SATISFYING TIMELAPSE Subaru Swapped Porsche - From Bare Metal to SEMA car in 1 Year!

Rennch - Porsche 911 Restoration and DIY Tips

Подписаться 32 тыс.

Просмотров 30 тыс.

50% 1

Time Lapse Porsche Restoration for 2022! So, I'm a single dude in a garage, building this crazyballs Porsche 911 Restoration with a Subaru EZ30R Twin Turbo engine. After 3 years, the body work is pretty much complete. This video encapsulates January 2022 until December 2022. Hope you enjoy!
****************************
Follow rennch on Instagram for pics from events like Rennsport, Luftgekuhlt, Monterey Car Week, and more:
/ _rennch_
rennch has some really cool products coming out soon. Jump on our mailing list and be one of the cool kids that gets to check them out first:
rennch.com
Watch my Smoking Tire Episode with Matt Farah:
rennch.com/tstv...
Or…listen to the podcast version:
rennch.com/thes...
I’m “emptyo” on Pelican. Check out my entire build of “The Grey Ghost” from rusty heap to curvy beast:
rennch.com/grey...
This is a Porsche 911 restoration that was abandoned in 1994 after being converted to a race car. My plan is a twin turbo Subaru EZ30 porsche engine swap with 400+ HP to the wheels. Stay tuned.

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 89

@william3-31drills7 Год назад

Great job man, now get her fired up......

@Pammepoodle 5 месяцев назад

Beautiful Subarporsche 😉excellent work . Also love your dog 🐶 🥰

@stephengaffney2068 Год назад

Hi I’ve been watching home build by Jeff for some years now and he happened to mention your channel and I’ve now watched all of your videos and I must say I’ve enjoyed watching can’t wait to see this car done looks amazing

@hieroglyph321 Год назад

If that's blasphemy ... then forgive me Lord for I have sinned .... what a fantastic job!!!....... The 'wanna go for a ride in my porch' has killed me twice now. Nice one 😀😅

@edhunziker2262 Год назад

7:15 brings back memories of the complete conversion of my 73 914 to a 2003 WRX. Fun stuff.

@rennch. Год назад

What did you do for cooling and a radiator or expansion tank?

@robertrishel3685 Год назад

This is the stuff dreams are made of, truly! When I close my eyes and consider perfection, it’s your pair of 911’s😍😍😍😍😍😍. Fortunate bastard!!

@rennch. Год назад

Thanks brudda.

@alastairwatson3201 Год назад

Nice gateway drug, bloke! Now I’m hooked and will feed my addiction from Episode 1 onwards.

@tonysoprano4923 Год назад

You can't do something like that in a simple garage and in the garden! I'm freaking out! A guy like you must get a series on TV. When I consider what DIY nerds with comparatively ridiculous projects have significantly more reach, your channel should hopefully explode with likes soon. Wish you much success.

@butterfliesandtape Год назад

Incredible work on those arches son! That paint job and colour is SIIIIIIIIIIIICK!!! PROPS.

@rennch. Год назад

Thank you! Cheers!

@allthegear.noidea Год назад

The rotisserie cage was perhaps one of the coolest things I've seen on a car build channel.

@martinsmackes9350 Год назад

Most iconic car ever !

@MrJeddurso Год назад

Can't wait to hear those Subie tones coming out of the "Porsche". Looking great!

@rennch. Год назад

If that’s the case, you may be slightly disappointed.

@StevieBzz Год назад

Watched every vid, and you have done a great job. What a great year to come. Lots of love from across the waves Tenerife Canary Islands 😍🤩

@rennch. Год назад

Thank you! You too!

@OddJobFix Год назад

That made the year seem like a lot more, or a lot longer than for most.

@eddiecruz6618 Год назад

Wow! Amazing Build. Can’t believe you’re not at 100k subs. Great Videos. Can’t wait for the next.

@bobbywarrior1434 Год назад

That bodywork and paint look amazing , congrats

@donndabney683 Год назад

Another great video, Michael! It's been inspirational to say the least watching you go through so many struggles in solving so many problems continuously. Time for me to drop by for another in-person look-see, brother! Keep up the great work, looking forward to my first ride in the amazing blasphemy build! 😎👏

@rennch. Год назад

Thanks homie!

@ianazariah Год назад

love this channel! it was you who insired me to put up a timelapse of my build first and boy did it slap. one day I dream of making a porsche build

@rennch. Год назад

Sick!! Link it up!

@ianazariah Год назад

@@rennch. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zuOv6s8YJes.html there she be

@davidklauer3422 Год назад

Excellent Hope to see it next year at SEMA since I missed it last November

@stephengirling7859 Год назад

Mean green dream machine! Awesome! Just subbed! Builder Creator sent me.

@IehovaIre Год назад

I waited so long for your build. It came out BEAUTIFUL. I am impressed. Keep up the good work 🙂🙂🙂

@rennch. Год назад

Thank you sir!

@MrJearley6 Год назад

Thank you for this video!!! I learned a lot!! This is your Subsciber on the West Coast Los Angeles!!!

@paulwalsh6980 Год назад

So amazing to see how far this has come….. you must be super proud. Great build and great vids. Here’s to a finish in 2023!

@roberto-pz2hs Год назад

Wow, bellissima macchina , questa e la mcchina dei mie sogni ! Complimenti bravissimo ottimo lavoro

@peterpumkineater6872 3 месяца назад

Good job, your skills are envoyious 🎉

@apartment777 Год назад

Beautiful.

@alecjones7299 8 месяцев назад

Super interesting thank you for all your work

@heiligerm Год назад

So many nice ideas on this car, fine details and endless work Michael

@rennch. Год назад

Much appreciated!

@sword7786 Год назад

Absolutely great to see, so looking forward to more content! You've come a long way from the Aircon refit!😊

@bimotahb1 Год назад

When mig welding sheetmetal make sure you gaps are exact and the width of the thickness of the metal. Don't use magnets to hold part use panel clamps. Take a spare piece of metal and without looking at controls pull trigger and wait for constant bacon hiss. Than raise heat or lower feed so you are right at the verge of burn through. A 1/2 weld is better than a spot as your warping anyway. Blast the spot with air after each weld to cool. Problem is when you do as you show all your doing is putting weld 75% at best above metal. Then you grind it all away leaving a very weak weld where you can get cracks or ghosting. Plus you will grind a lot less. Looks great!!!!

@OddJobFix Год назад

We all have our various favored ways of doing panel welding. I'm not sure your 75% assessment is accurate. I've done it all ways and TIG is very good but so is silicone bronze done with oxy/fuel brazing. It works with TIG as well but it's tricky enough with a flame. The main thing with all metalwork - less is more. So as far as grinding goes, I agree. I don't cool with air though. A nice cold dolly on the backside and a few taps go a long way to not over-stress the joint.

@bimotahb1 Год назад

@@OddJobFix Your a welder and u think he has more than 75% on that gas cap? Silicone bronze on a finished panel? Thats TIG or gas brazing do to melting point.. You can't work a MIG joint that is the issue. MIG welds cant be planished. You have to cool as no other way to prevent excessive heat and no way to hammer dolly weld. Cold dolly? Read what I wrote the idea is to get more heat into the panel to sink that weld and get 75% penetration so you can grind which with mig is all u can do. Look at the lack of penetration from no heat spot welds. MIG welds crack from grinding and trying to work. Brittle! Repair will ghost. TIG or gas it isn't the process its the ability to planish and work the panel after.

@rennch. Год назад

You missed the “rhetorical“ part.

@OddJobFix Год назад

@@bimotahb1 Tell me more about planishing MIG. You use ER70S-2 or 6? I'm not interested in what process you use. Unless you want to compare heat zones.

@OddJobFix Год назад

@@bimotahb1 Here ya go, bud. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dvnyIvKeDDk.html

@lloyd1267 Год назад

Great job! You make it look all so easy, but I know its a hard, time consuming job. I hope I'll be able to see the car up close, live some day. You rock!

@pamacleod Год назад

Awesome recap Michael 👍🙂 doesn’t the rotisserie seem like eons ago ! 😂

@dougsisk6780 Год назад

Super cool project!!

@kaddleman4294 Год назад

Great job! great project! good luck with the challenges of a Subaru powerplant.

@rennch. Год назад

Fingers crossed!

@danmurphy5660 Год назад

Well done man, I've followed this build for a while and love where it is headed. Even though it's sacrilege and just like Mike Burrough's Ferrari, it's the good kind of sacrilege that makes a classic into something so much more and I'm glad you are building it.

@prothewful Год назад

Can you do a sound clip of your 993 engine car please?

@davidgray5583 Год назад

Progress incredible and build quality amazing. Your dedication to get this done is admirable. Heck. I may even buy a hat to support this build :-)

@scottmcclintock3942 Год назад

I have enjoyed every minute. Is there a cali event you can bring it to???

@martindahl9803 Год назад

So good!

@yjmsrv Год назад

Really looking forward to the next few months with the engine component getting wrapped up- that's what brought me to this build in the first place- always through an ez30 flat six was a great swap choice for this- glad someone is finally doing it! Twin Turbos just makes it more WRX-like but the flat 6 layout is oh-so-Porsche.

@claudiolebandit9408 Год назад

You deserve so much more subscriber man. Keep on building.... Great job

@rennch. Год назад

I appreciate it!

@tomgardner6294 Год назад

I really like the dash setup, the color contrast is nice. Amazing progress this year. Well done!

@gallantpawn Год назад

Great video!!!

@butterfliesandtape Год назад

Mike, it's soooooo exciting to watch any new episode you post as you draw closer to the finish line and pass through your different stages. I'm super stoked about the upcoming work you're gonna get going on. I too own an EZ30, still in my Outback, which will eventually go into something else along with a Subaru 5MT I have here somewhere. Get on it, son!!! And thank you for being as crazy (crazier?) As all us restomod/JDM hacker addicts. Cheers from that other Mike in Catalunya x

@maxs1000rr 7 месяцев назад

Awesome

@DrewNZ Год назад

Those slick headers right into the turbos is fantastic work. Would love to see more of the turbos into throttle body etc. Love the EZ30 as a mod platform. Running Raptor Headers and SC on mine. She pulls haha happy NY from New Zealand.

@tuck1760 7 месяцев назад

you are an incredible human being! teach me your way, please!

@rennch. 7 месяцев назад

Wow, thank you!🙏🏻

@hayrettin39 Месяц назад

You're a genius

@michaelanderson3771 Год назад

Happy New Year Michael The car looks mint That Olive is starting to grow on me as you add the chrome bright work. How did you go with your wheels and what final colour for the rims?

@rossthompson4990 Год назад

This car will run on the tears of Porsche purists, I love it.

@akewahlberg5258 Год назад

Hi Mike, I hope 2023 also will be a greate year, looking forward to see/hear when you starting the engine. Question why the yellow dot on the side of the car ? Thanks from Stockholm coverd in 20 cm snow.

@Czochara84 Год назад

So much work iam sure it's way harder than it seems on video

@Enginuity Год назад

It’s amazing to see all that work condensed into one video. Hell of a job sir!

@rennch. Год назад

Much appreciated!

@chesspiece81 Год назад

I don't remember who suggested your channel, but I am so very glad I found it because this is an awesome build. What all did you do to the engine and what kind of power are you expecting to make and the final weight of it to be?