Тёмный

Save time with this Domino hack! 

sedgetool
Подписаться 28 тыс.
Просмотров 33 тыс.
50% 1

Sedge shows us a time saving handle hack for the DOMINO DF 500 from Festool.
Be Positive and Stay Sharp....WICKED Sharp !!!!
#Domino #festool #howto
Domino DF500 : amzn.to/3WwmUTn
Adjustable handles: bit.ly/DOMINO_...
Torx T15: amzn.to/3fDy45G
No. 2 Posidriv: amzn.to/3BUWDlO
www.mcmaster.com/
Affiliate for :
TSO Products : tsoproducts.co...
Kaizen Source : www.avantlink....
Taylor ToolWorks : lddy.no/1eoy5
Forged 3D : forg3d.store/s...
DISCLAIMER - As an Amazon Associate I earn from qualifying purchases.
Chris’s AV Gear:
Panasonic 4K Ultra HD : amzn.to/3pXXPzX
DJI OSMO : amzn.to/4bYRiKK
Rode Video Mic GO : amzn.to/3vXOJqx
Rode Wireless Go 2 Mic : amzn.to/45aodZt
Sony MDR7506 Headphones : amzn.to/3I450g5
SanDisk 256 GB Extreme Pro SD Card : amzn.to/3i0iT4u
SandDisk 128 Micro SD : amzn.to/3zeJab3
Follow Us on the social media platforms :
Website: www.sedgetool....
--------
Instagram: www.instagram.....
--------
Facebook: / sedgetool
--------
Tik Tok: www.tiktok.com....
_ _ _ _ _ _ _ _ _
Green Suiters Podcast: podcasts.apple....
SedgeTool is all about woodworking and having a great time doing it. SedgeTool is Brian “Sedge” Sedgeley who brings 30 years of woodworking experience and tons of energy to the team. Chris "THE UNIT" Seibert who films it all! If you want to have a good time and learn something about woodworking, then you’ve come to the right place.
All views and opinions expressed during SedgeTool are explicitly those of SedgeTool. They are not intended to represent any claims, value statements, or opinions of any of the tools, brands, subsidiaries, or parent companies of brands referenced, visible, or mentioned on the show. The SedgeTool team is here for entertainment and educational purposes only. SedgeTool is not a replacement for proper training or safety guidelines as outlined by the manufacturer's owner’s manuals.

Опубликовано:

 

7 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 183   
@toolchuck
@toolchuck Месяц назад
Hey Sedge, I did this upgrade and it works great. I also applied the same upgrade to my KPEX extension legs to replace the knobs and it worked awesome. All the best, Chuck
@sedgetool
@sedgetool Месяц назад
Thanks for the info! I think I might try that on my extensions !!
@bobh64
@bobh64 Год назад
Finally got to do this. Stands out and simpler to use.
@sedgetool
@sedgetool Год назад
👍
@benzam6218
@benzam6218 Год назад
Awesome! Thank you! I had taken the screw out and just used the lever as a tool to tighten things down. I'm shocked I haven't lost it yet, but that method has gotten old and wanted the same style of levers that is on my DF750! You probably saved me an hour of trying to find a good adjustable-position lever handle.
@sedgetool
@sedgetool Год назад
Glad you watched !!!!
@warrensmith2902
@warrensmith2902 Год назад
Wicked GOOOOOood. What??? No Festool Pozi screw driver??? I am shocked!!!🤣🤣🤣 It's great to get "the rest of story" at home with Sedge.
@sedgetool
@sedgetool Год назад
Thanks Warren !!!!!!🤙
@TheMixmastamike1000
@TheMixmastamike1000 Месяц назад
I did this because I watched this video a year ago, and couldn’t be happier with the mod. Thanks.
@sedgetool
@sedgetool Месяц назад
Glad it helped !!!!
@stevethigpen3166
@stevethigpen3166 Год назад
First time I used my Domino for a long run, I didn't k now about drift. It happened but I was able to save the piece. Just did the upgrade with the locking knobs you suggested. Just used it for the first time. Perfect alignment!! I will still check the settings every few mortises. Thanks so much.
@sedgetool
@sedgetool Год назад
Glad I could help
@CraigularjJoeWoodworks
@CraigularjJoeWoodworks Год назад
Atlas shirt for the win.
@sedgetool
@sedgetool Год назад
For Sure !!!!!!!!!!!!!! Atlas Rules !!!
@grantman1148
@grantman1148 Год назад
Love this. Just ordered two!
@sedgetool
@sedgetool Год назад
cool
@kellychurchill808
@kellychurchill808 6 месяцев назад
Awesome Idea! McMaster Carr had them on my door step today (ordered Monday morning) and had them installed in less than 5 minutes (was not timing, but they went very quick)
@sedgetool
@sedgetool 6 месяцев назад
Great to hear!
@joshuabray37
@joshuabray37 Год назад
THANK YOU for this video! I’m glad I watched this yesterday… I used my domino today for the first time and had this issue (fence creep). Luckily, since I saw this video I knew what was happening…. I just ordered the screws and handles.
@sedgetool
@sedgetool Год назад
cool
@erickdanielsson6710
@erickdanielsson6710 Месяц назад
Thanks Sedge for two tips, Replacing the Adjuster levers, and McMaster's web site.!
@sedgetool
@sedgetool Месяц назад
Glad to help !!!!!!
@kennylakits4093
@kennylakits4093 Год назад
Yep, perfect fix. I also saw a guy used a light dab of gripper paste on the ways! I like your solution a lot. Love McMaster Carr
@sedgetool
@sedgetool Год назад
Cool, thanks!
@Trickmanii
@Trickmanii Год назад
Worked perfect...took just a few minutes to install. Recently made a jewelry box with the domino and found that it was harder to adjust. Added these for the next project with the smaller dominos.
@sedgetool
@sedgetool Год назад
cool
@Jimwho77
@Jimwho77 Год назад
Thank you so much. I have the “ original” 500 with the pins and have looked for a solution to the levers for years. Wicked great video.
@sedgetool
@sedgetool Год назад
WICKED cool !!!!! Thanks Jim
@barriowoodworks
@barriowoodworks Год назад
Man, how cool is this! Thanks, Sedge!
@sedgetool
@sedgetool Год назад
thanks...
@ApexWoodworks
@ApexWoodworks 6 месяцев назад
Sedge, great suggestion to swap out the two locking levers. One important point that you should mention is the correct way to stabilize the fence (the thing you call the plate...) prior to tightening the locking lever. That is, once you've set the thickness gauge to the desired setting (let's say 20mm for example), firmly press down on the top of the left-hand side of the fence to keep it resting firmly on the 20mm detent. While keeping the pressure on that side, go ahead and tighten the fence height locking level. If you put pressure on the right-hand side (the one that the locking lever is on), that side will most likely end out being lower than the opposite side when you lock down the fence. That'll most certainly result in skewed mortises.
@sedgetool
@sedgetool 6 месяцев назад
ok
@ivanrodriguez346
@ivanrodriguez346 Год назад
Cambridge MA here the accent I think your from Massachusetts? Thanks for sharing!!!
@sedgetool
@sedgetool Год назад
I am from Lewiston,Maine originally...been away for 38 years ...can't get rid of he accent... go figure...lived in Ft.Lauderdale for 25 years before moving to Indiana ...
@saterialewoodworking
@saterialewoodworking Год назад
Awesome hack Sedge thanks for sharing it .
@sedgetool
@sedgetool Год назад
Any time!
@olafbigandglad
@olafbigandglad Год назад
Ha! Nice Atlas shirt. I bought my first tool from them in 1986.
@sedgetool
@sedgetool Год назад
Atlas ROCKS !!!!!
@907jl
@907jl 3 месяца назад
Great idea, thanks!
@sedgetool
@sedgetool 3 месяца назад
You bet!
@aghelerter
@aghelerter 7 месяцев назад
Love this upgrade, a big thanks to you and Big D!
@sedgetool
@sedgetool 7 месяцев назад
You bet
@charleselkins4546
@charleselkins4546 Год назад
Love your Festool hacks. Thanks.
@sedgetool
@sedgetool Год назад
Thank you
@johnnyvsx
@johnnyvsx Год назад
Wonderful solution. I was hesitating to make the purchase.
@sedgetool
@sedgetool Год назад
Glad I could help
@AnthonyScolaro1
@AnthonyScolaro1 Год назад
Awesome Sedge, just ordered them. I had repositioned the original knobs last year, exactly the way you showed in the beginning. A month ago I had some drift and thank God I caught it after just one mortise😅
@sedgetool
@sedgetool Год назад
WICKED AWESOME !!!!!!!!!
@milandjordjevic5949
@milandjordjevic5949 Год назад
Sedge Thank You for this Tip 👍
@sedgetool
@sedgetool Год назад
Happy to help!
@johnkurtinecz5774
@johnkurtinecz5774 Год назад
Thanks Sedge, just ordered a set, looking forward to doing this mod!
@sedgetool
@sedgetool Год назад
Great!
@mrstuartrobertson
@mrstuartrobertson Год назад
and for those who want to do a similar mod for their OF1400 router I bought the following from berger tools GN300.1-30-M6-12-SW, handle length 30mm M6 thread and 1.2cm long. Works well too
@sedgetool
@sedgetool Год назад
cool
@mrstuartrobertson
@mrstuartrobertson Год назад
@@sedgetool you have me going through all my tools now to see what else I can modify ;-)
@KAYAKN
@KAYAKN Год назад
Thank you sir, ordered.
@sedgetool
@sedgetool Год назад
Great!
@MechmanGetrieb
@MechmanGetrieb 10 месяцев назад
nice!
@sedgetool
@sedgetool 10 месяцев назад
Thanks!
@travisjessie4776
@travisjessie4776 Год назад
Game changer!
@sedgetool
@sedgetool Год назад
Thanks Travis !!!!!!!!!!!
@KitchenmakerCompany
@KitchenmakerCompany Год назад
Thank‘s Sedge👍🏻
@sedgetool
@sedgetool Год назад
you are welcome
@brokenleadwoodworks
@brokenleadwoodworks Год назад
Thanks for sharing Sedge. Just placed the order.
@sedgetool
@sedgetool Год назад
wicked cool !!!!!!!!!!!!
@MrGarethGreen
@MrGarethGreen Год назад
I don't even have a domino and enjoyed this vide. So nice to hear an American working in mm! The rest of the world thanks you!
@sedgetool
@sedgetool Год назад
Glad you enjoyed it!
@decraew
@decraew Год назад
Awesome! Until recently I didn’t know these knobs on the Domino are not always tight enough. I discovered the hard way when the plate moved during a job 😕
@sedgetool
@sedgetool Год назад
Glad I could help!
@decraew
@decraew Год назад
@@sedgetool only pity is… McM C doesn’t want to ship to the EU. Understandable, international trade is increasingly a headache.
@bigredracingdog466
@bigredracingdog466 Год назад
@@decraew I could relay it for you.
@seanhenry744
@seanhenry744 Год назад
Now I have to place another order! 😂
@sedgetool
@sedgetool Год назад
Wicked
@daveheckman9388
@daveheckman9388 Год назад
Great video Sedge
@sedgetool
@sedgetool Год назад
Thanks!
@janm.pietrzak
@janm.pietrzak 3 месяца назад
Thank you!!
@sedgetool
@sedgetool 3 месяца назад
No worries!
@rickbyno2401
@rickbyno2401 Год назад
Great video for sure.
@sedgetool
@sedgetool Год назад
Glad you enjoyed it
@mrgunn2726
@mrgunn2726 Год назад
I miss living an MA, no indian summer, no indian pudding, and I don't hear how wicked good that grinder is. LOL Great video.
@sedgetool
@sedgetool Год назад
Thanks Mr. Gunn...LOL !!!!!!!
@KyleHohn
@KyleHohn 10 месяцев назад
Just ordered. I believe the part number in the video is no longer available. I ordered: Zinc Adjustable-Position Handle with Corrosion-Resistant M5 x 0.8mm Threaded 25mm Long Stud, Black 60655K46
@sedgetool
@sedgetool 10 месяцев назад
cool ...Thanks
@hhanger1
@hhanger1 Год назад
Thanks, Sedge! Great tips. Just ordered two of them. I also like using the Domiplates but they won't work in the middle of a field.
@sedgetool
@sedgetool Год назад
Glad to help!
@richm9157
@richm9157 Год назад
Thanks Sedge ! My domino's gonna get some new Kipp handles .....
@sedgetool
@sedgetool Год назад
Right on!
@pctatc66
@pctatc66 Год назад
Ordered! Ty
@sedgetool
@sedgetool Год назад
Way cool !!!!!
@RWingoS7
@RWingoS7 Год назад
I just got these for my brand new Domino. I like the feel of them with the additional adjustment better than the originals. Also, Sedge, how could you use a non-Festool branded screw driver on your Domino?! Doesn't that void the warranty?! 😹😹😹😹😹
@sedgetool
@sedgetool Год назад
I didn't think of that...I need to up my game at home !!!😄
@jcrbuilds
@jcrbuilds Год назад
Great hack. I wanted some, but not paying $45 shipping to uk! Lol
@sedgetool
@sedgetool Год назад
whoops ... that's a lot of shipping.....
@jcrbuilds
@jcrbuilds Год назад
@@sedgetool I’ll see if I can find them in the uk- I’ll let you know if I do. Great too though
@FuzzyScaredyCat
@FuzzyScaredyCat 7 месяцев назад
Bristol levers in the UK
@sedgetool
@sedgetool 7 месяцев назад
cool
@-joe-674
@-joe-674 Год назад
Thank you. Installed the knobs from McMaster-Carr, the job was as easy as you demonstrated; a nice way to improve a useful product. The original screws had some black grease on them, would you recommend re-applying to the screws on new knobs?
@sedgetool
@sedgetool Год назад
you could ....I did not
@keithwwalker
@keithwwalker Год назад
Thanks @Sedgetool , the Cross Stop QA-DF 500/700 would really benefit from a similar hack as well, but instead of a male thread post, the 4mm posidrive threads into a brass post. The Cross Stop QA-DF 500/700 arm handles interfere with the pin stops at less than 110mm standoff distance. Anyone find something similar? The McMaster Carr posts don't go down to 4mm thread...
@sedgetool
@sedgetool Год назад
I would not recommend doing that on the cross stops..... way different design........
@keithwwalker
@keithwwalker 2 месяца назад
@@sedgetool It seems the pozidrive screws are locktite'ed into the brass. Would have to destroy the parts and source the brass posts to get an adjustable lever in there...
@Selkian
@Selkian 2 месяца назад
Was the drift issue resolved on the latest models? A good upgrade. As a new owner of the 500, I am binge watching to see how best to use this tool. It is crazy that as such an expensive tool requires several upgrades/accessories to get the best out of it 🤷🏽‍♂️
@sedgetool
@sedgetool 2 месяца назад
there really was no drift issue..at the beginning of the video I show how to eliminate the over torquing issue by adjusting the lever... I just like using the kips levers I show how to install..
@Selkian
@Selkian 2 месяца назад
@@sedgetool Thank you. I have found a supplier here in the UK at a reasonable cost. A worthwhile upgrade
@josephKEOarthur
@josephKEOarthur 2 месяца назад
WICKED EASY @!@@!!! ! ! !🎉
@sedgetool
@sedgetool 2 месяца назад
Rock on!
@florianb.4278
@florianb.4278 Год назад
Nice i also upgraded my DF500 years ago but im from germany and i never found such adjustable handles with the exact thread length so i orderd handles with inner thread and a threaded m5 rod and glued it in with Loctite.
@sedgetool
@sedgetool Год назад
Thanks for the info!
@decraew
@decraew Год назад
Would you mind sending the exact references of what you bought in Germany ? I’m in BE myself.
@Mike--K
@Mike--K Год назад
Thanks! I tried twice to include a source where European and UK residents can buy these, but the comments were deleted.
@sedgetool
@sedgetool Год назад
weird .... we are not deleting them at SedgeTool...make sure you hit the reply button
@Mike--K
@Mike--K Год назад
@@sedgetool I do, and I can see my replies where I posted them. However, when I refresh the screen, they are gone.
@Mike--K
@Mike--K Год назад
@@sedgetool It just happened again. I included the source and part number and could see my reply until I refreshed the screen.
@Mike--K
@Mike--K Год назад
@@sedgetool Let me try with just the name of the source, which is Norelem. They have offices in Germany and the UK.
@Mike--K
@Mike--K Год назад
@@sedgetool The YT issue appears to be with the part number. One last attempt for 06610dash50dash10586X25 (replace "dash" with "-").
@montyr14
@montyr14 Год назад
Thank you very much. I always complain about the height adjustment handle placement, this replacement handle will help a lot. One note though, your paper is showing 5101K621, the online catalog has 5101K62, is this the same part?
@saterialewoodworking
@saterialewoodworking Год назад
Make sure you're ordering the 25MM long stud - 25MM -30MM like in the drawing .
@sedgetool
@sedgetool Год назад
25mm stud is the critical measurement
@ncque
@ncque Год назад
Part number 5101K621 is not on the linked page. Use the catalog search feature to find the correct part. I just order the parts two minutes ago. Thanks for the upgrade!
@niccom1385
@niccom1385 Год назад
Could you use the parts from the 700 or is it different🤔
@sedgetool
@sedgetool Год назад
The XL parts are different
@garethfay7137
@garethfay7137 Год назад
Excellent application for Bristol levers. All the better cos bristols is rhyming slang here in the UK!
@sedgetool
@sedgetool Год назад
Good to know!
@garethfay7137
@garethfay7137 Год назад
@@sedgetool It's short for Bristol City, which rhymes with....
@mrstuartrobertson
@mrstuartrobertson Год назад
To all UK buyers, they contacted me and said that complying with export laws meant they could not ship to UK. I instead found something similar from BERGER TOOLS LTD. Got both GN300 and GN301 on the way to see which is best, but M5 with 25mm as sedge said.
@sedgetool
@sedgetool Год назад
cool
@mrstuartrobertson
@mrstuartrobertson Год назад
Yeah ordere two different lengths and found the perfect UK choice, berger tools £5.78 each the model GN300.1-30-M5-25-SW. Fits perfectly, only wish it came in green.
@yngndrw.
@yngndrw. Год назад
@@mrstuartrobertson Thank you!
@mrstuartrobertson
@mrstuartrobertson Год назад
@@yngndrw. Andrew hope you enjoy the mod as much as I do. Been using today and it is so much better.
@mountainlightwoodcraft
@mountainlightwoodcraft 7 месяцев назад
I just stumbled across this video and clicked on the link for the adjustable knobs for the 500. No matter how hard I look on the MC website, I cannot find those specific knobs. Can you please provide a current link?
@sedgetool
@sedgetool 7 месяцев назад
try this link. www.mcmaster.com/5101K5/
@garybadger325
@garybadger325 Год назад
Great hack, but why doesn't Festool carry the part? They made the change on the DF 700.
@sedgetool
@sedgetool Год назад
Thanks for watching
@almostalphas
@almostalphas 9 месяцев назад
Do you have a mcmaster part #? When I follow the link from the video description it just goes to the mcmaster home page.
@almostalphas
@almostalphas 9 месяцев назад
Found the answer a few posts down: 5101K62
@paultierney6595
@paultierney6595 Год назад
McMaster -Carr wont ship to uk as just got told and struggling to source the stud length of 25mm
@sedgetool
@sedgetool Год назад
sorry to hear that
@brettpeckinpaugh
@brettpeckinpaugh 18 дней назад
So far I cannot get the screws to come loosen on mine to remove the handles. Any ideas or tricks? I don't want to damage anything of course.
@sedgetool
@sedgetool 17 дней назад
A little WD-40 or PB Blaster on the screws and let it soak in..also make sure you use a #2 pozi drive tip tho loosen the screws...Hope this helps !!
@williamsmith9026
@williamsmith9026 Год назад
I am new to the domino and have not run into this issue yet. Is this something you would recommend doung to get out ahead of the issue before it rears its head?
@sedgetool
@sedgetool Год назад
I would wait until there is a situation.......
@sailrockpaperscissors8261
@sailrockpaperscissors8261 Год назад
great video , do you know if i can get these in the UK have googled the part number but no results for the uk thx
@sedgetool
@sedgetool Год назад
I do not know a source in the UK... so sorry
@sailrockpaperscissors8261
@sailrockpaperscissors8261 Год назад
@sedgetool thx I found a supplier Hope they fit. Are you going to do a review of the CSC 50 saw anytime ?
@SoCal_Derek
@SoCal_Derek 22 дня назад
Is there a link for these ?
@sedgetool
@sedgetool 21 день назад
This link will take you to the page bit.ly/DOMINO_knob
@KIIJJY6969
@KIIJJY6969 Год назад
are they the same size on the 700? I wanna order some green ones for that as well
@sedgetool
@sedgetool Год назад
the 700 already has spring loaded levers
@KIIJJY6969
@KIIJJY6969 Год назад
@@sedgetool I know. I just want green ones!
@Marcus_Caius
@Marcus_Caius Год назад
Any other source then Mc Master? They do not deliver that item in Canada :(
@sedgetool
@sedgetool Год назад
I only know of McMaster Carr ...sorry
@timothycalderwood5695
@timothycalderwood5695 Год назад
Hey Sedge, I need your help. Could you please give us the EXACT part number for the levers for the DF 500? I ordered P/N 5101K61 which is what I see in the video. However, the thread diameter is too small. Bummer! I did get next-day delivery which was fantastic, but I'm, so disappointed that it doesn't fit. I don't know if they will take them back, but I want to ensure I order the correct part next time. Thanks!
@sedgetool
@sedgetool Год назад
5101K62 6.36 Plastic Adjustable-Position Handle with M5 x 0.80 mm Threaded 25mm Long Stud Color Blue Green Red Yellow
@JLLG2
@JLLG2 7 месяцев назад
@@sedgetool Should pin this comment or put into description :) The URL in the description just opens a PDF catalog page with many parts.
@tundrawhisperer4821
@tundrawhisperer4821 Год назад
Hey Sedge, just curious about mine. I have a Domino 500 with a build date of 03/07; I have absolutely no play in mine. Will this come into play eventually with time or are some just susceptible to this issue, or is this an issue on newer models? Thank you for any response regarding this.
@sedgetool
@sedgetool Год назад
If it is working fine don’t mess with it
@tundrawhisperer4821
@tundrawhisperer4821 Год назад
@@sedgetool Got it, Thx
@geraldlalonde5992
@geraldlalonde5992 2 месяца назад
Why doesn’t Festool update it?
@sedgetool
@sedgetool 2 месяца назад
?????????????
@cygnusa3772
@cygnusa3772 Год назад
Are these the same on the 700?
@sedgetool
@sedgetool Год назад
the 700 already has the spring levers on it !!
@CanadianSmitty
@CanadianSmitty Год назад
Sorry, does this void my warranty?
@sedgetool
@sedgetool Год назад
I do not know
@mrklean0292
@mrklean0292 8 месяцев назад
Sedge can't say, but I would say, keep your original hardware, and if you have a problem with something other than the knobs, put the originals back on. Who would know that you switched the knobs other than you. The knobs, more than likely, would not be a problem with an electro-mechanical warranty problem.
@WasimBarri
@WasimBarri Год назад
Excellent video Sedge but ....... to all Australian's and probably New Zealanders, don't bother ordering. I tried to and they cancelled my order with some BS excuse about the cost of complying with export regulations despite allowing international orders. I have ordered many items from US companies this year without a problem. Any Aussies know of a company that sell equivalent products? EDIT ... North East Industrial Supplies in Melbourne have these in stock. installed them today and they work great.
@sedgetool
@sedgetool Год назад
Sorry to hear that John.....
@LukePighetti
@LukePighetti Год назад
Festool does a great job on engineering, but they have fallen to the biggest fallacy in product design. They believe that they get everything right the first time and never have to make changes. This is a great example of one of those changes. Another is how hard it is to remove the power cord from the track saws. Can barely get my hands in there.
@sedgetool
@sedgetool Год назад
OK
@LukePighetti
@LukePighetti Год назад
@@sedgetool Agree disagree?
@bw162
@bw162 5 месяцев назад
I wonder why Festool hasn’t made this terrible inexpensive change themselves?
@sedgetool
@sedgetool 5 месяцев назад
hmmmmmmm... do not know ...
@Kartvel
@Kartvel Год назад
Stop showing these tips - I keep ordering stuff 🙂
@WelshRabbit
@WelshRabbit Год назад
Yes, Sedge is bad for my budget (but he's a great asset in improving the quality and enjoyment of my woodworking).
@sedgetool
@sedgetool Год назад
Thanks !!!!!
@sedgetool
@sedgetool Год назад
Thanks !!!!
@christopher_hawn
@christopher_hawn Год назад
Dammit! I just did the same, despite shipping costing as much as the levers themselves!
@RWingoS7
@RWingoS7 Год назад
Yoooooo same problem here! 😹😹😹
@philipb867
@philipb867 Год назад
Where can I get these from in the UK?
@sedgetool
@sedgetool Год назад
I really do not know....
@mrstuartrobertson
@mrstuartrobertson Год назад
Philip see my post earlier.. bought UK versions and works perfectly
Далее
The Ultimate Domino Mystery Revealed!
12:21
Просмотров 15 тыс.
Domino secrets NO ONE tells you…
11:21
Просмотров 95 тыс.
Starman🫡
00:18
Просмотров 12 млн
Unlock The Mystery of The 4mm Domino !
4:31
Просмотров 37 тыс.
Over 20 Years of Tracksaw Tips and Tricks !!
13:32
Просмотров 34 тыс.
Wicked Easy Drawers !
19:21
Просмотров 60 тыс.
You're overthinking it
8:52
Просмотров 79 тыс.
Festool Domino (do this to stop common problems)👍
13:53
How to Use the Paddles on the Festool Domino
13:41
Просмотров 4,6 тыс.
How To Make Your Own Festool Dominos!
5:31
Просмотров 21 тыс.
I don’t know what Dewalt was thinking with this…
25:24
Starman🫡
00:18
Просмотров 12 млн