Scx24 Link Riser incline & New Body?!

Просмотров 8 тыс.

% 271

Quick incline test with and without the 3D printed link riser. I made a new body for one of my rigs! Stay tuned to see what it’s about!
File for 3d printed link riser found here
www.thingiverse.com/thing:4806394
HELP SUPPORT the channel by clicking my affiliate links below to amainhobbies or amazon and then shopping at no extra cost to you!
Thanks for any help!
Amainhobbies affiliate link here
bit.ly/3CcTUCN
Amazon affiliate link here
amzn.to/3hohoNd
Don’t forget the discount code 2fmrc when checking out at most of your favorite places like Furitek,fullsendrc,MofoRC etc. it may just save you a little cash!
SOME OF MY FAV UPGRADES FOUND BELOW!
Work mat I’m using (and LOVE) found here
amzn.to/3ACRBsU
Treal B Type beadlock wheels found here
amzn.to/34CpbEc
Treal aluminum high clearance links found here
amzn.to/3jZd1KO
Hot Racing high clearance links (Deadbolt) found here
www.ebay.com/itm/Hot-Racing-Aluminum-High-Clearance-Links-Set-Axial-SCX24-Deadbolt-SXTF133HA01-/265183041526?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Emax digital steering servo found here
bit.ly/3wdd7lp
Emax analog servo found here
bit.ly/3uVK6Jy
Rc4wd 1.2 tires found here
bit.ly/3qQJmFd
Hot Racing aluminum steering links found here
bit.ly/3pKyMiy
Treal brass diff cover found here
amzn.to/2UrPZBx
Treal brass steering knuckles found here
amzn.to/2TXpaVI
Treal brass extended wheel hubs found here
amzn.to/3zXLS0A
Treal overdrive gears found here
amzn.to/3xS5Doq
Treal high clearance links found here
amzn.to/3vVo61O
Treal wheels found here
amzn.to/2T3hdOw
Hot racing aluminum steering links here
bit.ly/3pKyMiy
Rc4wd Patagonia tires found here
amzn.to/3qpGizu
Don’t forget to use the discount code 2fmrc at fullsendrc.com for 15% off your order!
Don’t forget the amainhobbies affiliate links! If you need anything let me know and I’ll get ya a link! You can get to amazon through the link below and help out the channel as well. Thanks so much for the support and as always, hit me up if you have any questions or anything!
amzn.to/3x1HRX2
-~-~~-~~~-~~-~-
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-68cFkrpD4dA.html
-~-~~-~~~-~~-~-

Развлечения

Опубликовано:

28 фев 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@William-McCueRC 2 года назад

Hey! thats my design on thiniverse! im really glad to see some people getting use out of it! it was insane to see something so small only avalable on shapeways so i decided to draw it up since i had the ability to. my main goal with it was to add some room for high clearance setups to work with lots of flex. the added climbing angle helps too! great vid! Ill be sending you out some of my "McCue RC Mantis High Clearance Links Steering Behind Axle Kit" soon!

@2fmrc 2 года назад

Do you have one made for the 1/24? This one started as a 1/10 model and I scaled it down etc. Be much easier if there’s already one available in 1/24 scale lol

@William-McCueRC 2 года назад

@@2fmrc no, the link riser is my design, but the hot rod body is badass!

@2fmrc 2 года назад

@@William-McCueRC oh nice! Well we really appreciate the time and effort you put into it!

@pedraza_rc1812 2 года назад

I got some of those links I need to install them into something🤣

@wingnutbert9685 2 года назад

Hi William! For those of us in the cheap seats, just starting out, could you explain the principles behind what raising the mount location does and why? I'm interested in the reasons behind these sorts of things. Thanks!

@garystanislawczyk8032 2 года назад

I was serious about purchasing the engine piece. Super sick print man!

@canuckchuck8836 2 года назад

The body is AWESOME! I love the engine/servo cover. Need a bed to complete the pickup look. That would look so good as a rat rod!

@stunod-RC Год назад

You have Got to bring back this body!! That’s so freaking cool..!! Ps: motor was a good touch.

@rekik66 2 года назад

That 3d printer! I told myself to not buy anything else and finally set up the printer!

@jeffparryncc1701 2 года назад

Thank you for putting a descent surface on your incline. Bravo Sir.

@micahandamyzastrow4910 2 года назад

I love the hot rod body. Nice work.

@curtmartini66 8 месяцев назад

Love the second truck. I thoght the rear riser alowed more articulation when running high clearance links. I did not know it helped with climbing angles also.

@DoubleADay 2 года назад

I've had my pro's for a little while. I originally mounted them on my tetra24 but when I got my Gladiator, I knew which rig they was going on.

@jeffmackovitch9987 2 года назад

I really like how that body turned out. Well done, Sir!

@mikaldixon830 2 года назад

Excited for this one! Have been waiting for someone to test this on video 🤙🤙

@billythekidrcs1769 2 года назад

Those tires are sweet looking and I would like to get a couple of those link risers

@DoubleADay 2 года назад

Looking forward to the next tire comparison. Lots of new choices in the last year

@Funcentric 2 года назад

Great primer/sanding job on that body! Night and day!

@jaymccumber8928 2 года назад

Definitely like the body, you did a nice job. Been running the ProX for a couple days & liking em so far, kinda thought cuz they look awesome that they wouldn't perform lol, but not bad so far on indoor course 🙂

@skipmiller8309 2 года назад

Hey Matt, love the Munster Build. Those T-bucket tubs are awesome!!!.....You are going to like those Mickey Thompson Baja Pro X tires. I just put a set on my gladiator and they hook up awesome. I have the exact same set on my 1/10 Gladiator and those hook up just a well. The lug set up allows them to find any nook and cranny and just keep going. I hope they work out just as well for you as they did for me.

@murph9464 2 года назад

Very cool. I really like that new body style

@Frank-st7ku 2 года назад

I have these weighted rock sliders for my jeep gladiator on ebay, they're 3d printed and look really good and i didnt think they would help performance but they actually make it more stable!

@KurtsRCs 2 года назад

That body looks sweet I like how it turned out

@jacksloan3516 2 года назад

Nice, please put the body and engine on thingiverse.

@coleneteler4443 2 года назад

Dude that body is awesome.

@RCtime 2 года назад

Very nice build 🚀💥 Both trucks 🔥🔥🔥 Nice video 📺👍

@DeliberateNRandom 2 года назад

I love that new body! I'm running the RC4WD Mud Slingers on my 3D printed SKP Engineering low CG frame. It does great for my neighbor's spray foam course. Video is on my page for anyone interested. I need to check on springs I can mod to suck it together instead of pushing for clearance. I have the Gladiator and Chevy, as well for different build styles.

@fcukeround 2 года назад

Love the rat rod! You've been watching too many Danny Huynh videos lol. All you need now is a skull head with a cowboy hat 🤠

@mgscheue 2 года назад

Interesting. I have the Mofo riser on one of mine. I didn't do an A/B comparison it's one of those things where I wondered if it made a difference. Looks like it does.

@sammyboswelldirtybrc7580 2 года назад

That’s sweet I dig it

@D-ayytoodap-yay 8 месяцев назад

I need that hot rod body. It looks so cool

@wingnutbert9685 2 года назад

Just to toss an idea out there, if you like this aesthetic. The satin black on that body looks awesome. Would be cool to take a fine gold Sharpie or paint marker (Or 3-hair brush and paint if you're rea lgood....) and pinstripe it out. Sort of like old big iron machines like steel mill powder hammers or factory machines. Would be kinda cool having the mix of the newest tech 3d printing with that vintage tech machine look. Just a thought. :)

@billfenner4003 2 года назад

The printed body is sweet

@billisbad2220 2 года назад

Nice vid, good info 👍

@brianonthego 2 года назад

Looks like it helped. That looked steeper on camera...like 70 degrees.

@ronniesmith7540 2 года назад

Really like that hotrod body! Interesred in letting one know the stl files?

@4reelfishing635 2 года назад

I really need you to make this body for me lol I've looked everywhere for a 18th or 20th scale I thought might work the 1/24 seems to narrow

@edvert1996 Год назад

Love it! What battery did you use in it?

@4reelfishing635 2 года назад

That body is sweet anyone make a lexan body or just curious how does the resin printed bodies compare on weight and strength cause I'm pretty hard on mine the stock body holds up well I think that would be a cool video idea to do a comparison of the 2 materials

@wingnutbert9685 2 года назад

And I'm going to add my voice to the chorus of people wanting this body and motor servo cover!!!!! Please tel us if you're inclined (or allowed) to print and sell these? Or provide a print file once you are happy with your tweaks? Would it fit on a mostly stock Deadbolt?

@wyattschroeder137 2 года назад

Love that body. There a way to get one without a printer? Been wanting to build a slammed 2wd scx24 rat rod and would love this body for it.

@BrunoSilva-jf9bj 2 года назад

Nice vídeo…where can i get the file for that sick body??🤟🏻🙌🏻💪🏻🔝🔝🔝

@thepassenger6499 2 года назад

The printed body looks badass! Can we please call this an off-rod? :D

@2fmrc 2 года назад

That’s perfect!

@thepassenger6499 2 года назад

@@2fmrc I have a quick question since I'm fairly new to the hobby and upgraded my c10 a little bit: How difficult is it to install the furitek micro komodo? I know that you already made a video about it and i probably checked out your entire channel. 😅 But everything is pretty new to me and i really don't want to mess up my c10. Thank you in advance! 👍🏻

@vbspeed7571 2 года назад

Hello from V&b speed a new rc community..dude those rigs r sweet✌️just dropped new rc drag videos #2022Drags

@Mrtomskiee2 2 года назад

You selling those bodies man?! I’d like one. Just don’t own a 3D printer. Thanks.

@PSYCHO13GARAGE 2 года назад

N ice work. I gotta get my 3d printer all set up so I can do cool things like you are doing. Where did you get the files for the link riser and the body? did you make them yourself? Great video as always!

@2fmrc 2 года назад

Thingiverse. The body started as a 1/10 file and I scaled it down and trimmed etc. The link riser is already made for the scx24!

@PSYCHO13GARAGE 2 года назад

@@2fmrc cool thanks for the info

@audiosoil1 2 года назад

That body is badazz! What chassis is it on?

@xkillerthrax420_9 Год назад

Where u get the ray rod body

@backyardr.c.channel4732 2 года назад

I like the printed body!! I am thinking about getting a 3d printer are you using pla or abs? And what printer are you using?

@2fmrc 2 года назад

I used pla on this one. Using the Ender 3 V2. I’ve had great luck with that printer. I now also have the Ender 3 S1 and a resin printer. The resin is insanely smooth and detail is amazing but things made on it are kinda fragile. The v2 blows the S1 out of the water for me. It’s so much more consistent and just works better. I use the S1 to print flexible material like the ninja flex for anti foams for my 1/10s etc but other than that I don’t even use it. amzn.to/3b2pU4Q

@backyardr.c.channel4732 2 года назад

@@2fmrc Good stuff man! Thank you! I been looking at many printers I might just go with the ender v2 !

@2fmrc 2 года назад

@@backyardr.c.channel4732 it definitely takes some getting used to and trial and error. I was so ticked at first that I couldn’t get a good print I almost gave up on it. But once it’s dialed in it’s more consistent than my S1. That thing will print perfect one print and garbage the next lol. The v2 once it’s leveled and good to go I can print for wks without messing with it again. The resin printer definitely is the easiest to set up and go and hardly ever has any failed prints but the parts are pretty fragile.

@ManicManRC 2 года назад

Where did you find the motor files to print? Nice rig 👍🏻

@2fmrc 2 года назад

Thanks! It was a 1/10 file on thingiverse and I just scaled it down to fit.

@geoffchambers3589 2 года назад

Did you really gain a degree? It seemed to walk up the ramp without the riser. Seemed to struggle quite a bit as you increased the angle with the riser. I'm wondering how much better you could do without it.

@2fmrc 2 года назад

Yeah it’s honestly so close that it’s hard to tell. Not enough gain to clearly say it’s better with or without imo

@petechipps9770 2 года назад

Can we get bodies like that printed from shapeways? I don’t have access to a printer.

@2fmrc 2 года назад

Not that I know of but I haven’t looked in awhile.

@soundmindtv2911 2 года назад

I'm so frustrated. I got the scx24 and ran it stock and absolutely loved it. Then I started seeing all the upgrades, and started buying parts. Spent a bunch of money, and nothing works. All these youtubers show these parts supposedly just bolted on, and their rig performing so well afterward, but I buy a recommended servo and a bracket, bolt it on, nope. Servo flanges hit the frame, don't work. In the bin. Buy telescoping shocks, bolt them on, add some spacers to get them out from the chassis a bit, try it, nope. Suspension don't work anymore, everything binds up. Buy high clearance links, bolt them on, everything seems grand, get the body back on and try it all out - nope, suspension don't work now. Interface everywhere. I just wish more youtubers were honest about stuff. All these parts probably work fine on a full custom build, built around them, but do what they pretended to do in a video? No way. They edit out all the frustration and extra work to trim the chassis, polish all the pieces of those shocks to get them to not bind, do whatever to address all those interference issues, etc, to make it look like they just bolted it on and crawled over Moab. Not possible.

@2fmrc 2 года назад

If you don’t like to customize your trucks and work with them to get things working then I’d suggest another hobby honestly. Should of been around when there were no aftermarket parts even made for these things and we were bolting up anything and everything we could find that was even close to the size of these trucks. That took some work! These bolt ons are simple but yeah they do require a little set up. I kinda figure that’s a given if you really want performance. Most things are pretty simple with these little guys for me though. I usually try to address any issues I come across (in my servo swap vid I think I even mention I cut the tabs off to clear the frame) it’s not something I always do though. Just if it’s hitting because of the links (wheelbase) I’m using etc but my truck is different from every single other persons out there so if I don’t have the same issue as you I can’t address it.

@soundmindtv2911 2 года назад

@@2fmrc don't get me wrong, I'm not dogging on you. I'm just venting. The servo in question was an ecopower, can't remember who recommended it now. It's definitely something for a custom chassis, not a bolt-in deal. Sticks out far enough that it needs a lot of mods to make it fit, including ditching the front bumper (jeep jlu) I know it's just accepted that if you upgrade anything you need to do a ton of work sometimes to make it work. I just wish the other youtubers wouldn't minimize that, because there are several channels where they act like they just bolted something on and hit the trail, when it actually turns out to be an all-day project. Peace, my brother - you're doing great work with this channel, and I greatly appreciate it. Just wish I had found your channel first, before some of the others 😂 This trend goes in all genres, too, not just RC. From camera gear to DJ gear to RC to automotive to investing. This is the age we live in now, I guess.

@jberranner 2 года назад

Why does the front left lift up like that in an incline, ive seen a lot of people where this happens. Can you prevent this from happening?

@garrettladelle7793 2 года назад

Touque of the motor and worm gear axles. The rear end drives closer to the front, shortening the wheelbase and raising the ride hight and that makes it easier for the motor to torque the chassis in the direction that lifts the front left wheel. Overdrive front worm gear set will prevent it. It makes the the front wheels spin slightly faster than the rear to keep the wheelbase stretched out

@stuckintrees4796 2 года назад

Sweet body do you sell those?👊

@BoomslangSuss Год назад

Perhaps I missed something, but I’m not sure you actually proved anything because you didn’t run the first vehicle w/o riser at the steeper angle. It doesn’t seem like the first vehicle was at its limit on the one and only run you showed.

@2fmrc Год назад

It wouldn’t run any steeper without the riser. I tried before shooting. It was basically maxed at that point. That’s why I started there. They don’t really do much of anything honestly. Maybe a tiny improvement but not anything amazing imo. I’d rather have a chassis with upper link mounting positions to make adjustments than a link riser.

@BoomslangSuss Год назад

@@2fmrc This is such a great video and I love that you did it. This is the only video I’ve seen like it. However, I’d have to see the other vehicle as well to establish some level of scientific validity. Let’s see a follow up video for us doubters lol!