Secret Use of a Drill Chuck !

Подписаться 1,2 млн

Просмотров 476 тыс.

50% 1

Secret Use of a Drill Chuck !
NEW BRIGHT IDEA
----------------------------------------------------
• Top3 Don't Throw Away ...
• Video
• AMAZING! Top 3 Bright ...
• AMAZING! Top 2 Ideas f...
• AMAZING! Bright Idea f...
• Video
The Secrets of Welding! • Secret Profile Pipe! W...
-----------------------------
AMAZING! Top 3 Bright Ideas!
-----------------------------
• AMAZING! Top 3 Bright ...
• AMAZING! Top 3 Bright ...
• Top 3 Bright Ideas wit...
Idea With a Drill !
-----------------------------
• Bright Idea With a Dri...
• A Ttricky Secret for a...
• Bright Idea With a Dri...
Idea of the Bicycle Hub!
-----------------------------
• Bright Idea With a Dri...
• Awesome Device of the ...
• Bright Idea from the O...
Idea With Angle Grinder!
-----------------------------
• Bright Idea With Angle...
• Bright Device of the A...
• Bright Idea with an Ol...
Top Ideas !
-----------------------------
• Bright Idea With PVC P... - Idea With Plastic Canister!
• AWESOME IDEA! HOW TO T... - TWIST ELECTRIC
• Bright Idea With a Dri... - Idea With a Saw!
• AMAZING Idea With an Ax ! - Idea With an Ax
Other Creative Ideas
-----------------------------
• AMAZING! Bright Idea f...
• Secret Use of a Drill ...
• Bright Idea With Drill...
• Bright Idea With an Ol...
• Brilliant Idea With An...
• A Brilliant Idea With ...
----------------------
Welcome to Fixotronic channel:
Our channel includes such videos
- Life hack
- DIY
- How to make
- Awesome ideas
--------------------
Music:
Stacy and George
Marvin's Dance

Опубликовано:

19 авг 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 89

@unciberguenza 4 года назад

Excelente... Muy impresionante

@electronic7979 4 года назад

Nice project 👍

@manojvalayanad. 4 года назад

Wonderful creativity. Best wishes.

@BengtRosini13 4 года назад

Dude, did you know that you can remove the chuck from a drill without destroying the spindle?!

@justinformeyou1100 4 года назад

Asshole was so excited that he lost his mind.. 🤣🤣🤣🤫

@ylmazaydn 4 года назад

Çok güzel olmuş.Ellerine ve bilgine sağlık.

@efrainsanchez3161 4 года назад

Saludos desde MTY NL

@daguimacio 4 года назад

Gostei,vou fazer um para mim.

@efrainsanchez3161 4 года назад

Hola sorprendente con esos ingenio

@surfinmuso37 4 года назад

You had me at a cat in a bucket....7 seconds in and i'm laughing.

@jonnyshoestring9368 4 года назад

A clever idea in using old parts that are lying around. 👏

@vicentefernandez3930 2 года назад

Como ocurrencia no está mal.

@razonoira 4 года назад

excellent tool , very good

@ramirolopesandrade1955 4 года назад

vERY GOOD IDEIA .......... A HUG FROM PORTUGAL

@ashrafkassim2688 4 года назад

EXCELLENT SIR

@MrRaleman 4 года назад

Muy útil para una emergencia, en lo que compras un porta electrodo

@lucasfurtado 4 года назад

funcionou bem

@edgarferreira4577 4 года назад

Vc tá com tempo em amigo. Bem mais fácil e seguro ir na loja comprar uma garra ... Cada coisa...

@michelemsheimer2203 4 года назад

Edgar Ferreira armes

@noelguerrero2770 4 года назад

Neat idea!!

@rodrigoarevalo5865 4 года назад

Muy bueno

@luiselect5024 4 года назад

Muy buena idea 👍

@b.j.555 4 года назад

Good idea

@MrWayneploof 4 года назад

pretty cool idea

@karlalton3170 4 года назад

Fkg well impressed with that one dude 👌👌👌👌

@danielhall1226 4 года назад

I want a cat bucket. Lol

@ylmazaydn 4 года назад

Bu kaynak kablosunun uçlarını elektrik fişine nasıl bağlıyorsunuz acaba? Yine kablo içindeki bakır telleri iki kısma ayırıp mı bağlıyorsunuz acaba? teşekkür ederim.

@nakoawarrior3186 4 года назад

kool

@user-bb6sj7yk4u 4 года назад

Это случайно не адвокат Егоров? 😉

@fabiobarrionuevo1471 4 года назад

No esta mal. Pero no será muy pesado?

@yegorburov5881 4 года назад

Отлично!

@edvonschleck7187 4 года назад

Tolle Sache aber wo kommt der Strom her,Pkw Batterie?

@yegorburov5881 4 года назад

@@edvonschleck7187 Сам ты хер.

@vivianeviana9137 4 года назад

Forma e informal

@pedrotome9119 4 года назад

Holla! Es real que esto resulta en algo menos prático para quitar el eletrodo rápido quando queremos, pero yo en mis pequeños trabahos tengo tido más problemas con el elctrodo me caindo quando no lo quiero, do que no lo libertando ... Gracías por este vídeo!! por favor sigue postando!

@nathanscott1764 4 года назад

Now you have to unscrew the head to change rods instead of simply opening the grips by simply pressing the handle together. Neat idea but it creates more trouble than is necessary.

@SubramaniamLakshminarayanan 4 года назад

To the contrary, if you have used a welding grip for some time you'd know how frustrating it is to have the electrode slip away or change direction unintentionally.. A mere hand tight on the chuck will do well, doesn't have to be tightened with a key.

@58221 4 года назад

Good

@marciorodrigues3166 4 года назад

sow de bola em..

@958fuser 4 года назад

secret?...useful!

@sladeippie5841 4 года назад

Who thought the cat was gonna get it?

@losochenta9625 4 года назад

Eres un genio 👍👍👍

@agemirvassoler4819 4 года назад

muito bom e funcionalvou faser um

@chandradharkoneti 4 года назад

You're wearing the glove on the wrong hand.

@felipebarros3693 4 года назад

kkkkkkkkkkkk lol

@kenscott6162 4 года назад

commonplace for boilermakers to wear left hand glove

@chandradharkoneti 4 года назад

@@kenscott6162 what's the purpose?? Why left hand glove on the right hand?? What's the reason for that??

@kenscott6162 4 года назад

@@chandradharkoneti Left glove always on LEFT hand. That was the hand that held things in place while they were tack welded. A Also it was the hand that held the oxy cutter and was closest to the flame. If you haven't worked in a Fab shop you may not understand

@menap8884 4 года назад

Valeu guerreiro !❤❤

@fernandocastillo1035 4 года назад

genio¡¡¡¡¡ el gatito encima jugeton

@saadbahlol3276 4 года назад

Bad idea because it is heavy

@jetubeman173 4 года назад

Astucieux

@wagnercordeiro668 2 года назад

É bom mas você não colocou a onde é ligado o fio como é ligado o Terra

@mohammedzeco8006 4 года назад

Good idea, but it is too heavey to carry for along time

@cabezonrocco1440 4 года назад

Lo mejor que he visto en mucho tiempo,si la idea es tuya ? Felicidades buen trabajo bien echo, un abrazo

@blancaidalia1996 4 года назад

Cánçiones de bale ntin Elizalde

@gssmith1986 4 года назад

or you could drive to harbor freight and buy a 400 amp stinger for $13.

@gadjetramjet 4 года назад

...and also get something that won't electrocute you through the paint or that thin rubber!

@pietrovardi9583 3 года назад

Warning should be put: Do not try this at home, unless you want to lose fingers.. Mad Max?

@victo1992 4 года назад

Valla idea justo hoy se me rompió la pinza porta electrodo

@paulorodrigues3917 3 года назад

É é

@paulorodrigues3917 3 года назад

@obfuscated3090 4 года назад

The title got you the views you want but the idea is silly and a waste of a chuck you could put to better use for your welding projects and save buying a die grinder! Drill and tap that chuck to fit your angle grinder spindle and you'll put it to much better use as a weldor spinning flap wheels, wire brushes etc. There is zero logical reason to use a steel chuck as a welding rod holder. Besides poor ampacity and the large head, it's slow to swap welding rods compared to a clamp. Weld spatter sticks to steel and steel corrodes, hence the lack of steel rod holders! If you don't have a stinger the easy, fast alternative is use mole grips/vise grips instead. Tack weld a bolt to the back or side of your vise grip head, crimp a lug on your cable (if you have no lugs you can make one in minutes from a short piece of copper plumbing tubing), drill to suit and secure to bolt with a nut.

@justinformeyou1100 4 года назад

Vitch of a sun.. 🤣🤣🤣

@paolocarnevali7572 4 года назад

Ma che razza di idea è? Il saldatore elettrico ce l'ha già, l'ha usato poco prima per costruire quel trespolo!! Mi pare una cosa estremamente inutile!

@peteperez2941 4 года назад

What is your power source ?

@paullainhart8288 4 года назад

Uhh hello we're all grown men here. You know we take our power from anger,hatred, the left feet of grey kittens, and the women as they sleep. Havent you been artending the meetings? How do u not know that?

@patrickkane7207 4 года назад

@@paullainhart8288 he asked you a question ?

@paullainhart8288 4 года назад

@@patrickkane7207 and i gave a bullshit sarcastic half answer

@AngelDragon1979 4 года назад

Was ist das für ein Kabel?

@adad-nerari4117 4 года назад

I find that it isn't worth to sacrify a chuck for an electrode holder ...

@mariogonzalezjimenez8999 4 года назад

Muestrame la instalación eléctrica pues no aparece

@washeforever978 4 года назад

А ЭТО лечится?

@netcomptech 4 года назад

You have only showed another way of doing something but how is this better? Reinventing the wheel happens every day but the goal is to make a better wheel not one that is more costly in materials and/or time.

@JoseRodriguez-yb4ok 4 года назад

No estás mostrando Cómo ponerle la corriente si me podrías decir cómo

@MrRaleman 4 года назад

Creo que esta usando una planta de soldar

@tenncutt 4 года назад

Cartridge??? Its called a chuck

@adiyogi453 4 года назад

Too much Noise, could not see full video

@user-jg4zk2em6m 4 года назад

Грется будет

@paulorodrigues3917 3 года назад

Não

@kareno8634 4 года назад

NICE Idea! But PLEASE, someone, EXPLAIN The ELECTRICAL CONNECTION ~ Makes No Sense. =\

@pipelinerskilllabro1659 4 года назад

Its good until you get to the end of the rod . then it'll melt the rubber and you'll have to wait till it cools down to change rods cause you for sure don't want to cool it down with water

@paulorodrigues3917 3 года назад

@pipelinerskilllabro1659 4 года назад

Good until you get to end of rod.HOT

@baked.9nion 4 года назад

Soon as I saw you chopping the chuck with an angle grinder instead of actually taking the drill apart I turned off...aint no engineer ideas here, just tripe