SCX24 Bronco Build Part 9 - HUGE POWER - Furitek Komodo Brushless Conversion

Подписаться 149 тыс.

Просмотров 16 тыс.

50% 1

In this episode of the Axial SCX24 Bronco build the rig takes the next step in it’s evolution and goes brushless! I install the Furitek Komodo and stellar transmission combo along with Furitek esc and transmitter. All does not go as smoothly as planned and I had to make a pivot in order to get the Bronco running. Watch on to see the process!
Follow us on Instagram @capecrawlers!
Affiliate links:
5% off RCAWD: rcawd.com/?ref... - discount code CapeCrawlers
$10 off any order $50 or more: www.fmshobby.c... - discount code Capecrawlers
Amain Hobbies:
Products in this episode
Motor and transmission combo: www.amainhobbi...
Esc: www.amainhobbi...
Avatar combo: www.amainhobbi...

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@CapeCrawlers 2 года назад

Timestamps Upgrades overview: 1:19 Installation: 5:05 Initial start up: 9:56 Complications: 11:27 Short term setup: 13:59 Course runs and crawl footage: 16:36 Thoughts on the conversion and conclusion: 25:44

@GeezerGramps 2 года назад

If you take plaster of Paris & mix it to paint consistency you can paint it on & fill the holes in the plaster cloth. I’ve also mixed 50/50 plaster of Paris & tile grout to paint consistency, this will give it some grit.

@CapeCrawlers 2 года назад

Great tips! The grout mix is genius!

@Nevermindiguesss 10 месяцев назад

R.I.P the 50$/week budget 😂

@HobbyPerfeXion Год назад

Holy slow-crawl batman! 😳 Man that brushless system is sick! Nice!

@CapeCrawlers Год назад

It’s epic. Total game changer for these things!

@andrewrichey7374 2 года назад

And we thank you for everything you share, I’ve learned some things I appreciate. This hobby is my passion I love it. Will catch you on the next one. Peace and chicken grease 😁👍👍

@jasonwilliams9663 Год назад

Great series. I bought my son this same bronco, and am already planning upgrades. One question, ( I'm not too tech savvy, so bare with me). To run this motor, do you have to upgrade the electronics like you? Or can the stock receiver and remote work?

@javierenriquelopezparra6046 2 года назад

Great builds and video. I do believe that FM2 RC did. Bind Avatar, but not sure with which receiver. He could help, maybe.

@CapeCrawlers 2 года назад

Thanks! Yes, I saw Matt’s video. He made it look so easy! I’ve got another transmitter on order but I’ll keep messing with this one in the meantime.

@farmboyrc 2 года назад

your next build other than the deadbolt should be an ultra24 from lgrp!

@CapeCrawlers 2 года назад

I’d like to do a ripper build!

@jlrangel2880 6 месяцев назад

Just subscribed to your channel:) Were you able to resolve the furitek avatar issue? If so, what was the fix? Many thanks!

@andrewrichey7374 2 года назад

Yeah nice driving, new course looking cool. I’ll be watching as it progresses appreciate it as always you sharing your videos

@CapeCrawlers 2 года назад

Thank you! I should have the course build video up by Wednesday

@nycr6biker796 2 года назад

Unbelievable how slow those wheels turn. New course looks great. I guess a comp build series wouldn’t be complete without a competition. Haha.

@CapeCrawlers 2 года назад

It’s wild to see the motor start to spin up before the wheels even visibly move. Brushless motors are fascinating to me

@chevyb0195 2 года назад

Love the chassis setup,I wish this had a 3d printed 66 Bronco Body.

@CapeCrawlers 2 года назад

Thanks! Oohhh that body would be awesome.

@lesabre1972 Год назад

that is one tiny receiver holy cow!!

@CapeCrawlers Год назад

SUPER small, which is great for saving space!

@wheelbarrow2803 2 года назад

Very nice build. I just got caught up on this one. Waiting on my C10 to arrive from eBay and some other upgrade parts I have ordered. Seller mentioned they could not bind the vehicle to the remote so I am hoping it is just seller error as they are a reseller but I might be on the hunt for a V1 receiver/esc soon. For $50 I couldnt pass the C10 up though.

@CapeCrawlers 2 года назад

Thank you! $50 is a steal!!

@wheelbarrow2803 2 года назад

@@CapeCrawlers I thought so too! Wouldn’t happen to have a spare v1 receiver would you? Help you recoup some costs. 😂

@CapeCrawlers 2 года назад

@@wheelbarrow2803 I might have one soon. I'll get back to you!

@TrevorParkJones 2 года назад

Just amazing what that little truck can do! I'm excited to see the final version with everything all tidy and buttoned up! Some killer upgrades, and another great video Adam! Thanks as always, take care!!!

@CapeCrawlers 2 года назад

Thanks for watching! I can’t wait to get the setup cleaned up and finished. What a tease seeing it all together and then having to rip it apart! I should have it corrected by next weekend though 👍🏻

@mark.scale.models 2 года назад

4K Congrats!!! We appreciate you doing this - great content again and again. Thanks Adam!

@CapeCrawlers 2 года назад

Thank you, I appreciate the support!

@CaseyD406 2 года назад

Just watched the whole series. Great videos. Thanks for putting this out I learned a ton.

@CapeCrawlers 2 года назад

Thanks for watching! We’ve got one video left !

@roughrapids9046 Год назад

What slots did you plug them into the stock esc? I cannot get mine to move the motor. Servo moves but nothing else and I’m lost

@CapeCrawlers Год назад

Ch2 is the one you use for the external esc, right next to the servo.

@vivalarevolution1652 2 года назад

I've actually been extremely disappointed in Furitek products. I've had two faulty Lizard Pro ESCs back to back. And a faulty Komodo motor. Don't get me wrong, they work fantastic but for the price you pay, I would expect a high quality product. My first Esc had a short in the wire that connects to the battery, the second was wired in reverse and the motor had a short in it as well.

@CapeCrawlers 2 года назад

Man, I thought I was doing something wrong because I’ve struggled with many of their setups too. I don’t post a lot of the screw ups because I feel like it’s my fault but maybe not. I’ve burned up a handful of lizard pros for what felt like no fault of mine. Furitek has the market nearly cornered though. It’s great to see mofo RC coming out with great brushless setups but we need more entrants into the space!

@vivalarevolution1652 2 года назад

I agree. If my current setup fails again, or maybe if I decide to go another route, I'll be going with MofoRC and their product. I absolutely love their wheel design. One another note though. Post the mess ups. We as a community love to see each other's mistakes it's how we can learn from one another.

@toycoma98 2 года назад

I had defective lizard pro as well, wont run brushed mode. Amainhobbies sent another one for free but same problem. The brushed motor cogs and sputters. Then Furitek communicated with Furitekusa and sent me a free iguana pro. I dont even want to buy brushless motors for the lizard pros because it was so frustrating. Mofo is great but his brushless motor mounts are 3d printed not aluminum. I also wanted to get the Avatar but feared more problems, headaches and screaming bad words.

@codyson1348 Год назад

What is that foam board you have there I'm looking to make my own course

@CapeCrawlers Год назад

Here's a video I did on building my course including the materials I used: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-I8uidVXdLkg.html

@Bryzle1 9 месяцев назад

Really am loving that low end control. What is up with that motor? I thought the Furitech motors were supposed to be silent. That is far from silent. Is it the gears?

@CapeCrawlers 9 месяцев назад

Yes gears and driveshafts I believe

@Bryzle1 9 месяцев назад

I’ve been trying for years to get my brother involved with RC. He saw this video and said it was really cool and that he would like to have one. So, I got him one for Christmas and I bought myself the yellow Jeep also. Thank you for the video! So cool he’s finally getting involved with em….

@jimbo4203 2 года назад

I just burned out 2 motors in a month, not sure what to try next ? I wish there was a go to option that was more durable

@CapeCrawlers 2 года назад

What motors are you using? Mofo RC has some carbon brushed motors that are good for longevity.

@jimbo4203 2 года назад

A stock motor and a 10 dollar Amazon one , but I'll check them out

@CapeCrawlers 2 года назад

@@jimbo4203 Yes, definitely do. I bet with a decent motor you wont have any troubles. The Injora motors are good too. I like the purple Pro 50. Great, cost effective motor.

@VladimirKorsun Год назад

Amazing. Its my dream now.

@JumboJabs 2 года назад

You did it! Ultimate build man. Digging the vids

@CapeCrawlers 2 года назад

Thank you! I appreciate it! We aren’t done yet though 😊

@JumboJabs 2 года назад

@@CapeCrawlers Excited

@mutegoldfish1158 2 года назад

How do you balance and storage charge the tiny battery

@CapeCrawlers 2 года назад

I’ve got a balance charger that I got from Amain hobbies. It does a great job: very fast and safe 👍🏻

@TheGreenerSide09 Год назад

to do this conversion do I need to replace transmiter?

@CapeCrawlers Год назад

For the bronco yes, you will need a new ESC and transmitter combo. V1 electronics from other model scx24's will work if you can find a used set somewhere. Flysky is a good option as well: cost effective and loaded with features.

@masterxyr Год назад

sweet rig and video man! What tyres are those? ty

@CapeCrawlers Год назад

Thanks! These are LGRP gripper tires with Flubberstufferz inserts. Great combo!

@kiknlif 2 года назад

It's so amazing how hard it pulls up the hills with the slower speed. Definitely opens up many more options for different lines. Interesting how you moved some of the weight to the rear by putting the battery in the back but it still has a really good hill climbing angle. Great video

@CapeCrawlers 2 года назад

Thank you! I so wish I could have kept the battery up front. The finished product will have it sitting down low in the middle I hope. And you’re right, the torque and control at low speed is unreal!

@RCCrawlerz209 2 года назад

Dude, you should try one of those RC4WD small scale trucks, think it's 1/18 scale? I'm not sure, but u've been looking at those for awhile now. Lol

@CapeCrawlers 2 года назад

I was looking at those at the hobby shop on Friday. I haven’t heard much about them, good or bad, but it may be worth experimenting with!

@RCCrawlerz209 2 года назад

@@CapeCrawlers Oh for sure.

@andrewrichey7374 2 года назад

Yeah I’ll watch for that take it to a Event

@tylermoore8198 2 года назад

Will you be doing a c10 build? Edit: I found it

@CapeCrawlers 2 года назад

The c10 isn’t done either! At some point I’ll pick that back up and do something outrageous to it

@tylermoore8198 2 года назад

@@CapeCrawlers awesome I can't wait!

@Joenoblocks Год назад

What if you would’ve flipped the motor around with the transmission and just ran the transmitter in reverse for the fitment

@CapeCrawlers Год назад

That’s a good thought and would most likely free up a bunch of room. I’ve got a new furitek avatar setup on the bench so hopefully I can get the micro rx back in there how I initially had it

@kendietz355 2 года назад

Can you do a trx-4 bronco build maybe.

@CapeCrawlers 2 года назад

I've got a black TRX4M on order. I will be doing lots of videos on that!

@kendietz355 2 года назад

@@CapeCrawlers Thaks you that will be so cool🔥

@funshine3571 8 месяцев назад

What battery you usin?

@CapeCrawlers 8 месяцев назад

For 3s I run the spektrum 300mah. For 2s I run the eco power 450mah

@WOLFTRAXRC Год назад

axial needs better stickers

@CapeCrawlers Год назад

For their vehicles or in general? I found that the taillights and door hinge stickers on my other rigs started peeling early and looked pretty bad. I would lobby for better decals across the board!

@WOLFTRAXRC Год назад

@@CapeCrawlers cutting decals saving door handles. That stuff

@andrewrichey7374 2 года назад

Still that was awesome