Scheppach Mitre Saw and stand 

I came looking for this comment as I thought exactly the same.

They have a lot to do with scheppach,scheppach makes tools for LIDL rebranded as Parkside. They are not the only ones,Parkside is just a brand,not a manufacturer.

@@sokantnevesti603 I see. Thanks

@@sokantnevesti603 I've seen a lot of parkside tools and the ones i've seen are garbage

Its ok but not accurate enough for fine work. I use it for framing and rough work now.

@@kellydavidscreen8644 thanks 👍 I wonder which is the best mitre saw for under £400

I would not buy another one. Its ok for first fix. I think I would rather save up and buy a Bosch or similar for my next one.

Saw is good and a nice to use on the stand. Its noisy due to a brushed motor. The blade did not last long at all. Laser can't be seen in the sunshine and the dust bag keep pulling the battery lid off the laser as you pull and push, electrical tape fixes this. Its not very accurate when cutting as it seem to pull the work piece about if its not fastened down, this would be solved with a wooden sacrificial fence attached to the ali one. It cut laminate flooring well, I've just used it to cut 53 packs of laminate for my gym walls and floors. Compared to my last chop saw the cut is huge. For the price its a good saw.

Hi Del, I've just put a 10mm spanner on the nut so i believe its an M6.

Excellent. Thanks. 👍🏻 I’ve bought this stand off eBay and the bolts are missing so this is super helpful. Thanks again.

Parkside belongs to LIDL. Scheppach is an autonomous manufacturer and uses also other discounters to distribute its tools.

@@mortality1987 Yeah but they did it worse for Lidl. Table saw from shippach has better work table quality than Parkside has (where metal parts are thinner version etc.) - so price is better for lidl

To be found in B&Q now.

Size of the blade

I spent an while setting it up and its good enough for coving. However I would not use it for fine mitres like on boxes, I use my tablesaw for that.

I would not recommend this saw as a ‘Finish’ saw. I have never cut aluminium with it. If a perfect cut is what you want you may need to spend money on a better saw.

Look at the guard on the back. Bevel is only in one direction, so it's a single bevel. Mitres both ways of course.

Hi, the model number is HM100LXU

@@kellydavidscreen8644 thank you buddy👍🤝🤝