuits, and observing fluctuations. your 7 dollar meter ain't capable of such. iknow cause we use a similar sanwa meter
for low impedance measurements that's one, and with that taut band suspension it can withstand even 20 meter drops, for peaking and tuning circuits, and observing fluctuations. your 7 dollar meter ain't capable of such. iknow cause we use a similar sanwa meter
@@KeepOnTesting thank you i will In the future i will post a video about a number of modifications that you have made that will greatly increase the capabilities of the device. I hope you like it
@@circuitblog01 ahhh..my bad sorry. Thought you had a Ukrainian accent..🙄 email me: Netplicity1@gmail.com , if you get a chance. Perhaps we can discuss a few ideas 💡 👍
I wouldn't say it's that bad. It is well made and definitely a step up in the Analog meter realm. However, it did disappoint and at this price range I think Sanwa can make a few improvements that would make it a much better overall meter.
@@KeepOnTesting 100 buck, no 30-40 would be more like it, there’s nothing in there where did they spend the money. The meter itself is fine the price is not.
