www.scooterstreet.com.au In this video we explain how a manual and auto-choke works, and how to diagnose and repair an auto-choke failure on a scooter.
I just had an opportunity to test the choke on a 2 stroke, the power is AC and put out 4.6 volts. Ignition on no power, it is only powered when the enigne is running. Power supply when the stator rotates.
Hello, ive got a jetforce 50 with a 70cc malossi kit in, 8g rollers and leo vince clutch springs, uprated carb and a leo vince tt exhaust but i can only get about 45mph out of it, any advice. Thanks
It works on temperature and changes position based on the temp of the sensor inside the mechanism. The power adds heat so it can expand to closed position. It does not need power to retract, so we put it in the freezer to speed up the activation process.Did you watch the video?
Will it work with any carb? I have a honda Dio AF18 and the E choke has a faulty connection. One of these seems like a perfect replacement, especially for cold starting. Question though? How long do you usually let the choke stay on for the manual one?
Check the air filter, enough air flow? Check the fuel flow when cranking the engine, is the fuel flowing to the carby? Check for spark, is it Zapping Blue/white at least 10mm? Test compression and air leaks.@@Ace01010
Thanks for this very informative video! I have a new scooter under 400 km. It seems to run good but before starting it, I usually need to turn the throttle once and start it up. The rpm is only about 1,000 to 1,500 rpm's so I have to baby the throttle a few minutes (or it will stall out) until it starts ideling at around 2,000 to 2,500 rpm's and then it's fine. Do you think it could be the auto choke is not working?? Thank you
Check the choke for sure, also the cary may not be adjusted correctly and also you may have an air leak so check from the airbox to the manifold just to be sure. this should be done from the dealer at the workshop prior to delivery to customer so if you have an issue reach out to the selling Dealer👍
Are these auto chokes generally the same thing? I would like to convert my Peugeot Django 125 to a cable operated manual choke. Do you think yours would fit?
Hey man! Do you have any idea why my 50cc yamaha scooter runs so good when cold for like 2-4mins and then it starts to lose power and can barely go up a hill and atleast 50% off acceleration speed just disappears. The problem has worsened when summer came
hi mate i’ve been having problems with my moped recently. so i found out i had a split in my fuel line and i needed to fix that immediately, so i ended up replacing them and since then it started bogging out after half throttle and just seemed like it was struggling. i rode it for a few days after that and on thursday last week i was going home and it just randomly started sounding like a piece of metal in a washing machine, just grinding and jolting and struggling to run. i don’t know what’s wrong with it
@@scooterstreetau it’s hard to tell when it’s coming from since it only happens when i ride, but i think it’s coming from the cvt. i took it apart and noticed who ever owned it last, the plastic variator fan snapped and they never replaced it. it’s a piaggio zip 2t
@@scooterstreetau okay no worries i don’t know if it broke while i was riding it or if was like that a few months ago before i bought it, but what issues could it cause without having it?
Hey guys, im experiencing splutter/bog at 3/4 throttle, wondering what your thoughts would be. my set up: Piaggio zip euro2 50cc 2t Stage 6 exhaust MHR replica 70cc kit 5.5 gram rollers 82 main jet
You need to eliminate the possible cause. Do this by testing each system, Jet up to 98 and come down from there. Is the needle set to middle. You should only fit 1 part per time and tune to suit to avoid this. It will save dollars and hours of trouble shooting.
yes I did change one part at a time, however the splutter/bog has been pretty consistent. The clip was initially on the leanest top notch so I moved it to the middle which helped somewhat in the mid range but still the same issue from half throttle onwards@@scooterstreetau
Yes good addition to the troublesome choke. We remove the choke and have a special connection which connects it directly to a 12v battery, you can visually see the choke extend into the OFF position. Or the freezer to have it retract.
hello, i have a "small" problem. recently i gave my scooter a bit of a makeover, put a new exhaust on, rejet, new rollers and springs. but now when i use the throttle the bike takes a very long time to accelerate, like i have to rev it to above 5k rpm before it even moves a little, and acceleration is just painfully slow. i thought it might have ti do with to stiff clutch springs or something wrong with rollers. on unrelated note there has also been a rattling sound coming from the variator like a screw is loose in there or something. scooter in question is a derbi Atlantis with hiper engine. any help appreciated and cheers💪
