Very good and very informative. I absolutely love all the tech Tips on all your videos. I always learn something on every video you post. Thank you Calas. Aka Sea-Doo Master!
You make the most informative videos, as a technician my self it’s awesome!! I wish our Canadian dollar wasn’t so low in value I would love to buy our camshaft and your other parts
Hello, please tell me, I bought the block head, apparently it was overheated, as you said, the shaft on the last neck bites a little, what is your opinion, will it work? Thanks
I've rebuilt maybe 75 engines over the years, and one thing I always do is Plasticgauge the main, and rod bearings before I close it up. I've had so many machine shops screw up my cranks, and cylinder specs for new pistons. And I used a couple top race engine building shops all over the country, and they still screw up things. I don't trust anybody's machining work these days.
I am building a 2011 RXT 260. I am using the same Wiseco Pistons. Do you have any recommendations for ring end gaps size or should I say Tolerance.? Or should I go by manufacturer tolerances? Your input would be greatly appreciated.. I've learned a lot from you in this present build, and I'm doing. Thank you again, and i look forward to your response. Keep up the good work.
Hola Ernesto, tengo dos rxpx 300 uno es 2022 y el otro 2023, tienen muy pocaas horas de uso, menos de 15 cada uno, pero no llegan sin cerca a la velocidad que dicen en internet, como vivo en colombia no les he podido hacer el reset del aciete, pero a las 10 horas se los cambie, sera que la falta del oil reset los esta afectando en la velocidad final,,, gracias
hello i have a 2002 gtx 4tec limited ran great. then one day i put the key to the post and i got one long beep. checked the fuse box and found 5amp fuse bad. replaced it but as soon as i put the key to the post it pops and i get one long beep. any info you have about this problem would be great. thanks
Appreciate the knowledge. I know it takes a lot just to do the work. But to do the work and make the films plus everything else takes way more. So thank you for this!
There’s a reason why the seadoo engineers design a bolt that is skinny in the middle so the oil can reach the rockers the ARP bolts that I seen are fat I just don’t like them, if ARP comes out with a bolt that looks like the factory one then I use it.
