Тёмный

SECRETS AND MANUFACTURING DRAWINGS OF LIBERTY ENGINE 2.0. Spanish version 

Hidden Technology
Подписаться 673 тыс.
Просмотров 21 тыс.
50% 1

SECRETS AND MANUFACTURING DRAWINGS OF LIBERTY ENGINE 2.0. Spanish version
LIBERTY ENGINE 2.0 SEAMLESS PERFORMANCE TEST.
PLANS AND SECRETS OF LIBERTY ENGINE 2.0
The big energy companies have managed to ban our video, but we will continue fighting them and will republish this video on RU-vid as many times as necessary. Together we will make this world a better place.
Many subscribers have requested plans with measurements of the "Liberty Engine". They have also asked us for the electrical diagram. Others ask us to say the exact composition of the special alloy with which we have manufactured the rotor. And others have asked that we do more testing and take voltage, frequency and power measurements. Well, here you have the most anticipated video of the century. We hope you like it...
Please note that we cannot sell our prototypes, but we must warn you that we have detected several fraudulent companies that try to scam people by saying that they sell copies of our "Liberty Engine", but those copies do not work. BE VERY CAREFUL NOT TO BE SCAMMED
- English version of the video:
• Video
__________________
TURN ON SUBTITLES. THEY ARE TRANSLATED INTO SEVERAL LANGUAGES
INDEX:
00:00:00 Introduction
00:33:00 Questions
00:38:00 Question 1: Can you provide us with the electrical diagram of the "Liberty Engine"?
00:52:00 Question 2: What are the technical specifications and power consumption of the "Liberty Engine"?
01:34:00 Question 3: Can you show a high power load test?
19:06:00 Question 4: What are the specifications of the transformers?
19:35:00 Question 5: Can you show the mechanical drawings of the "Liberty Engine 2.0"?
20:01:00 Question 6: Can it generate 110 volts?
20:26:00 Question 7: What are the dimensions of the rotor?
20:51:00 Question 8: What are the dimensions of the magnets?
20:58:00 Question 9: What is the exact rotor alloy?
21:33:00 Question 10: How can we buy a prototype?
22:28:00 Question 11: If they are patented. Don't they expire after 20 years?
23:24:00 Thanks
__________________
If you want access to see the full uncut video of this "Liberty Engine" performance test, you must become a Channel Member. Only then will you be able to enjoy this exclusive content:
- Spanish version: • PRUEBA DE RENDIMIENTO ...
- English version: • LIBERTY ENGINE 2.0 UNC...
- To become a member of the channel, click the following link:
💥 / @hiddentechnologyyt
- You can also collaborate with our projects by purchasing a product in our store:
💥 www.youtube.co...
Follow us!
💥 Private Telegram channel: t.me/hiddenTec...
💥 Facebook Channel: / hiddentechnologyyt
We want to thank all our channel members, but especially the Elite members:
- seduction
-Diyson
- harpinKeith
THANK YOU!
__________________
Purchase links on "Amazon":
- Air heater 3000w 220v: amzn.to/3OHJbKb
- Energy meters: amzn.to/3IG1njL
- Engine starter: amzn.to/3OExynf
- Transformer for the Leds: amzn.to/435QSOK
- Digital multimeter: amzn.to/43nrW4Y
_________________
Warning: The use, copying, manipulation or transmission of this video or part of it without the consent of the author is strictly prohibited. This video is protected by copyright.
_____________________________________
Contact: libertyenginebusiness@gmail.com
_____________________________________
HOW WE RECORD OUR VIDEOS
- Sony RX10 IV: amzn.to/3HnF69l
- GoPro HERO11: amzn.to/3Hm0BHz
- Insta360 One RS Twin Edition: amzn.to/3Oaalbo
- iPhone 15 Pro Max: amzn.to/3U6TJ8h
- 72" Aluminum Tripod: amzn.to/48G1FBX
- Smartphone Tripod: amzn.to/3HrCKpI
- Screen batteries: amzn.to/3IgeoRt
- Screen for Sony camera FEELWORLD F5 Pro V4: amzn.to/3SpfOhc
- Articulated arm: amzn.to/3S32BcI
- HDMI adapter for iPhone: amzn.to/3vH5dFz
- Bresser Pantograph F001483: amzn.to/3MUW16t
- Microphone BOYA: amzn.to/48G2omF
- Illumination spotlight kit: amzn.to/3O5OJx5
Free Energy, Infinite Energy, Free Energy, Energy Generator, wind turbine, alternator to generate electricity, brushless generator, free electricity, free energy, free electricity, electric generator, generate energy, generate homemade electric energy, perpetum mobile, Hidden technology, generator infinite energy with microwave transformers, free energy generator 20Kw, free energy generator, free energy, liberty engine, long test

Опубликовано:

 

21 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 84   
@osmanyolivera-nc5uf
@osmanyolivera-nc5uf Год назад
Yo estaba muy contento por qué pense que de verdad querían alludar al mundo pero si no quieren dar la composición de la aleación del rotor no la podemos replicar su generador entonces toda la información que han publicado nos sirve de nada a los pobres con esa esperanza que nos habéis dado, no comprendo?
@mauavalos6173
@mauavalos6173 Год назад
Desde México y con el corazón❤, muchas gracias🙏💕 !!
@manuelcontreras1693
@manuelcontreras1693 Год назад
Bro estoy buscando algo asi estas trabajando en algo asi? Soy de mexico
@zlatamarkovic6649
@zlatamarkovic6649 Год назад
Жао ми је што незнам неки европски језик. Веома ме интересује пројекат.Браво!!!!!!
@yancoiarnauu3213
@yancoiarnauu3213 Год назад
Un pequeño paso para el hombre y el comienzo de la libertad energética y humana
@corien7
@corien7 3 месяца назад
Me a costado pero ya dispongo de los materiales y componentes necesarios para hacer uno de estos para mí Si todo va bien par afinales de vacaciones de verano lo terminaré de montar y empezaré las pruebas 👍
@marcs5784
@marcs5784 Год назад
MEGA MASTER! Herzliches Dankeschön das ihr dies zur Verfügung stellt. NAMASTE
@joelr88
@joelr88 Год назад
Una pregunta, si cuando le pones el tester no hay tensión. Y justo le das al botón de encendido de los enchufes porque se enciende. Si no hay tensión porque hace esa pequeña luz ?
@izabellecristini1720
@izabellecristini1720 Год назад
Esse motor é o máximo em energia livre gratuíta!
@avesgamal
@avesgamal 8 месяцев назад
Es admirable vuestro trabajo investigativo y lo que nos han regalado a la humanidad, espero algún día poder construir el generador y ahora que se viene el reseteo, es fundamental tener uno 🏆🏆🏆💯
@mr.viktor742
@mr.viktor742 Год назад
БЛАГОДАРЮ 👍👍👍👍👍👍👍👍👍💯👌👌👌❤❤❤
@osr2004snd
@osr2004snd Год назад
Al final no dan el dato mas importante: La composición de la aleación del rotor. Solo dicen que tiene % mayores de Ag y Al. Sin ese dato, ¿de que me sirve este video? Es como venir acá a ver el invento que jamás podré replicar yo mismo. Es peor que la Coca Cola porque nadie sabe la fórmula de la bebida, pero al menos la pueden comprar y tomarla. Aquí el beneficio es 0. Lo único que cabe es ponerse a hacer pruebas de error combinando proporciones distintas de Al y Ag a ver si se obtiene algún día algo cercano a esa aleación.
@harisubagio7715
@harisubagio7715 3 месяца назад
I just found a video of making a free energy generator that was successfully able to produce 12 kva pure power (load test), this is an extraordinary success. I want to ask how much it will cost if one day it can be produced and sold on the market. Thank You. 
@noxivoff
@noxivoff Год назад
Good work✌️👍
@metalmugen7801
@metalmugen7801 Год назад
Sino pueden verder el generador, vendan el rotor y haci ayudarian mas que con videos con infirmacion inconpleta. Cuanto pir el rotor?
@duanibrito1310
@duanibrito1310 Год назад
Tienes toda la razón ....,la idea de todo esto es que tu pagues un dinero por la suscripción, veas el video de lo que han logrado y se te llene la cabeza de ideas, mas no de posibilidades de poder hacerlo, como todo en la vida, es un negocio. Mi forma de pensar, aunque revelen las proporciones a utilizar de AG y AL, no garantiza a nadie que podrían lograrlo. En mi caso particular , estuve verificando los transformadores a utilizar y no aparecen, por Amazon encuentras algunos los que podría utilizar y su costo anda en unos US$ 200.00 cada uno y son 4, por otro lado el motor cuesta unos US$ 400.00, solo por señalar esas partes,............, pero, por US$ 1.99 dólares mensual, podemos seguir viendo los videos.....🤣🤣🤣🤣🤣.
@luizrobertodossantosdesous4002
Good afternoon friend, watching your video is very interesting but it has already been proven that there is NO way to do it that way, only if there is a SPECIAL MATERIAL that generates a 220v energy in the coils that no one is aware of, if you are going to do it this way that is in the video at most will generate 50v, what is the secret to generate a 220v
@alexanderkruger7419
@alexanderkruger7419 Год назад
Für den Rotor benötigt man Al-Ag Legierung und soll 7,4 Kg wiegen ohne Magnet, Kleber und Epoxidharz. Die Volumen ist 1073,3 dm³, also für die Al-Ag Legierung sind 46% Aluminum (3,404 Kg) und 56% Silber ( 3,996 Kg) = 7,4Kg. Haupsächlich sind die Silber Barren zum Schmelzen sehr teuer und kostet grob 1Kg 700-1000€. Wow Wahnsinn. Dann würde den Rotor komplett min. 4000€ kostet. So war meine Vorstellung, ich werde erstmal die andere Werkstoffe testen abhängig von Kosten und soll auch für jeden bezahlbar sein.
@danielstiller4810
@danielstiller4810 Год назад
Das Geheimnis liegt nicht im rotor sondern im „Motor“ der ist in Wahrheit der Generator. Das Magnet und Spulen gedöns kann auch mit einem dc Motor realisiert werden. Grüße
@밀루쨔응
@밀루쨔응 29 дней назад
상용화가 된다면 꼭 구입하고싶어요~!
@1010-x5k
@1010-x5k 11 месяцев назад
Exactamente que es lo que hace en el minuto 1:50? Para que levantó la pierna antes de poner la maquina sobre la mesa? La mesa es metálica y en una de las patas de la máquina podría hacer contacto con la mesa. Si tiene un interruptor que está conectado la corriente a la mesa, la mesa quedaría con corriente. Y si lo que hizo fue apagar el interruptor para que la mesa no quede con corriente para que pueda poner su maquina sobre la mesa sin que le pase corriente? Podría ser este un engaño no?
@PatricioManzoC
@PatricioManzoC Год назад
GENIAL, QUIERO UNO
@tranquilitybase6417
@tranquilitybase6417 Год назад
Are there plans available? Could I power a tiny house?
@MishuRechinul
@MishuRechinul 11 месяцев назад
How many percent aluminium and how many percent silver does the rotor contain???
@hvacstudent967
@hvacstudent967 Год назад
Reason I think 85% and 15% is - They Say Volume 1073.3 CM3 and Weight 7.6 Kilograms. Silver Mass Density: 10.49 g/cm3 Aluminum Mass Density = 2.7 g/cm3 I tried various combinations to see what made sense, silver, if you've ever held it, is denser compared to aluminum, right? So this motivated my initial assumptions and lead me to: 85% Ag = 6460 Kg / 10.49 G/cm3 = 615.824 cm3 15% AI = 1140 Kg / 2.7 G/cm3 = 422.22 cm3 Together 1038.046 cm3 Now don't forget magnets, they are apart of the volume too! Neodymium magnet Mass Density - 7.4 g/cm3 3.5mm * 12mm * 34mm = 1428mm3 = 1.428 cm3 * 24 = 34.27 cm3 34.27 cm3 + 1038.04 cm3 = 1072.316 which is off .09% from their value given above. Estimated/Approximated, that has to be damn close to the necessary mixture because aluminum and silver have such vast differences in mass density, and that's the only two primary elements they mention. Question I have is does anyone have the ability to melt and cast these two elements? I bet we can heat treat it out selves machine it our selves and do the test on this system all in about a weeks time.
@fernandosalaz3798
@fernandosalaz3798 Год назад
Interesting.. Must investigate further.
@hvacstudent967
@hvacstudent967 Год назад
@@fernandosalaz3798 Yea but the major cost is in the silver, that's a lot of silver 6-8K depending where you get it.
@fernandosalaz3798
@fernandosalaz3798 Год назад
What about cutting slots in an aluminum rotor to eliminate eddie currents?
@rafaelglobalsupport
@rafaelglobalsupport 11 месяцев назад
Intentaré fabricar uno exactamente igual, tengo los materiales, mi abuelo trabajó y se jubiló en industrias metalcore, repasaré los datos.
@nicolaestefanvayna9831
@nicolaestefanvayna9831 10 месяцев назад
Bun foarte excelent
@fabianbaquero731
@fabianbaquero731 13 дней назад
Es mi impresionado? Asi funcionaban los habitantes de tartaria, todos inventaban cosas eléctricas
@savvasgerm
@savvasgerm Год назад
Respekt!!!!Super Team 👍💯💯
@timeisnot-gj6yg
@timeisnot-gj6yg Год назад
Wspaniale
@metalmugen7801
@metalmugen7801 Год назад
Si me hago miembro podria optener los planos completos y replicar el generador? Y si es así cual de las cuatro tipos de membresía es la correcta?
@lucaslillycrap4762
@lucaslillycrap4762 Год назад
EL TITULO DICE: "SECRETOS Y PLANOS" PERO NO MUESTRAN NINGÚN SECRETO... EN UN VIDEO ANTERIOR YA MOSTRABAN COMO ARMARLO. ÉSTO ES UN ENGAÑO!!! SÓLO PRETENDEN CONSEGUIR SUSCRIPTORES Y QUE LA GENTE PAGUE UNA CUOTA SIN RECIBIR "SECRETOS"
@christopherjavierberoizadi3491
Los planos están en video, solo debes tener habilidad en tus manos y hacerlo. Por lo que veo el tipo utiliza 4 transformadores de microondas a los que les quitó un enbovinado, y para generar la rotación usa imanes de neodimio. No puedes tirar basura si por lo menos lo intentaste
@ulisesvilleda
@ulisesvilleda Год назад
El video dice para los simp para los esectisismo páguen membresia si quieren ver el vídeo sin edición ya que son una molestia si no crees en ellos
@lucaslillycrap4762
@lucaslillycrap4762 Год назад
@@ulisesvilleda podés traducir tu comentario al español y sin horrores de ortografía? No se entiende un carajo lo que decís....
@ulisesvilleda
@ulisesvilleda Год назад
@@lucaslillycrap4762 dice que agua de manantial limpia y llena de nutrientes necesarios para que no tengamos deficiencia cerebral y te hace falta algo de la vida del personal e institucional
@lucaslillycrap4762
@lucaslillycrap4762 Год назад
@@ulisesvilleda EMPEZÁ A BUSCAR AGÜITA DE MANANTIAL ENTONCES, TE HACE MUCHA FALTA!!! PORQUÉ NO HAS ACLARADO TU MENSAJE ANTERIOR? SERÁ QUE NI VOS LO ENTENDÉS?
@PaulGálvez-v4m
@PaulGálvez-v4m 6 месяцев назад
buenoas yo lo que quiero saber si estan a la venta y cuanto costaria porque eso de estarlo fabricando uno mismo no se sabe si funcionara quiero saber su precio y donde los venden
@eduardozerecero-qh8rr
@eduardozerecero-qh8rr Год назад
Respeto el asunto de secreto industrial, y estamos de acuerdo que se pueden meter en líos según nos cuentan por revelar la composición. Saber el volumen exacto y no solo el peso eso realmente mostraría que pueden ayudarnos. ¿Podrían sumergir en agua el rotor (Experimento de desplazamiento de Arquímedes) y darnos el volumen exacto? Eso ayuda mucho. Pueden?
@HiddentechnologyYT
@HiddentechnologyYT Год назад
Ya hemos dicho el volumen exacto
@eduardozerecero-qh8rr
@eduardozerecero-qh8rr Год назад
@@HiddentechnologyYT Chispas de verdad sin afán de ofender o molestar, solo confirma si es correcto este que ponen en los comentarios --> 1073.3 CM3 por que es lo único que veo de información al respecto, ya estuve leyendo y viendo todo. O esta en los comentarios de la versión en ingles? Gracias por tu amabilidad de tomar el tiempo en responderme. Exito!!
@gabrielch7276
@gabrielch7276 Год назад
Pueden no liberar la informacion directamente, pero por especular hay delito? 💡 Todos queremos un mundo mejor ..
@peter_player
@peter_player Год назад
claro que todos queremos um mundo melhor ! o problema é que enquanto as industrias petroleiras existirem e houver combustíveis fosseis, eles tem o monopólio da energia e não vão permitir uma energia limpa e gratis para ninguem... o mesmo aconteceu com motores que podem trabalhar com Hidrogénio, que já estão aceitando o facto que toda gente já sabe que é possivel
@Benkaynakci
@Benkaynakci Год назад
hello publisher, in my country, if you wish, we can produce and count this in the country. and there will be no problem. but financing is needed to establish it and make mass production. I am ready to do whatever is left.
@GeorgeSorosFDP
@GeorgeSorosFDP 9 месяцев назад
O que acha de utilizar plástico técnico "NYLON ou POLIETILENO" para fabricar o rotor? Acho que não vai gerar campo magnética nocivo.
@HiddentechnologyYT
@HiddentechnologyYT 9 месяцев назад
Isso não vai funcionar
@waldisusi
@waldisusi Год назад
Ich nehme so einen Motor, sofort.
@GeorgeSorosFDP
@GeorgeSorosFDP 9 месяцев назад
Boa tarde, posso utilizar ímã inteiro , com a medida dobrada 68x12x3,5mm, gostaria de saber também, se posso ajustar o tamanho do imã, cortando ?
@HiddentechnologyYT
@HiddentechnologyYT 9 месяцев назад
Sim, você pode fazer isso
@adilsonfeltrin4775
@adilsonfeltrin4775 Год назад
Do you have this for sale and what is its value?
@ГенрихШнипельсон
При отключении двигателя упали обороты, а мощность на оставшихся 3х нагревателях даже не шелохнулась, 😮 наводит на мысли...
@josueaparicio4342
@josueaparicio4342 Год назад
Cuanto me venden el rotor
@leonardocarrizo1519
@leonardocarrizo1519 Год назад
Y entonces qué sentido tiene todo este video si es secreto???
@luisvenegas1703
@luisvenegas1703 Год назад
excelente pregunta, lo mismo pienso yo, para què meter tanto miedo como si uno replicara una bomba atòmica.
@roscoweterw8422
@roscoweterw8422 Год назад
Entonces si dices todo menos el material del rotor no sirve para nada el vídeo , ni los planos , ni esquema . en resumen seguirá siendo secreto y no saldrá a la luz o bien porque tú trabajas para esa empresa o diseñaste , o trabajado y trabajaste en una oficina de potentes. Lo cual un disk like como casa
@WilsonSoares
@WilsonSoares 9 месяцев назад
All we need is an oscilloscope to see the waveform...
@zlatamarkovic6649
@zlatamarkovic6649 Год назад
@diakanua1
@diakanua1 Год назад
Cuánto cuesta un generador como este?
@luisvenegas1703
@luisvenegas1703 Год назад
Si ponen un video que supuestamente es secreto, entonces no es secreto. Esto ya era conocido y difundido por Nicola Tesla. Ahora que alguien haya comprado las licencias y queden en un cajòn es otra cosa. ¿ Para què difunden un video y meter miedo?Si en el fondo esto se va dar de forma masiva en algùn momento.
@yoymasltda3837
@yoymasltda3837 Год назад
Bueno y cual es la tu idea, que este equipo no haga estos videos....o la quieres facil....haz tu parte y no molestes, que lo unico que haces es hacernos reir a varios por tu enfoque....o quizás necesitas llamar la atención??...pase de largo Luchitooooo... que viene el lobo! ;) :)
@luisvenegas1703
@luisvenegas1703 Год назад
@@yoymasltda3837 esos videos son mentiras no te das cuenta que ponen despues del video la version completa para que te suscribas y pagues, imbeciiillll, ahì està el negocio.. replìcalo a ver si te va a resultar
@josemi8484
@josemi8484 11 месяцев назад
Si no desvelan la información para crear este sistema de energía libre. Mejor hacer uno con un alternador de coche por lo menos tendremos energía libre sin estar pendientes si lo desvelan o no.
@soyhenry4880
@soyhenry4880 Год назад
Dónde lo compro?
@d.g.a.service-hx3bn
@d.g.a.service-hx3bn Год назад
Ciao se pensate di vendere io sarei interessato
@BELOGSVLOGS
@BELOGSVLOGS Год назад
Can we buy this
@LuckasArtson
@LuckasArtson 10 месяцев назад
Spravte mi faktúru na firmu. Zoberiem si jeden motor
@dondon5007
@dondon5007 Год назад
En la era del gran engaño.
@metalmugen7801
@metalmugen7801 Год назад
Espero contesten mis interrogantes, gracias
@이영-h6e
@이영-h6e Год назад
Why do 3 magnets go in?
@θεοδωροςδραγατσης
based on the motor, it can't get 12000watt
@gonzalorodas8294
@gonzalorodas8294 Год назад
Cómo c puede obtener el rotor
@GedersonZeferinodaSilva
@GedersonZeferinodaSilva Год назад
Hola buenas noches, yo pensé en hacer con una pieza de aluminio grande y después mandar que un tornero le de el acabado.
@GeorgeSorosFDP
@GeorgeSorosFDP 8 месяцев назад
Amigo, Ja iniciou a fabricação do seu gerador, funcionou?​@@GedersonZeferinodaSilva
@GedersonZeferinodaSilva
@GedersonZeferinodaSilva 8 месяцев назад
@@GeorgeSorosFDP Ola bom dia, que nada, eu ainda não comprei o esquema deles. Complicado tu montar um projeto e por falta de detalhes não funcionar.
@ervinfilemon2858
@ervinfilemon2858 Год назад
NÉPHÜLYÍTÉS ÉS CSALÁS AZ EGÉSZ ! ! ! nem hiszek én nektek , mert nem a falvédőről jöttem ...MENJ A CIRKUSZBA EZZEL A HÓKUSZ - PÓKUSSZAL ! ! !
@СергейГординский-е5ы
N52 магниты подайдут???
@francofly1
@francofly1 Год назад
weeee......"amico"....ma chi vuoi imbrogliare?....al min. 14,30 e 16,30 si capisce l'imbroglio....stacchi la spina e il motore non cala??.......mentre al min. 16,30 spegni "la ciabatta" e il motore si ferma, e si SENTE che il motore cala si sta fermando......se davvero vuoi farlo, chiamami che ti faccio vedere come "elimino" la F.E.M. ISOLANDO IL MAGNETE nello spigolo dello stesso....così non hai quell'abbassamento di NM. quando metti un carico.......mi piacerebbe vedere e capire dove hai nascosto i condensatori e l'inverter.....ciao furbone...non incanti nessuno!!!.....P.S. ho parlato con chi di dovere, e mi hanno assicurato che NON ESISTE la lega alluminio e argento.....il tornio si impasterebbe
@jhonfrl
@jhonfrl Год назад
Srs,liberty engine gracias por jugar con las personas ke de verdad si keremos salvar este planeta ,ke si nos importa el calentamiento global, los que somos concientes de lo dañado y contaminado de nuestro planeta, que gastamos parte de.nuestro tiempo para ver y creer ke por fin alguien tubo las pel....s para enfrentar las grandes industrias extermi adoras de este planeta pero como siempre el miedo los vuelve exclavos de estas , pero algo si les aseguro algun dias vendra el robin hood,el batman,el airon man,el hombre araña,el super man ,o como lo quieran llamar llegara y dara la batalla para aser un mundo mejor
@bendimi3992
@bendimi3992 Год назад
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣😂😂😂😂😂😂😂😂😂😂😂😂😂
Далее
Gearless Magnet Bike
17:57
Просмотров 6 млн
Распаковка Monster High Potions №4
00:46
Просмотров 95 тыс.
Electromagnetic Aircraft Launcher
15:09
Просмотров 1,5 млн
Check out this GRAVITY-Powered Electric GENERATOR!!!
12:34
DID WE JUST DEBUNK THIS GENERATOR...!?
21:54
Просмотров 1,7 млн
High precision speed reducer using rope
20:19
Просмотров 1,7 млн
NEW INVENTIONS THAT ARE CHANGING THE GAME
23:36
Просмотров 28 тыс.
DIY Laser Image Projector (100ft+ Range!)
20:08
Просмотров 238 тыс.
Распаковка Monster High Potions №4
00:46
Просмотров 95 тыс.