Seam Line That Dont Want To Go Away : Tutorial

Подписаться 83 тыс.

Просмотров 20 тыс.

50% 1

Website for more content: www.genessis-models.co.uk/
Modeling Store for kits & tools: www.genessis-models.co.uk/shop/
Sub Channel: / @genessismodelsextra
------------------------------
To be able to view all the videos from step by step, Tutorial, Reviews and much more please visit our website here : www.genessis-models.co.uk
---------------------------
Genessis models is for anyone interested in modelling from beginners to advanced modellers, for those with an occasional interest to the over-the-top enthusiast!! The Genessis Models website is a great way to socialise and interact with fellow modellers.
Here you can pick up tips, tricks, and a range of techniques to build your next masterpiece as well as share with others what you have learnt along the way.
You can upload your own pictures of your work on the Discord and receive comments from other members on our Discord channel, it does not matter what area of modelling you are in all are welcome.
-----------------------------
Facebook: / 236019663086883
Discord: / discord

Хобби

Опубликовано:

3 июл 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@cdfe3388 Год назад

I never would’ve thought of doing it that way. Thanks, Bob!

@pawpawstew 2 года назад

I can't tell you how many times I've chased seam gaps. This video is a light bulb moment for me, Bobby. Thanks for sharing this tip! 🤜👍🤙

@genessismodels 2 года назад

Glad it was helpful!

@dah9093 2 года назад

Great vid. Wouldn’t be bored by a filler vid at all. In-fact, I’d love to know when and why to use the numerous fillers that I own. From Mr Hobby alone, I have Mr Putty, Mr Putty R, Mr Dissolved Putty, 1200, 1000 and 500!!!

@stevejesus6525 8 месяцев назад

My tip: before cementing the fuselage halves , sand a very fine bevel on the top edge of each half . Then after the glue sets you will have a nice micro recessed gap for your filler

@genessismodels 8 месяцев назад

Great tip!

@cosmarendy8417 2 года назад

Thanks for an informative video as usual. For a relative beginner, this is great.

@tcandle695 2 года назад

Good tip. I make my own filler mixing CA glue with baby powder or corn starch. Thanks for your videos.

@Model770 6 месяцев назад

Nice tutorial ❤

@genessismodels 6 месяцев назад

Thank you! 😊

@daniellabra4186 Год назад

Another suggestion for gaps such as these ones: Mix some CA with nail acrylic powder. It's an excellent filler, doesn't shrink and can be filled without problems. But, please, test it before with some scrap parts or model.

@DavidMarzola 2 года назад

Very nice presentation. Learned something new. Thank you

@genessismodels 2 года назад

Glad it was helpful!

@JDK16 2 года назад

As you mentioned, if it's a seam gap on the top of the spine or similar area, you have to be real careful not to sand away plastic as the CA is going to be harder. For those areas, I recommend sprue-goo, sprue plastic dissolved in Tamiya extra thin or similar. I actually use Tamiya Airbrush Cleaner.

@davidcole333 2 года назад

very helpful!

@deltic5514 2 года назад

Home brew filler sprue and glue, like JDK16 says, sticks like xxxx to a blanket and as its the same plastic as the kit you don't run risk of shrinkage etc. And its cheap.

@nicolaisen1 2 года назад

CA doesn't shrink from reaction with solvents. Awesome filler on its own or mixed with dental resin powder.

@raymondmoore8320 2 года назад

Nice bit of info,thanks for the video.

@genessismodels 2 года назад

No problem 👍

@joseluiscastanorestrepo 8 месяцев назад

Great technique

@trikkke11 4 месяца назад

needle 48th is a walk in the park

@jimplaysric 2 года назад

I've only ever used Tamiya white putty for filling so far, there are a lot of other good products out there I haven't used yet, but for Tamiya white I think you want to leave it set for at least a day.