Тёмный

Scx24 Injora 050 motor swap for the Dig Rig?!!! Testing out another motor option! 

2FM RC
Подписаться 31 тыс.
Просмотров 15 тыс.
50% 1

Checking out the 66t 050 motor from Injora! Does it compare? Let’s find out!
Injora 050 motor found here
www.amazon.com...
Injora Beadlocks with mini hyrax tires found here
amzn.to/3ESDEZM
SOME OF MY FAV UPGRADES FOUND BELOW!
Small 2s battery I’m running here
amzn.to/37ouPr8
Work mat I’m using (and LOVE) found here
amzn.to/3ACRBsU
Treal aluminum high clearance links found here
amzn.to/3jZd1KO
Hot Racing high clearance links (Deadbolt) found here
www.ebay.com/i...
Emax digital steering servo found here
bit.ly/3wdd7lp
Emax analog servo found here
bit.ly/3uVK6Jy
Rc4wd 1.2 tires found here
bit.ly/3qQJmFd
Hot Racing aluminum steering links found here
bit.ly/3pKyMiy
Treal brass diff cover found here
amzn.to/2UrPZBx
Treal brass steering knuckles found here
amzn.to/2TXpaVI
Treal brass extended wheel hubs found here
amzn.to/3zXLS0A
Treal overdrive gears found here
amzn.to/3xS5Doq
Treal high clearance links found here
amzn.to/3vVo61O
Treal wheels found here
amzn.to/2T3hdOw
Hot racing aluminum steering links here
bit.ly/3pKyMiy
Rc4wd Patagonia tires found here
amzn.to/3qpGizu
Don’t forget to use the discount code 2fmrc at fullsendrc.com for 15% off your order!
Don’t forget the amainhobbies affiliate links! If you need anything let me know and I’ll get ya a link! You can get to amazon through the link below and help out the channel as well. Thanks so much for the support and as always, hit me up if you have any questions or anything!
amzn.to/3x1HRX2
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~

Опубликовано:

 

28 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 78   
@ajustice2010
@ajustice2010 3 года назад
id love to see this vs the mofo rc 050(non boost modle) vs the hot racing high torque on stock esc/ controller! im personally looking for lower speed controll and slow crawling! id love to go brushless but it appears to be back order for a while and expensive!
@wrhythm
@wrhythm 3 года назад
Have you tried using a heatsink on your motor? You can get aluminum or copper with an adhesive back and stick a few on the can. Or even throw a micro fan on it powered by the rx.
@2fmrc
@2fmrc 3 года назад
I honestly haven’t ever had one get hot enough that I really worried about it. I have some heat sinks off of some raspberry pi systems I used to build game systems out of that work great on them but usually don’t even bother honestly.
@wrhythm
@wrhythm 3 года назад
@@2fmrc I use those same pi heatsinks. Probably doesn't need it, but I like it for peace of mind!
@2fmrc
@2fmrc 3 года назад
@@wrhythm yeah it definitely don’t hurt!
@rekik66
@rekik66 3 года назад
Pro-line is coming out with some mini Hirax. So does that make Injora the original and PL the knock off? 🤣. I just ordered the new super swampers from Rc4wd!!! 🙌
@2fmrc
@2fmrc 3 года назад
Wow! Hadn’t thought about that lol. New Swamper?!!! Check my next vid 😉
@jdsrcs8061
@jdsrcs8061 3 года назад
Man your mini Ryft is sweet!!! Hahahahahahaha I will give it a good home if you ever want to get rid of it!!!$🤘🤘🤘🤘
@2fmrc
@2fmrc 3 года назад
It’s a fun little rig. Gonna be even more fun now that it has more power!
@petechipps9770
@petechipps9770 2 года назад
Can we still get that Dig Rig chassis?
@2fmrc
@2fmrc 2 года назад
Should be able to. They are on shapeways.com just search Scx24 and there are a bunch of different ones. The one I have is the rum runner chassis.
@petechipps9770
@petechipps9770 2 года назад
@@2fmrc thanks man. I will definitely look.
@kevinsquibbs8415
@kevinsquibbs8415 3 года назад
Hello Matt will the skyfly radio blind with the axial receiver
@2fmrc
@2fmrc 3 года назад
No. You’ll need the flysky receiver.
@Rowdy216
@Rowdy216 3 года назад
How are you getting all that flex with the mofo, chassis? I swapped to the mofo, and lost a lot of flex, I'd like to get that back on my rig.
@Timk6728
@Timk6728 2 года назад
What cage is that?
@2fmrc
@2fmrc 2 года назад
It’s from shapeways.com just search Scx24. They have a bunch of different ones. This one is called the rum runner
@Timk6728
@Timk6728 2 года назад
@@2fmrc thx
@abrockman23
@abrockman23 2 года назад
is your injora 66t motor incredibly loud?
@2fmrc
@2fmrc 2 года назад
I don’t think it seemed too loud but honestly didn’t run it long. Had several others to test.
@DerekLed
@DerekLed 3 года назад
The wheel to wheel weight issues continue lol. The only thing I didn't see is a link to the Bead Bracelet! (Great father)🤣 Great video
@2fmrc
@2fmrc 3 года назад
Haha! I was wondering if anyone would notice. It says dad so i wouldn’t trade it for anything though!
@DerekLed
@DerekLed 3 года назад
@@2fmrc That is great 👊
@jarrod1507
@jarrod1507 3 года назад
Found you when I got back into the hobby after 5ish years and purchased a scx24 c10, since last month I have modded it out with the help of your channel and some other research. Ive bought a few rigs in the last 30 days lol, tf2 4 runner, element knight runner, rc4wd c2x, vs4-10 ultra kit ( 87 Yota body to mount on it), and I scx24 dead bolt for my 2 year old ( he loves it). I appreciate all your help man, awesome channel.
@MofoRC
@MofoRC 3 года назад
Matt you look like the kinda guy that wants some guts behind your brushed motor. Hit me up ill send you the new buzzsaw Demon 050 Boost 20T Motor, Check out mofo rc I just posted a video of the wheel speed and power
@sincitycrawler7375
@sincitycrawler7375 3 года назад
Currently running this motor swap and absolutely love it… has enough torque for me definitely
@SlavaRC
@SlavaRC 3 года назад
Very cool and beautyful bouncer, excellent work my friend!)🤩💥💯👍👏
@geneschindler9537
@geneschindler9537 3 года назад
You sound like your self,I like video right now because I been trying to figure out what motor I want to in stall build 👍
@hellofromsoutheastalaskarc7517
@hellofromsoutheastalaskarc7517 2 года назад
Hello from southeast alaska how's your night going bro
@willbrasseur515
@willbrasseur515 2 года назад
Sticker on motor holds heat. Always take stickers off. It works for me.
@dirtrider88
@dirtrider88 2 года назад
5:22 what 2 motors? unless i missed something you mentioned 4 different motors in the beginning EDIT: i see i already asked that question. well i leave this here, better chance someone with an answer will see it.
@Funcentric
@Funcentric 2 года назад
Any reason why you picked the 50T version va the 66t offering (purple one) from injora?
@2fmrc
@2fmrc 2 года назад
It was the only one they made at the time and just what they sent me to test. Haven’t ran the purple one so not sure how it compares really.
@dirtrider88
@dirtrider88 2 года назад
5:22 what 2 motors? you never said
@sincitycrawler7375
@sincitycrawler7375 3 года назад
There is definitely a different size for the wheel weights. I run the weights in the Injora wheels currently
@2fmrc
@2fmrc 3 года назад
Good to know!
@mb9996
@mb9996 3 года назад
With all the post you have, have you ran across any decent axel and axel output shafts. I keep snapping mine like pretzels with a komodo set up.. haven't broke any yet with .50 brushed motors though.
@2fmrc
@2fmrc 3 года назад
Mofo Rc has some that look nice and beefy. I haven’t honestly tried them myself but they look solid. Fullsendrc also has some that are much beefier. I’ve seen a few people have issues with them but I’ve never had a bad product from them. moforc.com/store-home/ols/products/scx24-stock-length-stainless-steel-front-inner-and-outer-axle-shaft-kit
@centeguahan3760
@centeguahan3760 3 года назад
Awesome vid bro I really enjoyed this! I too agree with you on the OX motor 050, really well built & well rounded I love that one as far as brushed goes. I'll give this a shot for sure! Keep up the great uploads man. And again, my apologies for my last comment, but we just speaking truth is all. All love bro!
@2fmrc
@2fmrc 3 года назад
Heck yeah man! That ox seems to be a great option. No need to apologize. Thanks for keeping me in line 😆. Didn’t even see the other comment for some reason so I had to go look for it just a bit ago. I responded to it and really appreciate you.
@Mckhus
@Mckhus 3 года назад
Unrelated to motors but have you looked at those giant foams they made for 24 tyres? Seen them on recent Harley designs vid i believe. I run my stuff with no foams at all now and wonder what’s the difference.
@2fmrc
@2fmrc 3 года назад
The crawler innovations? Not sure which ones he had. Haven’t been watching the build but I may need to check it out. I haven’t bothered with different foams in anything yet but really need them in the lgrp tires. Other than those I’m fine with most of the Rc4wd tires & the foams they come with.
@MofoRC
@MofoRC 3 года назад
I cut the foams in half and they're perfect.
@forrestcrabbe
@forrestcrabbe 3 года назад
🤘
@prestoncantrell5719
@prestoncantrell5719 2 года назад
Where can I get that 1/24 Ryft cage???
@2fmrc
@2fmrc 2 года назад
Shapeways.com just search Scx24 They have a bunch. Mine is the rum runner chassis 🤘
@joediaz6055
@joediaz6055 3 года назад
Awesome videos!! So helpful with my Scx24 build Did you have to reverse the wires on the injora motor? Thanks 👍🏽
@2fmrc
@2fmrc 3 года назад
To be honest with you I didn’t but I’m running the transmission flipped with the motor more forward and I’m running it with my flysky noble so yeah I can just swap the motor direction with it or even swap the direction in the Furitek app since I’m running it on a Tegu esc. So I’m not 100% sure but I’d say they have it wired to be a direct swap with the stock motor and there would be no need in switching the wires. Don’t hold me to that but since they are marketing it for the scx24 I would say it’s a direct swap vs when we were trying to make a barrage motor etc work and had to flip them.
@garrettpitt2057
@garrettpitt2057 2 года назад
No
@William-McCueRC
@William-McCueRC 2 года назад
im desigining a servo actuated dig unit, but this looks very intresting! what ESCs are you using?
@Danielxperez14
@Danielxperez14 2 года назад
do you recomend this motor over the barrage? because I currently have the stock motor
@2fmrc
@2fmrc 2 года назад
I would recommend the ox motor over any of the brushed motors honestly. I would with it. It bolts straight up also! www.ebay.com/itm/Ox-050-Brushed-BOLT-IN-Motor-Upgrade-any-SCX24-Free-Ship-SCX-24-/164719801983?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
@Danielxperez14
@Danielxperez14 2 года назад
@@2fmrc I heard about it, thanks man! I was just thinking about a budget motor as of temporarily
@Ddigzdirt
@Ddigzdirt 2 года назад
I'm loving everything injora is making for the scx24. I'm way out from a hobby too so its almost my only option. at first I was worried about inferior quality but that wasn't the case at all🍺🇨🇦
@justinhippler9698
@justinhippler9698 2 года назад
15$ you will send it back in literally like he said the weekend went through 3 before giving up
@rez3077
@rez3077 3 года назад
What?! Stand by for something new from furitek? I just got my tegu today!!
@rez3077
@rez3077 3 года назад
Any idea on the timing of this new mysterious release?
@2fmrc
@2fmrc 3 года назад
@@rez3077 I’ll be sure and ask! Not 100% sure yet but I do know I should have it by Monday or Tuesday hopefully 👍
@CanadianRC96
@CanadianRC96 2 года назад
New sub, really liked the orange "ryft" style cage, it's one I haven't personally seen much of, where did you get it?
@2fmrc
@2fmrc 2 года назад
Thanks so much for the sub! It’s called the rum runner cage from shapeways.com They have several different styles for the scx24. Let me know if ya need anything!
@CanadianRC96
@CanadianRC96 2 года назад
@@2fmrc awesome, thank you. Great content. Glad I found it while looking up the injora 050 👍
@kieranb1275
@kieranb1275 3 года назад
Great vid dude what do u think of the little guy raceing portals and ultra 24 chassis
@2fmrc
@2fmrc 3 года назад
Yeah I’ve been wanting to try some portals for awhile! I backed the Kickstarter for the other company coming out with them. Hoping it’ll be soon!
@2fmrc
@2fmrc 3 года назад
@Country Boy Number 01 can’t wait to check them out!
@Supaslow5.3
@Supaslow5.3 2 года назад
What’s the track made out of?
@MrMrsregor
@MrMrsregor Год назад
He has a video about how he made his track on his channel
@nickjohnson4366
@nickjohnson4366 3 года назад
Have you tried the Treal extended wheel weights in the injora beadlock wheels? Wondering if they fit
@2fmrc
@2fmrc 3 года назад
Yes I’m running the treal hex with the weight inside of mine!
@nickjohnson4366
@nickjohnson4366 3 года назад
@@2fmrc hey thanks, I’ll be sure to use your affiliate link. Really appreciate your content. Entertaining and helpful.
@2fmrc
@2fmrc 3 года назад
@@nickjohnson4366 really appreciate that! These are the ones I’m using (just so no confusion) Let me know how they work for ya! amzn.to/3lYDiII
@liammcgeath6665
@liammcgeath6665 3 года назад
I have the smaller size injora motor haven't used it yet still using my 2nd stock motor I put in I want to see if it lasts longer then the original stock motor it feels different slightly slower crawl I'm probably just making it up. Great video 🤙
@2fmrc
@2fmrc 3 года назад
Yeah I’ve found the 030 motors to be a little weak for my liking but it all depends on the setup!
@MrTimmyGT
@MrTimmyGT 3 года назад
Hey bud, just found your channel and love the content! Would you consider this an upgrade to the stock motor or just a replacement for it? I have the c10 stock....but now that I found your channel that's about to change lol
@2fmrc
@2fmrc 3 года назад
Hey! Glad you found the channel! Let me know if ya need any help with anything and I’ll do my best. This is definitely an upgrade imo. Any of the 050 motors will be a bit better. So far the ox motor is probably my favorite but I just got a new Furitek brushed motor (050) that I’m going to be testing soon. They say it’s the best. We shall find out lol
@Hurtmeplenty.
@Hurtmeplenty. 2 года назад
any one know where to get this chassis?
@2fmrc
@2fmrc 2 года назад
The orange one? Shapeways.com they have several different ones. Just search Scx24!
@Hurtmeplenty.
@Hurtmeplenty. 2 года назад
Thanks man
@2fmrc
@2fmrc 2 года назад
@@Hurtmeplenty. anytime!
Далее
КОТЯТА В ОПАСНОСТИ?#cat
00:36
Просмотров 921 тыс.
We finally APPROVED @ZachChoi
00:31
Просмотров 8 млн
HYDRAULIC PRESS AGAINST BMW CONNECTING RODS
8:02
Просмотров 1,8 млн
$0.09 Razor Blade into $3,000 Knife
19:02
Просмотров 2,9 млн
SCX24 DIG RIG Setup?
20:03
Просмотров 21 тыс.