No video :(

Scx 6 Axle Shim Install and Test with 4S

Подписаться 73 тыс.

Просмотров 29 тыс.

50% 1

Shimmed up and ready!!! Links below to get shims and the SCX 6 along with modded parts and pieces. If you order online please use the links below to place that order, they help out the channel when you do, Thanks!!
Shims to get:
Amain bit.ly/3D0khg6
Amazon amzn.to/3o9NDTc
Ebay ebay.us/WdBY26
Axial SCX6
Amain bit.ly/3CHR4q7 (Silver)
Amain bit.ly/3nPohKg (Green)
Ebay ebay.us/SA2neM (Silver)
Ebay ebay.us/ANNc6P (Green)
Horizon bit.ly/2Y8FfKy (Both colors)
Vitavon Upgrades for the SCX6 on Ebay
Steering Knuckles ebay.us/hijSRc (Silver)
Steering Knuckles ebay.us/3ci82s (Black)
Front Axle Housing ebay.us/XhpUyW (Black)
Front Axle Housing ebay.us/hjIJpd (Silver and Black)
Front Axle Housing ebay.us/AYzV7b (Silver with Brass)
Rear Axle Housing ebay.us/1Cb1RI (Silver with Brass)
Rear Axle Housing ebay.us/rWDINm (Silver and Black)
Rear Axle Housing ebay.us/8016Vc (Silver--- All Aluminum)
Chassis Braces ebay.us/DQSGyw (Silver)
Chassis Braces ebay.us/q5NsTP (Black)
Motor Mount, Slider Design ebay.us/VZptv5 (Silver)
Front and Rear Shock Tower Set ebay.us/7TV2NH (Silver)
Front and Rear Shock Tower Set ebay.us/bfH1yJ (Black)
Rear Shock Towers ebay.us/ojk1W7 (Silver)
Center Link Mounts ebay.us/hfEpkS (Silver)
2.9 Beadlocks ebay.us/CuhZjG (Silver)
2.9 Beadlocks ebay.us/jyviw8 (Titanium/Black)
2.9 Beadlocks ebay.us/1CbZ9Y (Black)
Carbon Battery Trays ebay.us/hX8j1M
2-speed Servo Mount ebay.us/27Rn0E (Silver)
2-speed Servo Mount ebay.us/JrFfWl (Black)
5th Scale Servo Adaptor ebay.us/LmWCv4
Sliders ebay.us/olJMQw (Silver)
Sliders ebay.us/gdJCvJ (Black)
Flysky GT5 Radio
Amazon amzn.to/3GQOTTE
Ebay ebay.us/w21V52
Castle 10a BEC
Amain bit.ly/3wr0xA2
Ebay ebay.us/2nW0SH
Castle BEC 2.0 14A
Amain bit.ly/3woZG2H
Amazon amzn.to/3CSgpO9
Ebay ebay.us/zeuVP1
Castle WP BEC 2.0 15A
Amain bit.ly/3o7WuEK
Amazon amzn.to/3GXBKZ7
Ebay ebay.us/2Fnkpj
CHANNEL MEMBER INFO
If you would like to be a channel member now's the time! I will start a monthly giveaway in a direct paypal payment in the amount of TWICE your monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. So you could win $4, $10, $20, or even $50 depending on your level. Take a look! / @exocagedrc

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 107

@qrisemrc 2 года назад

I like this RU-vid show. Toughly steers the rccar, and if it breaks down, it tells the review in detail about the breakdown. It explains the pros and cons in so much detail that it is a great help in purchasing a new product.👍👍👍

@withoutpassport 2 года назад

It rubs the lotion on it’s skin, lol.

@distilledmilk2441 Год назад

@@withoutpassportfor real😂

@tomlucasrccrawlers9108 2 года назад

Nice work Joe. Shimming goes along ways....so does not bashing it. People that are treating it like an X-Maxx are breaking them. Nice work on the convertible vid too....it does look much better.

@MatthewJorgensen1968 2 года назад

Making the SCX6 better using off the shelf or on hand parts is awesome. I plan on using the shims (which I have) and making the brace for the steering. You have 100% made it easier to mod this thing. Thank you!!

@mylifted4x4 2 года назад

Idk man...if I'm paying premium prices I'd expect premium R&D and this feels like something that should have been caught in testing. Axial has plenty of history making good quality crawlers and trail trucks. Shims aren't hard to install but still. Just my 2 cents.

@quadkrazykeith 2 года назад

Same with all rc’s man all are junk out of the box. Gotta build em up!

@rctd3260 2 года назад

Holy crap that thing goes so slow and smooth. Its so satisfying till you gotta listen to that fan.

@Socalnik66 2 года назад

Thanks for the info. Been looking for this. Wasn’t sure what to buy to avoid blowing up the diff gears. Really love your channel. My SC6 is my new favorite rig. Slowly upgrading parts as I find them.

@lindeleasley 2 года назад

Glad you linked the shims. I already had to replace the front gear set because of a broken tooth.

@The_RC_Guru 2 года назад

I spent hours yesterday cleaning that stock goo out of the axles and transmission. Using a toothbrush, dawn dish soap, crc electronics cleaner, and what worked the best fast orange hand cleaner with pumice. Whew! What is that stuff?!?! It’s sticky like a glue and reminds me of one part of 2 part epoxy they just decided to use for a grease, even smells like it.

@old-rcplane-phart 2 года назад

Knowing horizon, its the cheapEST 'lube' they could find!

@carltonr3417 2 года назад

Why remove it? It looks like good stuff. Won’t fling off like regular grease will at high speed. Not that you need much lubricant anyway to keep things moving smoothly

@pieman12345678987654 2 года назад

If probably do the same and use some actual grease, the snot looks weird and sounds weird, too sticky for me

@jamesflory159 2 года назад

Love it, I changed my pinion from the stock 14t and went to a 16t. Seemed to make it much better for my driving style and I’m also running 4s. I will have to do the steering mod.

@motorcityrcattack9872 2 года назад

I haven't had any issues with my diffs but after watching this I'm gonna check mine.

@MrPoulsenNiels 2 года назад

Nice rig... Just Missing the option to unlock the diff, like on a Absima Sherpa..Also on a huge rigg like this... More gears....

@averagecarguy961 2 года назад

I was so close to buying one but going to wait to a V2 comes out !

@andrewrichey7374 2 года назад

Thank you I just learned something that I never thought of, checking the ring gear for side to side movement,

@Cooldibs 2 года назад

I think the reason for the stripped gears is due to the cut of those diff gears. That specific cut causes an axial force under load which leads to separation.

@bsfunk44 Год назад

Curved gear teeth have more surface area to mesh

@Cooldibs Год назад

@@bsfunk44 yes, but they also cause axial loads wanting them to separate from each other. Usually mitigated by a beefy or reinforced case housing.

@silverbullet126 2 года назад

Good walk-through, will save me some time for sure. Shims already in the air, should be here later this month.

@SteadySpin 2 года назад

Ordered a new after market metal axle and still needed the shims. So thank you for this video cause I ordered those shins also and needed them. Keep killing brother.

@garyanthony3627 Год назад

We’re did you get the shims at

@SwampersRC 2 года назад

Man, that thing need's a metal diff cover of a skid plate for the front diff! I've found that when you increase the voltage you usually need to drop a couple of teeth on the pinion gear (on crawlers anyways).

@krashkingrc9715 2 года назад

Awesome video excellent job very nicely done awesome run

@seththomas2490 2 года назад

The snot looks like a type of marine grease.

@slysplasteringsly1012 2 года назад

Motor assembly honey sticks like that . I use assembly honey. Same as you use on the main running brings in the crank shift and other moving parts . I am a assembly honey snot fan

@kennethrobinson9008 2 года назад

Love that truck!

@ExocagedRC 2 года назад

Thanks!

@nathanielgacutan4336 2 года назад

Anyone here have discover what type of grease or liquid did axial use in their scx6?

@dmgmail7021 2 года назад

26 lb 6th scale with plastic pumpkin? Will always flex(not in a good way) and expand under pressure and especially when it heats up...which it will. So many reviews revealing everything that's flawed by the time you fix all the week points it's really a $1600-2000 item to get it right.

@TheRCAdventurist 2 года назад

Awesome 👍 seems to help

@michaelzimmerman1361 2 года назад

After you shim it install the cover and tighten it. The gap will change. So try different size shims. Not all trucks are the same

@user-tf5yg1qs4d 2 года назад

Does on sim fit in?? Or do you have two??

@papazola5300 2 года назад

Can use 4s for stock esc ?

@michaeltrilck5680 2 года назад

Hi! Good guide to solving the Differential problem/backlash! You don't shim / adjust the pinion. Only the ring gear. Other yotuber's are shim / adjust only the pinion... Why? In 1/1 (Real Cars) you do that for both of them(contact pattern of tooth surface). I think, these is a involute gearing with drive shafts in different planes... Very sensitive if the setting is wrong. What do you think about? I love your videos! Have a nice day! 😎

@thejeepinrealtor5742 2 года назад

Super helpful video. Thanks!

@TOYitCUTE 2 года назад

thank you, u break your rc trucks for us ,))

@NCMOUNTAINSbackyardRC 2 года назад

O yeah enjoyed the crawl 👌💯

@andrewrichey7374 2 года назад

Yeah my Axial early bronco is A pain in the butt getting the body on and off but I’m starting to get it down pretty good now

@robertopracht9748 2 года назад

Cant waith to see someone chop the fenders on this car at least the front onces...might look better than how they are sticking out now..( specialy the front blinkerpoints)

@Eric78360 2 года назад

When Mr. Tolbert gets his that will be the true test..🤣🤣🤣🤣🤣

@ExocagedRC 2 года назад

Oh yeah. Probably 8s it and shoot it to the moon! 😂😂

@J.Pitres_RC 2 года назад

My scx10iii looks so small sense this came out it is a new want

@angelangelov4720 2 года назад

Great info! Thanks! What if you go down a tooth on the pinion? Will it make it more or less pleasant to drive?

@garnarr 2 года назад

The programming card for 1080 hw works on stock esc in the ryft so maby it will work on this to

@ExocagedRC 2 года назад

That's what I'm hoping for, just haven't tried it yet.

@old-rcplane-phart 2 года назад

All horizon esc's r copied hobbywing. Even the avion planes esc's they r charging US $100+ for. I use my hobbywing program box to setup mine.

@eastermister1 2 года назад

Such an informative video!

@kenulmark45 2 года назад

love this truck ! when you add vitavon parts? =) Love vitavon parts !

@redbeardron5967 2 года назад

I'm just waiting for your 6s and 8s testing 😄

@ExocagedRC 2 года назад

Well let’s just say something wicked this way comes. Probably not 8s though but you’ll hear all about it.

@ProNoobRC 2 года назад

Great vid!

@clayton8465 2 года назад

Typo when comparing the diffs. It’s a scx6 diff not a scx8.

@steverc1986 2 года назад

Great info👍

@BlueDually4x4 2 года назад

Kind of watched these out of order, but you've spent a bit of coin getting this to be where it should be out of the box.

@kyleroberts5061 2 года назад

I used gas and removed all that (snot) grease it leaks out after a bit

@thatdrh 16 дней назад

You ever figure out the exact diff lube they use? silicone based 100k, perhaps?

@jlo96f3 2 года назад

Need to find out what lube is being used, like the actual name brand

@ExocagedRC 2 года назад

It’s snot. 😂😂

@aaronshobbygarage2338 2 года назад

Nice video, thanks is for sharing!

@theSvrh 2 года назад

the more videos i watch on the scx6 the more unsure i am about buying one; everything about this thing is expensive and I don't even want to know how much the cost would be to vitavon one of these.. may just save my money and get that new vanquish crawler with the switchable overdrive

@rc-daily 2 года назад

I want to see it on the tire ramp!

@andrewrichey7374 2 года назад

Yeah That was a awesome Jump

@thejeepinrealtor5742 2 года назад

I need to go back and find the video of the braces you mentioned. I assume you mean like a trac bar brace on a 1:1 Jeep?

@ExocagedRC 2 года назад

On this one. Last video I did with it.

@modzilla74 2 года назад

Does it have FOC?

@old-rcplane-phart 2 года назад

Could be grease, but its SNOT! 😁😜🤮

@glennjthompson332 2 года назад

Right! grey BOOGERS!

@overdosed51 2 года назад

Im not sure people would have all these diff issues if they just set their slipper clutch up correctly. 🤔

@decoratingideas7346 2 года назад

Great Video and will add shims when I get mine - QUESTION - does anyone know the axle thread size (Im aware its a 17mm hex hub) but i want to get wider stance with adding extensions but no one seems to have posted the thread axle size (im guessing 8 but is that right)?

@Jvani83 7 месяцев назад

Hello! Can I use 12x16x0.2 instead?

@midwestern_rc 2 года назад

Wait which shims work for these diffs? I checked my front diff and it’s super tight. No play. But I want to have the right shims on hand and I’m going to check it every 3-4 packs

@snootz9937 2 года назад

Did shim my diff , but is was too tight, so I think for me it’s good stock ?!

@Jfitzroy1 2 года назад

So it appears the SCX6 axles will be a beefy upgrade to the Ryft? Similar length shafts. Wonder if they could fit on a Ryft.

@ExocagedRC 2 года назад

From what I can the the scx6 axles are about 1” wider than the portal Ryft axles. That’s a pretty good bit.

@Jfitzroy1 2 года назад

@@ExocagedRC Samsonite!!!! I was way off.

@johngookinsable 2 года назад

I've heard that the system can handle 4s but the motor can't. Who knows for sure now lol

@quadkrazykeith 2 года назад

Lots of us running 4s without issue

@CindyCThys 2 года назад

Looks like a heavy shock oil

@jockpenny01 2 года назад

Hi there what is the name of the grease (snot) in the Diff en transmission and where can I get some

@BIGGBULLxxx 2 года назад

hi I bought one but I'm no good working on these things anymore can I send you mine and you shim it up and cut the I mean wheel well as you did yours?

@ExocagedRC 2 года назад

Shipping would be crazy expensive. I haven't cut the fenders

@S9RUT 2 года назад

Could try the Hobbywing 25A BEC?

@boosieboo497 2 года назад

You mind me asking how much you have in this rig? That vitavon stuff isn’t cheap at all! Most expensive RC crawler ever?

@vinhquoc1742 2 года назад

high end car but using a straight tooth differential is not good.

@ExocagedRC 2 года назад

It’s plenty strong enough for most. But it is sintered metal so that doesn’t help.

@papazola5300 2 года назад

Can use shime saiz 13x16x0.2mm ?

@user-tf5yg1qs4d 2 года назад

Does one sim fit in?? Or do you have two??

@randywong4491 2 года назад

Is it possible to get the part number of the shim you used?

@vbspeed7571 2 года назад

I hope u took.the driver out of the vehicle b4 u flipped it..🤣🤣✌👋

@randywong4491 2 года назад

Did you run 4s with stock ec?

@old-rcplane-phart 2 года назад

👍

@SteadfastRC 2 года назад

Yet another flawed axle design from axial, thanks Horizon for another design people are going to have to spend money and time on to make it correct from the factory . It's called quality control and testing you guys should try it sometime. Here's a golf clap for you 👏👏👏

@_beastmode_rc 2 года назад

People really crying for $3.99 shims?

@SteadfastRC 2 года назад

@@_beastmode_rc the point is when you're paying $1,100 for something that should be done right from the factory, there's been a lot of people who have already busted gears because they didn't know they need to be shimmed

@_beastmode_rc 2 года назад

@@SteadfastRC just like any basher out there, the xmaxx, kraton, outcast, talion, erevo etc need shims too

@SteadfastRC 2 года назад

@@_beastmode_rc I have to disagree man I have a lot of different Basher and racing vehicles, lots of buggies Stampede x-maxx E-maxx hoss various Redcat Crawlers ect. I have been in the hobby since 1992 and the only vehicles I have ever had to shim ring and pinion gears on have been axial Crawlers, everything else has been good from the factory on my other 50-plus RC vehicles. The vehicles you mentioned might be able to benefit from some shimming but I've never had the gears fly apart because they didn't have shims in them