Sealmate Fork Seal cleaner / Try this before you pay for new seals!. 

Good video and camera work. Nice that the upside down forks will allow oil to wash the contaminates down the tube and out of the fork leg. One suggestion would be to re-seat the fork seal before you slide the dust seal back in place. Oil will weep out during the re-seating process and get trapped under the dust seal and attract more dirt. After the re-seat shows no oil coming out of the fork seal, clean the tube, inside of the dust seal, then re-seat the dust seal.

I saw Mark Victor uses this in bikerbits some years ago.. Works brilliant. Used a homemade one on a mv agusta and its not leaking yet. Have a nice weekend mate🍻🍻

Really appreciate that mate, thanks 👍

Handy tip mate 🤙

Thanks for the reminder

I make my own out off plastic bottle dose same job 👍

That oil looks mixed with water

A bit more involving but ideally on upside down forks the process should be done with the forks out and the other way up. Your fork oil looks contaminated with water.

cheers for that, mine has slight misting on same bike as yours so will give this a try 👍

Nice one Billy! 👍

hi.. you need change the fork oil because is white and foaming, use synthetic oil like Motul Factory Line or Motorex Racing Lab.

I sometimes wonder if adventure bikes would be better with conventional forks. Where you don't get as much dirt and muck spayed onto the inner slider.

....and if they do need replacing, our mate round the corner does them..... he did Mine last week!! Wish you did this vid earlier!

hmmmmm.........pump that susension Billy...boom chica wahwah!

The best tip ever!

but y not leave it alone, not sure if this is worth it, ? is it a bandaid if u hav damaged forks alrady, or is it proven to keep ur forks alive and going? not just interested to clean them like that, when i hav 2replace them soon? thanks

Yhis works , and if the seal hasnt sealed , clean it again and pump the forks until you get no leaks