SDG #310 Aixun H310D 1000W SMD Rework Station

Просмотров 17 тыс.

% 377

PCBWay 3D Printing and Fabrication: www.pcbway.com/rapid-prototyping/
Aixun Website: aixuntech.com
Aixun H310D: s.click.aliexpress.com/e/_DdPD4bT
Picoscope 5000 Series: www.picotech.com/oscilloscope/5000/flexible-resolution-oscilloscope
Support the Channel with Patreon: www.patreon.com/sdgelectronics
----------------------------------------------------------------------------------------------------------------------
SolderKing UK Made Solder: solderking.com/
----------------------------------------------------------------------------------------------------------------------
SolderKing UK Made solder available at Kaisertech:
UK JBC Distributor kaisertech.co.uk/ Discount Code: "SDG5"
----------------------------------------------------------------------------------------------------------------------
0:00 Introduction
1:24 PCBWay
1:55 What's in the box?
2:17 Handpiece Detail
3:30 Rework Nozzles
4:50 Handpiece Stand
5:49 Control Unit
8:09 Inside the Unit
13:16 GUI and Functionality
20:56 Firmware Update/Aixun Cloud
22:33 Calibration
24:32 Conclusions
----------------------------------------------------------------------------------------------------------------------
3D Printers:
Ender 3 S1 Pro on AliExpress: bit.ly/3Tfiz22
Geeetech Mizar S on AliExpress: bit.ly/3MN0c0M
Artillery Genius at Banggood: bit.ly/32iG2dv
Geeetech Mizar S on AliExpress: bit.ly/3MN0c0M
Geeetech A20M at Banggood: bit.ly/2YooVll
Geeetech A20M at AliExpress: bit.ly/3oBqo2I
Geeetech PLA+ Filament: amzn.to/3gelSX1
Ender 3 V2 at Banggood: bit.ly/36lN8Ny
Ender 3 V2 at AliExpress: bit.ly/3j1C2CO
-------------------------------------------------------------------------------------------------
Soldering Tools and Equipment:
Aixun T420D On AliExpress: bit.ly/3cQXXhh
Aixun T3B on Aliexpress: bit.ly/3CHerj1
Aixun T3B on Aliexpress: bit.ly/3cDkWIY
Aixun T3A on Aliexpress: bit.ly/30LDcgG
AiXun T3A on Aliexpress: bit.ly/2VdRVhU
Yihua 853A Preheater: www.banggood.com/custlink/DGDDWeEuz6
Youyue 946C Hotplate at Banggood: bit.ly/2MuLwqM
Youyue 946C on AliExpress: bit.ly/374v3Tp
Solder Paste: bit.ly/2E1P5jR
Solder Flux: bit.ly/2MQn7we
Quick 857DW+ Hot Air Station: bit.ly/2OWDvf4
T12 Soldering Station: www.banggood.com/custlink/3KK3rVZu53
AC Version: www.banggood.com/custlink/3GK3C581V0
T12 Iron Tips: www.banggood.com/custlink/3DG3CHZ1SD
Daniu Tip Cleaner: bit.ly/31VHwWM
KSGER T12-BCM3 Tip: bit.ly/2xgYXCQ
-------------------------------------------------------------------------------------------------
Microscope Equipment:
Eakins Barlow Lenses: bit.ly/3aBY5tR
Eakins Black Microscope: bit.ly/2VEcYaW
Eakins Camera Microscope: bit.ly/2x86hnT
Camera Adaptor for Microscopes: bit.ly/2KBZQMQ
Amscope Microscope Head (US): amzn.to/2YmZWNx
Amscope Trinocular Microscope (US): amzn.to/2YdBE8k
Amscope Trinocular Microscope (UK): amzn.to/2V8w9Gh
Swift SS41-WF20 Binocular Microscope US: amzn.to/2VLWEpb
Swift SS41-WF20 Binocular Microscope UK: amzn.to/2GYGYFV
Visit my website: www.sdgelectronics.co.uk/
-------------------------------------------------------------------------------------------------
#ElectronicsCreators

Наука

Опубликовано:

20 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@Itzz_Ewa Год назад

Finally one of the thinking manufacturers of soldering equipment that used rotary regulators read encoders for handling, temperature and air. I don't know why manufacturers gave up rotating adjustments that work quickly in favor of clicking on buttons where this adjustment time is difficult. Kudos to Aixun for the rotary adjustment. I'm getting rid of those push button hotair stations and buying an Aixun.

@ariewijaya1679 9 месяцев назад

But the quickest way to set temp and airflow is the calculator style button.

@strickos91 7 месяцев назад

The 26awg ground wire did not make avoid this product ?!

@Keiuran 6 месяцев назад

@@strickos91 Can it not be replaced?

@cdyoutoob Год назад

Looks to me those nozzles are intended to face down in the stand. That would make it easy to insert one into the handpiece single handed. Shame they didn't ship some angled nozzles.

@brianwood5220 Год назад

Yes, I thought that about the nozzles facing down to install 😀

@MrPolaris800crew Год назад

in all honesty i think you are the best RU-vidr reviewer for us Electronic geeks, keep up the good work.

@bobweiram6321 Год назад

On most hot air stations, you switch the heating element from 220V to 120V and vice versa by wiring them in parallel or series.

@dannyperry8070 6 месяцев назад

I purchased a JDI 863 from Ali. The issue is that I am in the US and max power I got out of it was about 450 watts. They did not make internal changes for 110v operation.

@davadoff 4 месяца назад

Did you order a 110v version? You need to replace or modify the heater in the handle to a 120v one and it should work normally (assuming the internal wiring like shown in this video is not too thin).

@th3drizzl378 Год назад

I love all my aixun stuff and i have Almost the entire lineup but this one didn't Impress me nearly as much as i hoped. in fact my modded best bet is back on my desk now VS this one. maybe with a little time it will get better and they need to release a proper 110v unit

@hervedonner1864 Год назад

Thanks for all you do. Aixun just released a new T320 station, it would be amazing if you could have a look :)

@TheEmbeddedHobbyist Год назад

A[ways nice to see that all the hard work I put into getting equipment through the CE marking process, is not being copied by the overseas sellers. I'm surprised how many UK companies still chose to ignore the wrongly marked "ce" and pass it off as "CE", when will we see a UKAC clone marking.

@ServiceRoom Год назад

Хорошая станция тоже сегодня получил.

@kml1699 11 месяцев назад

i had used couple to cheaper hot soldering station but QUICK 861DW is best for me had been using since 4 years no any issue. i am very happy with 861Dw

@brianwood5220 Год назад

Nice little unit, but it could do with a few improvements mainly the things that you've mentioned. Such as, the short tube, and the lack of decent earthing. Overall though, it's a nice looking unit. One which I think Would fit well with my current equipment quite nicely. Thanks for sharing, Steve.

@sdgelectronics Год назад

@hitechmaster69 Год назад

Hi dear, do you know why it doesn't connect with bluetooth to the pc? Please I need to understand how I can fix this. Thank you in advance.

@hitechmaster69 Год назад

Hello dear, sorry, were you able to connect the bluetooth with the app? I've tried many ways, but the app downloaded and updated from the official aixun website just doesn't connect... You know how Can connect to pc and see it on big screen? Thanks for the explanations... 👍🏻🔝

@bodacious2276 Месяц назад

Which one would you recommend, this station or the Atten ST-862D?

@NicksStuff 5 месяцев назад

So the smart functions didn't really work. Have they improved since?

@Hi-Fi_Surgery Год назад

Aixun H310D or Sugon 8650?

@LTronicaAssistec Год назад

sugon 8650

@idr3aming_inc 7 месяцев назад

Most of sugon always faulty on sensor issue

@Keiuran 6 месяцев назад

Get the Atten

@phuang3 Год назад

What was the temperature and fan speed at 23:40? I'm interested in this hot air station.

@travisfrost6508 Год назад

There is no 110v version. I asked aixun and ordered this one anyway. Also for a 110v to 220/240v step up transformer

@bobweiram6321 Год назад

Take apart the handle and check the heater wiring. On some of them, you can rewire it from series (220V) to parallel (120V).

@GenerationXT Год назад

I like the handpiece, but there are simply too many bugs. The wire they used inside makes me question whether this unit is even capable of 1000 watts.

@jeffrbake 4 месяца назад

I use their soldering station, this seems like it may be the same value proposition

@SuperRealhigh Год назад

Can you please review Aixun p3208 power supply

@VoeViking 8 месяцев назад

If it needs an app I don't want it.

@espenhansen4791 Год назад

Seems like Aixun copied JDI 863, and installed their own software on it. Actually GUI from JDI looks better. But Aixun is good at firmware upgrade. So they may redesign the look soon.🙂

@timturner7609 9 месяцев назад

5:25 turn it over. Tips go in the other way round so you can simply push them on

@HwAoRrDk Год назад

20:21 Long press MENU to save what value?!? 😆

@thomasleerriem6872 10 месяцев назад

Chinese device with WIFI. That's a red flag right there.

@dannyperry8070 6 месяцев назад

The JDI 863 Looks exactly the same just different colors.

@JustinDavis-c3f Год назад

There is no 110v for this device. it only comes 220v

@antibrevity Год назад

That's a seriously half-baked UI and it really detracts from AiXun's brand. They seem to want to build a name, but aren't paying attention to the details. There's just no excuse for not grounding properly or using proper gauges when they've otherwise gone to the trouble of tidying the wiring and it would seem a lot higher quality if they quieted the blower as other brands do. This is disappointing for the price. While the handpiece and stand are good enough, the base station and UI are just unfinished and bad; good intentions, poorly executed.

@davadoff 4 месяца назад

They can’t be trusted to make anything with mains wiring. More or less all AliExpress manufacturers are like that.

@TheFelix63 Год назад

It's not easy to replace that yellow ground wire, but assuming you replace it you void the warranty, so you should keep it as is

@AbulKalam-ie2pf Год назад

hello sir, I am from Bangladesh, I want to know about this hot gun. someone said it need to activation every year. it's right or wrong? can you answer me please.

@Hi-Fi_Surgery Год назад

I'm little disappointed about the hardware build quality, expected linear power supply for the logic and fan

@jaro6985 Год назад

Zero benefit for a linear PSU here.

@Hi-Fi_Surgery Год назад

@@jaro6985 durability

@JohnDoe-wb7ng 5 месяцев назад

@@Hi-Fi_Surgery please elaborate

@davadoff 4 месяца назад

@@jaro6985 he probably means transformer based PSU.

@davadoff 4 месяца назад

@@JohnDoe-wb7ng It makes sense to use a transformer. Since it doesn’t have to run the heater, it can be small and cheap. I wouldn’t trust those Chinese ‘homemade’ switchmode PSUs as far as I could throw them.

@macakcat Год назад

looks like the ac voltage is rms

@Manawyrm Год назад

no, that 230V/240V figure we usually give over here is already RMS. our mains is 325V peak... so yeah, the reading is way off, I'm hoping it isn't using that for any kind of regulation.

@adredy Год назад

design of menu is like 5£ smartphone :)

@khantelecom7815 Год назад

MD HASAN KHAN INDIA INDIA KOLKATA

@khantelecom7815 Год назад

Nice VEDIO

@khantelecom7815 Год назад

PCB WAY NOT ODER PLICE HELP ME

@IanScottJohnston Год назад

I think the nozzles store up the other way (per photos on the web) so that you can remove a nozzle as you had shown but then insert a new one even whilst hot. EDIT: Oh!.....@cdyoutoob beat me to it....:-)