Sculpture paste best recipe strong and washable. Finally l'm able make one good sculpture paste. 

Watch stored recepie too

Please link batao Bahut sare hain issme se kounsa wala best hai

My pleasure 😊

My pleasure 😊

You are so welcome!

Thank you

Many thanks!

Yesss

Haha do try and let me know

Thanku so much

Ma'am in India we do different craft work with acrylic wall putty..... what will be the result if I directly use this putty for sculpture painting

Thanks for liking

I think the con consistency would be little softer side.

@@craftsbyaishaaqeel7933 yes u r right its not tht hard, wood glue make it soft, if u need proper cone recipe I cn share with u .

Great 👍

Thanks a lot 😊

You’re welcome 😊

Yes I'm working on the rest of the videos

Awww thank you so much did you try it?

No, it's from hardware shop.

Actually I am just experimenting may be one day I will the best recipe. Thanks for your tip I will definitely check it too.infact u try with it and share your result with me

​@@craftsbyaishaaqeel7933 I been working with epoxy putty for the last fifteen years. It can be made very thin and smooth with alcohol! Must be high concentration rubbing alcohol. Rather hard to work with. That's why I'm looking at a water based putty. My first projects were flowers, then graduated to other things. I'm now working the raised surface under my oil paintings to give it a 3-D effect! Trying to find someone else who might be trying the same thing! It really does make a wonderful new effect!

​@@craftsbyaishaaqeel7933 Sorry, ment my reply to :

P.S. ashasinha 4981

Most welcome 😊

I will try my best

Sure

Try to use water proof recipe of sculpture paste and rinse if it get dirty

The way it works is the way of using the palette knife... I'm not sure about explaining but the shape is all based on how you put your pressure... there's some youtube videos about it you can look up or even experiment yourself and find what works for you.

Shape it by removing the sharp square edges

Just above the handle

Yes, I will try that too thanks for the tip.

Strength depends on glue

Aww I visited your videos too they really helpfully best of luck for your future.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XkU9KvcsHoQ.html

Yes dear

The thin part might damages but not the whole

Try to make small batches plz

It's wall putty or wall filler

It's wall putty use to fill holes in wall

The resin will go down into the deep spaces but the tip will remain uncovered no need to waste resin over it. Secondly of course commercial one is better but homemade is nevertheless. You might find sculpture paste in your country but still, in Pakistan, we are unable to reach so for me and for all those who don't have access to it, it's been a blessing to create a good paste by their own.

@@craftsbyaishaaqeel7933 but I have seen some artists making wall putty Fevicol and water cone for lippan art and after it dries completely, they also pour resin over that artwork. Next thing is, can I use this homemade sculpture paste artwork for selling as well? Or will it crack easily?

Great explanation, can u please tell me the type of plate u are using on which u made sculpture paste..

Add acrylic retarder

If you will change the ingredients the result will be change.make bit hard paste

I think u will definitely find one simple and without acrylic one.

Any wood glue you can use

Yes u can mix both plaster gives strength

Wood glue

It depends on the knives. thickness IS not an issue the edges should be thin.

Glue is not a good sealer when it get wet it turn white and sticky

No dear it's just available in Pakistan

Yes

U can try it but it shrinks

No

It will come off

@@craftsbyaishaaqeel7933 then what do you think we can use on canvas?

​@@Tukanggambarklaten Don't use canvas! I put mine on one eighth inch plywood. Plywood must be sealed, but is much stronger and stable!

Plaster will prevent it from shrinkage u will definitely find wall filler there in paste form from paint shop it very common

@@craftsbyaishaaqeel7933 thanku. Shall chk here for wall filler in paste form

Asian paint , nerolac putty paste is available

Wall putty paste ie easily available on India.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XkU9KvcsHoQ.html

RECEPIE OF SCULPTURE PASTE. wet ingredients. 1cup wood glue 1cup wall putty (chalky result plaster based) gesso half tbsp acrylic retarder half tbsp polyurethane or modpode 1tbsp fragrance oil 1 tsp cellulose fibers from sanitary pads 1tbsp(wsaoked) dry ingredients. baking soda half tbsp marble powder (optinal) 1 tbsp (wall putty powder or Gypsum powder )1 cup

Soda fermentate it

I never tried but you can try it too and let me know the result

Oil paints and acrylics DO NOT MIX! Oil on well dried acrylics will work, but not the other way around!

Use diluted modpodege to seal

@@craftsbyaishaaqeel7933 from where I can buy this?

Wall puty

Fevucol is pva glue try to use thick wood glue of any other brand but first try it with fevicol if u already have it, otherwise try other brands.

Im from Pakistan try to get similar material from ypur side plz

I think yes, do try n let me know

I used acrylics

Mam plz tell me best recipe of sclupter past I m confused

I have asian wall putty

Yes

I think no.

@@craftsbyaishaaqeel7933 I got that putty and tried sculpture flower, not so clean but i liked...thanks to u ..

I m using 3 no. Pallete knife....i got leaves also in same shape

Please reply

Some videos don't need language. Try this RECEPIE OF SCULPTURE PASTE. wet ingredients. 1cup wood glue 1cup wall putty (chalky result plaster based) gesso half tbsp acrylic retarder half tbsp polyurethane or modpode 1tbsp fragrance oil 1 tsp cellulose fibers from sanitary pads 1tbsp(wsaoked) dry ingredients. baking soda half tbsp marble powder (optinal) 1 tbsp (wall putty powder or Gypsum powder )1 cup ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XkU9KvcsHoQ.html

Yes

I never tried plz try and let me know

Oo

Oil paints and water based acrylics DO NOT MIX! You can put oil paint over well dried acrylics, however!

One or 2 days

To join plz contact us at. facebook.com/Aa-collections-1100270573338449/ instagram.com/aishaaqeel?igshid=YmMyMTA2M2Y= facebook.com/groups/439821226696328/ ru-vid.com/show-UCn0qBMHksR--raYIuDSS9MA

Silk fiber is a protein fiber from silk glands of an insect. I will recommend you to follow the new recipe.

@@craftsbyaishaaqeel7933 okay 👍

Yes, I announced it yesterday

Sorry for the inconvenience use headphones for instant.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XkU9KvcsHoQ.htmlsi=fysFcavNpGIMWJyy

Only Mix the master with plaster in small quantity

I will try to add English subtitles to it.

Yes its because of plaster of Paris you can use marble powder in it too.

Or white cement

@@craftsbyaishaaqeel7933Thank you. I have one question please. How long does it take to completely dry?

​@@ceciliarosales3398I didn’t find marble powder anywhere.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XkU9KvcsHoQ.html

RECEPIE OF SCULPTURE PASTE. wet ingredients. 1cup wood glue 1cup wall putty (chalky result plaster based) gesso half tbsp acrylic retarder half tbsp polyurethane or modpode 1tbsp fragrance oil 1 tsp cellulose fibers from sanitary pads 1tbsp(wsaoked) dry ingredients. baking soda half tbsp marble powder (optinal) 1 tbsp (wall putty powder or Gypsum powder )1 cup