SDG

Подписаться 48 тыс.

Просмотров 6 тыс.

50% 1

PCBWay 3D Printing and Fabrication: www.pcbway.com/rapid-prototyp...
Miniware MHP50: s.click.aliexpress.com/e/_DCJ...
UGreen GaN Charger: s.click.aliexpress.com/e/_Dkm...
Pico Technology 5000 Series Scope:
www.picotech.com/oscilloscope...
Support the Channel with Patreon: / sdgelectronics
----------------------------------------------------------------------------------------------------------------------
0:00 Introduction
2:23 User Interface
4:38 UGreen GaN Charger
5:21 Heatup Speed
7:06 Reflow Profiles
10:09 Reflow of Copper LED PCBs
12:04 Disassembly
14:11 Final Thoughts
----------------------------------------------------------------------------------------------------------------------
Zigbee Stuff
mmWave Sensor: s.click.aliexpress.com/e/_Dl7...
Sonoff USB Dongle: s.click.aliexpress.com/e/_Dmi...
Zigbee Hub: s.click.aliexpress.com/e/_DBp...
----------------------------------------------------------------------------------------------------------------------
SolderKing UK Made Solder: solderking.com/
SolderKing UK Made solder available at Kaisertech:
UK JBC Distributor kaisertech.co.uk/ Discount Code: "SDG5"
----------------------------------------------------------------------------------------------------------------------
3D Printers:
Ender 3 S1 Pro on AliExpress: bit.ly/3Tfiz22
Geeetech Mizar S on AliExpress: bit.ly/3MN0c0M
Artillery Genius at Banggood: bit.ly/32iG2dv
Geeetech Mizar S on AliExpress: bit.ly/3MN0c0M
Geeetech A20M at Banggood: bit.ly/2YooVll
Geeetech A20M at AliExpress: bit.ly/3oBqo2I
Geeetech PLA+ Filament: amzn.to/3gelSX1
Ender 3 V2 at Banggood: bit.ly/36lN8Ny
Ender 3 V2 at AliExpress: bit.ly/3j1C2CO
-------------------------------------------------------------------------------------------------
Soldering Tools and Equipment:
Aixun T420D On AliExpress: bit.ly/3cQXXhh
Aixun T3B on Aliexpress: bit.ly/3CHerj1
Aixun T3B on Aliexpress: bit.ly/3cDkWIY
Aixun T3A on Aliexpress: bit.ly/30LDcgG
AiXun T3A on Aliexpress: bit.ly/2VdRVhU
Yihua 853A Preheater: www.banggood.com/custlink/DGD...
Youyue 946C Hotplate at Banggood: bit.ly/2MuLwqM
Youyue 946C on AliExpress: bit.ly/374v3Tp
Solder Paste: bit.ly/2E1P5jR
Solder Flux: bit.ly/2MQn7we
Quick 857DW+ Hot Air Station: bit.ly/2OWDvf4
T12 Soldering Station: www.banggood.com/custlink/3KK...
AC Version: www.banggood.com/custlink/3GK...
T12 Iron Tips: www.banggood.com/custlink/3DG...
Daniu Tip Cleaner: bit.ly/31VHwWM
KSGER T12-BCM3 Tip: bit.ly/2xgYXCQ
-------------------------------------------------------------------------------------------------
Microscope Equipment:
Eakins Barlow Lenses: bit.ly/3aBY5tR
Eakins Black Microscope: bit.ly/2VEcYaW
Eakins Camera Microscope: bit.ly/2x86hnT
Camera Adaptor for Microscopes: bit.ly/2KBZQMQ
Amscope Microscope Head (US): amzn.to/2YmZWNx
Amscope Trinocular Microscope (US): amzn.to/2YdBE8k
Amscope Trinocular Microscope (UK): amzn.to/2V8w9Gh
Swift SS41-WF20 Binocular Microscope US: amzn.to/2VLWEpb
Swift SS41-WF20 Binocular Microscope UK: amzn.to/2GYGYFV
Visit my website: www.sdgelectronics.co.uk/
-------------------------------------------------------------------------------------------------
#ElectronicsCreators

Наука

Опубликовано:

2 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@sdgelectronics Месяц назад

PCBWay 3D Printing and Fabrication: www.pcbway.com/rapid-prototyping/ Miniware MHP50: s.click.aliexpress.com/e/_DCJTfub UGreen GaN Charger: s.click.aliexpress.com/e/_DkmQWKj Pico Technology 5000 Series Scope: www.picotech.com/oscilloscope/5000/flexible-resolution-oscilloscope Support the Channel with Patreon: www.patreon.com/sdgelectronics

@Galileocrafter Месяц назад

Now it’s big enough for keeping the coffee warm :)

@miniware Месяц назад

Thank you for your review. When you use USB-C power supply to restart the reflow, it should be that the power of the power supply is not enough. You can adjust the PD power limit to about 130W in the menu, and it should not restart.

@vincei4252 Месяц назад

Well, I wasn't even half way thru and I bought one. Thanks!

@gregclare Месяц назад

Nice review. This seems to deliver on the promise of their earlier smaller unit, which always seemed like it really didn’t have what was really needed.

@TheEmbeddedHobbyist Месяц назад

i could do with one, but for the limited use they are a bit pricy. keep looking for a lab hotplate to come up cheap as they are a bit more versatile. have been thinking of getting a steel plate and putting some cartridge heaters on it, this might work out a fun project. still working on the heat isolation from the plate to base bit.

@thobiasmartin4768 Месяц назад

The UYUE 946 1010 Is very nice for the price, I modified it to have the control base seperate from the hotplate to lower it on my bench and it works flawlessly for me.

@teslatrooper Месяц назад

I've been using my MHP30 to reflow small boards, with IronOS it can also do reflow profiles. Funnily enough it also has an issue where sometimes it stops during the initial ramp up (before 100C). I'd probably get this one if I was in the market for a small hot plate now.

@philipgiacalone5605 Месяц назад

Thanks for the nice video review. Can you please explain why the boards need to be moved off of the hotplate before it cools down? Can't they be left there until everything has cooled down?

@sdgelectronics Месяц назад

Most electronics components aren't rated to remain at high temperatures for anything longer than a typical reflow profile.

@IanScottJohnston Месяц назад

The cooldown part of the reflow cycle is quite important to help avoid thermal shock and to get the best joints. You don’t have to wait till ambient though, I found 70degC is enough.

@sdgelectronics Месяц назад

@@IanScottJohnston The hotplate takes around 10 minutes to drop to 100C and for some reason doesn't spin at maximum speed for very long. I think there are still some firmware tweaks needed.

@neiliewheeliebin 16 дней назад

@@sdgelectronics 10 minutes is ridiculous i thought the fan was supposed to ramp its profile down, i was just about to buy one but i think ill wait a while longer until they release a firmware

@pn8902 Месяц назад

E-design told me a 40mm heating element and tin pot are in the plans when I emailed them (2021) about buying replacement 30mm elements in case the surface got damaged, for the MHP30. Wonder if the tin pot is still happening, probably can now that this higher power device has released otherwise I was wondering how the mhp30 base could support a tin pot as a replacement module for the 30mm hot plate

@cdyoutoob Месяц назад

You need to be able to set/limit the rate at which the temperature rises during normal 'heat' mode. Rising too fast might seem like a good idea, but it can destroy stuff you might need to heat at a particular rate.

@Gabriel-pf5pu Месяц назад

thanks for the review! what is your opinion on brass vs aluminium heatplate?

@sdgelectronics Месяц назад

From what I can see the nano coating on the brass hotplate is easier to clean. No performance difference though.

@TheDefpom Месяц назад

nice to see buttons on the front, I really disliked the rear buttons on the MHP30 which i found made it much harder to use.

@FriendlyIntentions Месяц назад

That's the same DC jack as the TS100 Iron, ive been looking for it as well, no luck yet :(

@Peter_A1466 Месяц назад

About those 60 layer PCB's... What type of project requires a 60 layer Printed Circuit Cube? 😄

@sdgelectronics Месяц назад

I also wonder how many orders they've had for such a thing!

@Peter_A1466 Месяц назад

@@sdgelectronics would also require an interesting soldering profile

@r7boatguy Месяц назад

I love my MHP-20, but I just bought a 946C, so maybe have to hold off on getting this one. If they made a 75mm version, I think that would be ideal for my needs.

@SpyderBDM Месяц назад

Did the USB-C max power get bumped up to 150W in the beta firmware? I’ve had one of these for a couple of months and it maxes out at 100W with USB-C and 150W with DC 5525. This is per the manual, device UI, and my personal experience.

@sdgelectronics Месяц назад

Yes, the firmware updated the USB-C power ratings. It's supposed to be released very soon.

@TorchHacker Месяц назад

It can be a bit difficult to find the right power supply for these hot plates. I bought a compact Belkin 65W power supply for a MiniWare MHP30 and it would constantly restart when it started heating up. I ended up using a PinePower Desktop power supply. Similarly the MiniWare TS80 requires a QC3 power supply. My USB-C PD power supplies don't work with the TS80. I gave a TS80 to a friend but forgot about the QC3 requirement... doh. Now they need to get a new power supply.

@sdgelectronics Месяц назад

That's why I ended up getting the ugreen power supply. Hopefully that should cater for everything unless a new standard comes out.

@neiliewheeliebin 16 дней назад

I power my MHP30 with the same Belkin 65w all the time, just set the power limit to 60w in IronOS firmware.

@TorchHacker Месяц назад

Is the temperature across the plate of the MHP50 consistent? I bought a cheap hot plate branded as "MHP30" (clearly isn't the MHP30) and the temperature varies wildly between the middle and edges.

@sdgelectronics Месяц назад

It shows about a 3°C difference across the plate, so it is pretty good.

@TorchHacker Месяц назад

@@sdgelectronics Thanks for replying! The quality sounds good.

@jaro6985 Месяц назад

Normally I see the high current shielded style barrel connectors. Though this only needs 6A so its not crazy high. But this style should be cheaper to make. Odd nothing on LCSC like this I saw thats through hole.

@norm1124 Месяц назад

Did anyone try to regulate a cooking plate with the "IronOS" ? This would give a WAY bigger area :D

@Peter_A1466 Месяц назад

Or maybe a flat iron?

@markjones9180 Месяц назад

Any recommendations between the aluminium vs brass versions?

@sdgelectronics Месяц назад

I don't think there is any performance difference. The brass version is supposed to have a nano coating to help clean the hotplate.

@acoustic61 Месяц назад

I think I'd want something larger.

@ajacocks Месяц назад

Apparently there’s a brass alloy version, as well. Have you tried that version?

@sdgelectronics Месяц назад

I've not tried the brass version. I don't imagine much performance difference, I think the main difference is the nano coating to make removal of flux and other residue easier.

@ajacocks Месяц назад

@@sdgelectronics thanks.