Selecting A Brushed Speed Controller - ESC Terms to Know & Features To Look For - Holmes Hobbies

Подписаться 50 тыс.

Просмотров 131 тыс.

50% 1

The days of having to search through tons of brushed speed controllers to find the right one for you is behind us. The brushed ESC selection is much smaller nowadays which makes selection a bit easier, but you still be armed with the knowledge on what to look for. And of course you've come to the right place to find answers. John Holmes of Holmes Hobbies takes a look at some popular ESC's he has experience with and tells you what you should look for when picking a speed control for your trail truck, crawler, basher or other RC rig.
Want more RC Basics type videos? Let us know the topic in the comments!
PRODUCTS MENTIONED
HOLMES HOBBIES BR XL - bit.ly/2VT7w1K
HOLMES HOBBIES BR Mini- bit.ly/2B86K8z
See More Electronics Videos:
www.youtube.co....
FOLLOW HOLMES HOBBIES:
RU-vid: / holmeshobbies
Website: HolmesHobbies....

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 366

@ImprintImpressionzRC 6 месяцев назад

I have the quick run 1080. I have it programmed for 6V bec. I run a 35kg servo and it runs it along with my 6V servo winch and dig micro servo just fine. My rigs are trail trucks and not specifically rock crawlers although I do take them in creeks often.

@takenpictures 5 лет назад

Another great video, John! One thing that you did not bring up, the freewheeling function on the HW1080. It's item 15 in the programming menu Its default setting is disabled, but if you enable it, you can set your drag brake high enough to hold you on a steep incline and use the throttle to drive down the incline, without run a way truck syndrome. My typical setup is a HW1080 with a HH 13t Crawlmaster, on 3s. I pretty much only run 2 servos. The Savox 1230 and a Reefs 422HD. I've ran them with a BEC and without. Even without the BEC, I've never had a brown out and power and speed seem to be the same. Both of those servos have a stall load of 5A and I believe the 1080 has a 6A peak, according to a HW rep I spoke with. I'm sure for longevity, a BEC would be a good option.

@csj9619 3 месяца назад

Still using a old school esc in my 1/10 Tamiya VeeDub Beetle. hi-tec mosfet from around 1996.

@scale_nerd356 2 года назад

I run a Holmes Br-xl on 3s 50c running a team puller 400 and a Tekin T-440 and that esc puts out plenty of power on the big tf2 blazer

@joss67uk 5 лет назад

Ive been running Power HD WP23 servos with 319oz on your BR XL for around 2 years and on the Hobbywing 1080 for around a year on a SCX10 and SCX10II both on 3s, 1.9 wheels and both trucks are just under 7lbs, the 1080 gets warmer than the BR XL but its still only warm ad no issues.

@viccalzada8809 2 года назад

The hobbywing 1080 has a selectable internal BEC 6v or 7.4v, with the program card. More than enough for the servo i use. 17kg servo. PowerHD. I run it in my wraith set up with a 35t heavy-duty tekin motor. Love the hobbywing stuff.

@scottmele339 2 года назад

Absolutely love the 550 12t crawl master pro on my new Bronco with a 9t pinion gear. It's amazing!!

@B.wilk89 5 лет назад

Im running the quicrun crawler ESC with a Savox sv-1270tg servo H.H. trail master sport 27t and a winch and haven't had no lack of power but I'm not exactly sure how many oz of torque that servo has it was just on sale at my LHS and the guy recommend it so I went with it haven't had no issue I like the ESC just because the program card makes it easy to tune on the trail and play around with settings

@w2110 5 лет назад

What battery connection does it come with deans or what?

@derrickhentschel7340 2 года назад

GOT A TEAM READY SC480X AND A RADON 10T 5-SLOT IN MY EVEREST 10, THATS NOT REALLY AN EVEREST ANYMORE. BELT DRIVE WITH SUPER CONTROL LOW END. GREAT COMBO!

@humblerc841 5 лет назад

great info john, thank you. i have the brxl with a 27t torque master pro in my 10.2. it's perfect on 3s. my servo is a hi-tec 7955tg which is right around 300 oz/inch. i use an external bec just to be safe. overall i'm very happy with the electronics, although a may upgrade to a stronger water proof servo.

@rccrawler76 5 лет назад

I have the holmes hobbies esc that you are showing in the video (great esc),i also bought a 30 turn brushed motor it stopped working I sent it back for warranty work,when I got ti back I put it back in my bomber and used it for about a half hour then the commontater came apart ,I just gave up on it

@HolmesHobbies 5 лет назад

You check the heat while running ? Bombers are pretty dang hard on 540 brushed motors if not geared just right. I would be willing to trade towards a 550.

@rccrawler76 5 лет назад

HolmesHobbies I know they are lol!I put a two speed in it for that reason,I only use it for crawling,I love the power of your motors.I would be willing to do that!! how do we go about it ? Thanks for replying that’s very respectable of you

@rccrawler76 5 лет назад

HolmesHobbies the motor only get mildly warm I constantly check that while I’m running it, I am presently running a 45 turn integy motorwith no issues

@HolmesHobbies 5 лет назад

@@rccrawler76 Such a slow turn motor would be more apt to not overheat. Especially with a two speed! That is likely why the 30t didn't last.

@HolmesHobbies 5 лет назад

@@rccrawler76 send a message to warranty@ . Since it's likely the two speed that caused it, maybe we split the speed that you are currently running and try a 27t 550 Trailmaster. Let Justin know in email I would like to send you one.

@baxrok2. 4 года назад

I'm trying the BR Mini at 3s in a 4.6 pound rig. Mainly for friendly comps. Looking forward to testing it out and seeing how it performs!

@ddavidson0404 Год назад

How did it work.out for you... I just got a truck with the br mini in it without a external bec and it shuts done sometimes on me and the lipo is st 63 percent...

@tommygunn63 5 лет назад

I use a Hobbywing Quicrun WP and it powers my PowerHD LW-20MG(no external BEC) just fine when the wheels get in a tricky spot.

@ManuelOrtizification 3 года назад

What i generally look for in an ESC is the "hobbywing" writing on the case 😂

@STP_RIDGELINE 4 года назад

I luv running the BRXL it has never failed me and I like to run a servo @ 400oz of torque or higher but when money is funny lol I'm reduced to a cheaper servo

@StubbsRC Год назад

900oz-in 🤣 direct power 3s. Bound it up the other day and it just snapped the track bar mount right off the shock tower😳. Time to go SOA. Ooof-ta

@jamestowne1481 5 лет назад

I’m running the hobbywing an I have the hitec 7995 tg servo in my 10.2 an had it running off the esc at 6.0 volts but got a castle bec an running it off that made it a little more faster not much but some . Other than that I love the set up soo far . I’m also running a tekin hd 35t motor .

@bluboy3100 5 лет назад

Im currently running a Tekin RX8 gen3 and T8 motor sensored on 3s in my RR10 bomber, silky smooth and great drag brake.

@ShadeTree_RC 4 года назад

i just lmao ...longest screwdriver xD ....this won the internet

@johnroddy931 5 лет назад

Most my stuff is brushless but I got a new one cause I miss brushed but I use the hobby wing on 3s on one of your tm 550 with a handwoud from trinity 17t anyway love the set up use to use a mmp and the hobbywing is 1/3 the price and just as smooth in my opinion

@ryano8613 3 года назад

Here's a bit of fun. Remember the old AXIAL AE-3 ESC, OG Holmes BRXL 4s and the OG Castle sidewinders??? Well it was hard to tell them apart really strangely. So my old AXIAL ESC had NO problem running 4s all day with an AWESOME old Holmes Cobalt Puller 14t brushed motor as long as I had the castle BEC it worked great. And the old sidewinders could run brushed or brushless motors on 4s lipo also. Don't listen to the rules. Run it.

@Francis2001 5 лет назад

i'm planning to build my own electric skateboard and this video is very helpful to me i have many questions to ask you hope to do so after i start building it.be gentle with me i really need every instruction

@Bruce_Warren 5 лет назад

Very informative as always John, Thank You! I will be placing an order for a couple of your brushed crawler combos this month!

@Frank-st7ku 3 года назад

I have a 25kg servo in my redcat gen8 and I believe that equals 347oz inches of torque. Stock esc and the servo doesnt feel all that powerful to be honest, is that due to the bec not giving enough volts to be sufficient for my needs?

@jameshamilton5106 9 месяцев назад

I run a direct voltage servo on 3s

@johnbasterson7938 5 лет назад

I run 20kg (280ish oz/in) Jx or 25kg (350ish oz/in) DsServo servos with the 1080 bec. I never brown out. I prefer a light truck so I never need monster torque. Pretty soon here I'm grabbing a HH brxl and a crawlmaster expert 540 16t. So we will see if your bec will do! I'm sure it will. The jx is not waterproof but its 9 dollars. The DsServo is waterproof and is usually 13 bucks. They are so cheap and they just never do me dirty.

@4x4agsoverlandmexico65 3 года назад

Hope you can help me, I pulled my old Traxxas villain Iv boat. I plan to upgrade motors with the titan550. Wonder which esc can run both motors (boubleway/dual) and also can run with lipo. I’m new this will be my first time upgrades a rtt rc. Please help!!

@Sflhunter 4 года назад

You are using a glass dabber tool awesome boss

@HolmesHobbies 4 года назад

Glass work is one of my hobbies. I guess you could use it for that.

@thecarcollector8954 3 года назад

So i have an old (2001 nikko iron eagle) rc car that needs full replacement on the electronics, im just not too sure on what to get. Probably the most difficult thing is that it uses 2 large individual motors for the front and rear wheels and a massive servo for steering system.this has given me a better idea on what i need but i would like your recommendations on this

@michaelkeen8335 2 года назад

Hi want the best esc for 1/6 stuart tank please

@advancedtacmachine 5 лет назад

Do you have a guide on just the Holmes hobbies models? I looked couldn't find anything. Curious about the programming part of it

@brent042081 5 лет назад

Also same question for my 4.04lbs which I apologize was going to get the new Holmes hobby motor lol. The 8lbs rig tekin 35t is a good motor but still want to know if I need a bec. With the 80.A hobbywing esc cheerz.

@KTMcaptain 4 года назад

So do you think a mamba x should run an external bec for a 500 oz/in servo? I know it’s got an 8a rated bec.

@SuperTanglewood 5 лет назад

Great info. Thanks

@CarlosFlores-vv5wl 3 года назад

Need a good esc for bashing and handling high speeds i like to go fast and play for a long time hahhaha but want a durable lasting esc that can handle heat

@moosejawrc 5 лет назад

In my latest rig I have Holmes TorqueMaster pro 40T brushed Hobbywing 1080c esc CastleCreation 10c bec (programmed at 6.0) Reef's triple 4 servo. My concern is longevity with the current esc but also achieving a smoother initial throttle or control of SLOW crawl. Your Holmes BR-XL intrigues me if it will provide smoother transition from a stopped position to slow controlled crawl? Thanks

@troycampbell1851 4 года назад

What is the best esc for a scx24 axial (rubicon) upgrade?..

@davidrenaldo9429 4 года назад

I’m converting a 1/12 scale hbx protector to a dirt oval runner what would be a good motor esc combo motor must be 390 side cannot fit a 540 in the rig

@marvelrc5660 5 лет назад

Hi you can make a video on how to build your controller in the Rc4wd Moa or how to drive 2 motors with and how to connect them. I'm not clear how the division / connection ... quite clumsy as that works with 2 motors in unison ..... Train of thought ..... One controller to receiver slot 2 and the other to 3 or both controllers in receiver slot 2 so that both motors run in unison ... But how do I get both plugs in 2 ... adapter / soldering .. ... Mmmm .. ?? Thank you in advance

@HolmesHobbies 5 лет назад

use a 3 or 4 channel radio and use mixing to bias and control the two channels

@joshlaquerre3197 4 года назад

Hey John I hAve a old first gen mamba monster and I don't believe it's water proof. I don't care about warranty and what not because it's so old what can I put on the circut board to at least splash proof it with out killing it

@joshlaquerre3197 4 года назад

Or can I send it to you and have you guys water proof it

@joshlaquerre3197 4 года назад

@Lua Dipa thank you

@adamghiglia8668 5 лет назад

At least 400oz for me on crawlers. 500oz plus preferred.

@looprevil40 4 года назад

Hi John Im just picking up Rc after years away . I need help with running my Tamiya 1/10 scale car. I would like to run a 8t brushed motor in it for a bit of speed . Can u reccomend a ESC for this Tamiya set up plse. Regards Ian.

@abijithc.s3470 5 лет назад

What type of ESC will be needed for a combat robot?

@HolmesHobbies 5 лет назад

depends on the weight of it and top speed wanted.

@donaldsneffe 5 лет назад

4s on crawlers is exotic...

@reddeerrebelrc6674 4 года назад

Speed box

@clementinecrawlers2526 4 года назад

Hi John, I'm a new subscriber. I have an Axial scx10 ii RTR, I'm a weekend crawler with 11/64 tooth and stock brushed motor. What brushed motor and esc would you recommend? I am currently running 2s but I going 3s (max) soon. Thank you.

@HolmesHobbies 4 года назад

I'm a big fan of the 16t and 13t crawlmaster 540 motors.

@clementinecrawlers2526 4 года назад

@@HolmesHobbies Thank you

@nts323 4 года назад

Can you recommend a brushed esc that can handle a 8turn brushed motor?

@HolmesHobbies 4 года назад

brxl

@Cronicncars 5 лет назад

I have a great idea for you. You have the best esc for the design idea I have. How can I contact you. I'd like to see it get produced would be a great add on.

@rcintro1489 5 лет назад

Hi John please I need your help! My TRX 4 was broken for months everything fried. So I wanted the best, your company told me to buy a BRXL and Crawlmaster 10t I had no clue what to buy. Now my cheap 20kg servo has no power. My stock SCX, Red Cat and other TRX4 have no problem running that servo all with light kits. Your company now told me I need a BEC. How can that be? I spent over $200. And the worst part is I thought maybe the new servo was bad and with crippled hands spent 4 hours putting another new 20kg in only to have the same result. And it also has been going into neutral which I just found out can happen possibly. Please tell me there is a way to fix it. I do have a castle link. Thank you

@HolmesHobbies 5 лет назад

A BEC is always a good idea, and sounds like what you might need. The lack of BEC is likely what fried your stock ESC as well. Although it might have provided more power, that is a lot of load on stock internal BECs and they don't do it for long.

@rcintro1489 5 лет назад

@@HolmesHobbies That is very disappointing to hear. Hoped mine was defective. Wish the description for the BRXL didn't say "switchmode BEC delivers unbelievable servo power at any input voltage." Thank you for responding. Buying another motor from you this week.

@HolmesHobbies 5 лет назад

@@rcintro1489 Back when I developed this ESC, it was enough for all the servos on the market. 20kg is right on the cusp, but lower quality servos are quite amp hungry and need twice the amps of what we had (that cost a lot more) back then as well.

@HolmesHobbies 5 лет назад

@@rcintro1489 I think we can work something out to get you running. Can you solder?

@rcintro1489 5 лет назад

@@HolmesHobbies Ahh that makes sense. I know you're truly are a pioneer in the crawling world. I can solder but don't do the neatest job. I just ordered a helping hand thing cause the nerve damage in my hands has limited everything I can do. And was planning on ordering a BEC but now after watching some install vids I wonder if it will be a problem with the Y splitter for my sound kit since you have to disconnect the positive ESC wire. Thanks for helping John in anyway possible.

@AdamTerlaje 3 года назад

Dingle hoppers

@jimmyoller8055 4 года назад

I'm still pretty new to r.c stuff so I just call it the thingamajiger that hooks up to the whatchmacallit and makes the doodad go

@sprather84 4 года назад

Great answer 💯 🤣😂

@matthewchin6454 4 года назад

Not even close. The confuser makes the pixies dance, then it starts choochin'.

@kaverixp8562 3 года назад

@@matthewchin6454 ahaha i see a fellow man of culture

@paulosrcs185 2 года назад

Bro bin into rc years I still use the same terminology as you 😂 🤣

@TUGASCALERS 5 лет назад

In Portugal the ESC is also known by Variator, there you go!

@wisenoise34 4 года назад

I'm running a hobbywing 1080 in a trx4 sport. Holme Trailmaster motor and a arrma notorious steering servo. At 7.4v the servo really does perform. Great videos brotha 👌🏽✊🏾💯

@fg3901 3 года назад

Obrigado!

@CarminesRCTipsandTricks 5 лет назад

*You'd have to pry my BR-XL from my cold Dead Fingers!!!* Seriously. It's an ESC that does EVERYTHING I ask of it. My Servos are in the 310-332oz. in. range, and I have yet to feel the need for a BEC!! 😎👍👍 That's not to say I never will. I only run 2S. Sure, I'd love to go 3S... But my non Budget of a Disabled Veteran will never let me..... It's my Cross to bear. Someday I'll be able to. John, I've always been a fan of your Products!! Mainly because you put thought and Pride into them. And they're just damn good Products. I've mentioned often, I'm a HUGE Fan of your TorqueMaster Pro, 30 Turn Handwound Motor. Just enough Torque and Speed when I need it! I'm not a Pro Comp Crawler... but that could change. I'm just really happy with what I've got! 😊 Carmine 💥⛽

@CajunManNick1980 2 месяца назад

Thank you for your service sir!

@ellertingvi 5 лет назад

In Icelandic it's called (Rafmagnsmótor hraða stýrikerfi) 😂🤣

@Boss-dr2zk 4 года назад

Okay you have the craziest name for it. And I thought "Fahrtregler" was strange🤣

@BlackAndBlueGarage 4 года назад

John, I admire your marketing approach; that being that you don't push your products so hard that it singles out everything else. I love that you're values are set on quality and personal experiences with the client. Maybe this is why we don't see your stuff in RTRs? All that brown nosing out of the way, I only want to buy motors from HH from this point on. Keep up the great leadership level action sir. 👍

@HolmesHobbies 4 года назад

I appreciate that! I aim to have the channel be for information and not marketing.

@StubbsRC Год назад

Same John. I spend so much time watching your videos! Still with all I know, I learn stuff from you. Will be picking up a snub nose for my lcg build. I want the weight savings of the snub nose but I'm not a fan of the outrunner screech. Do you offer any of your own ESC with a silent (kinda like blheli or silent assassin) tune?

@bluedominator650 6 месяцев назад

Hello, I have a RC car with a crystal 5 (RX) 26.740. The controller is missing. What controller can I buy, those programmable ones that I can use with this car? The car brand is Nikko, probably a 10 year old car, but I don't want the OEM controller, I would like to buy a better quality one. Can I remove the board and add a ESC and a receiver and salvage the motor and servo?

@johnnysix7162 5 лет назад

Remember the Tyco Typhoon? I lost one of those in a river. Had to be atleast 25 years ago. There was a shallow crossing roughly 150 yards down stream. Used to lose basketballs and other things, run down stream through the woods and be standing in the river waiting on them. The Typhoon went out of range of the transmitter and stopped responding. But that day the river was faster than I was, by the time I got to the crossing it was already passing by.

@martinneps9387 3 года назад

I have a monster beetle And The Brat RC cars what speed control would you put nam are used to use the super rooster and I used to put I hopped up motor in my super blackfoots and king Blackfoot please comment back thank you very much for this video

@camkels6396 5 лет назад

I eliminated the need for a BEC with the Holmes BLS SHV500v2 Brushless 12V. Runs directly off the battery.

@northhankspin 4 года назад

If we are talking scale, it's an ECU. Today on my scx2 I mean jeep cherokee I replaced the engine, steering box and ecu.

@AL-ud2is 4 года назад

haha, like it

@micaaelnunnm82a1 4 года назад

I was crawling with my TRX 4 tell off of a 50 foot cliff into a waterfall had to go swimming for it probably 15 feet down

@remkojerphanion4686 5 лет назад

Interesting video. For my RC boats, I use ESC's with a minimum of 50% extra current handling capacity. For example, a motor that may pull a max of 60A, I will use an ESC rated at 90A minimum. Peace of mind comes at price, but at it works for me.

@jahmenrcbuildingasone4254 5 лет назад

You my brother are a fountain of RC knowledge👍🤙

@JAllredFishing 2 года назад

The big craze today is using an ESC to control the speed of a trolling motor mounted on a kayak. There are many videos out there using the Hobbywing 880 and a servo tester to control the direction and speed. I purchased the above products to build my own, but the ESC voltage input wires are16 gauge. My trolling motor can draw up to 40 amps, so I am concerned about connecting an 8- or 10-gauge wire to the 16-gauge wire and cranking the motor up to draw those high amps for a period of longer than a few minutes. Is my thinking correct? Thanks for any input.

@goldsoundz5393 5 лет назад

I've eliminated all my external bec's by using spektrum S6230 servos. 6v max, 311oz-in torque. Amazing servo, I highly recommend them.

@jahmenrcbuildingasone4254 5 лет назад

Is there anyway you could put a link tocthose servos up?

@goldsoundz5393 5 лет назад

@@jahmenrcbuildingasone4254 here's the link... www.horizonhobby.com/s6230-digital-surface-servo-spmss6230

@jeremybaity7002 5 лет назад

That HW1080 seems to work great for me. I have it on my cheap Everest 10 and take it through the creek in my front yard all the time. And yes I have had to kick off my shoes to rescue a few time. Being down south does make this possible 10 months out of the year. Have a great day

@joeboisselle6856 3 года назад

Very new to rc . I'm building a crawler . I started with a 1st Gen rgt . Yup I am . Now I'm doing motor and trans . Did servo and axles . I'm going to stay with the 7.2 v batteries . I have a 550 55t motor. Need to do the esc now . Before I put my body on . What would you recommend ? I would also like to change the radio and reserver too some day . Or is there a package that I could get . Last ? . When does your build stop being what it started ? Not much left of the rgt when I get the body on ..thanks .. I'm also new to the hole you tube stuff . But I do have a couple vids . You should see them . I build stuff . This rc is the next thing I'm building.

@HolmesHobbies 3 года назад

hobbywing 1080 is the budget choice still. BRXL is the US made smoother choice

@joeboisselle6856 3 года назад

@@HolmesHobbies thank you for getting back with me . This is my new hobby . I build a full size Jeep crawler . Did real good with it . Just can't get around like I used to . ( Disabled ) would you mind if I ask more ?s if the need arises ? There's not a hobby shop near me . I need to start going to swap meets . Thanks again .. real nice of you .

@HolmesHobbies 3 года назад

I do my best to reply , but sometimes there is a deluge of comments that bury questions.

@CajunManNick1980 2 месяца назад

I have the Hobbywing 2 in 1 Fusion SE. The internal BEC is switchable from 6V-7.4V and it works great for me, though you would need to run 3s to maintain consistent voltage when running on the 7.4V setting. Found that out when I swapped to a telemetry capable radio on my TRX4.

@Dazed1Hobbies 5 лет назад

Watched an ae5 crap out and take off over the side of a 30 ft quarry wall into a swimming hole.he fished it out with rope and the claw of a hammer. I had a 1060 running reefs 422 at 6v. Had no issues running 3s.

@Hondadude87 5 лет назад

Until recently I was running the stock ae-5 esc 3s 35 turn with no issues on a 12+ lbs rig. I’m currently upgrading it with 12v servo, hobbywing 1080 and 13 turn 5 slot motor.

@KnightenDaise 2 года назад

Yeeaaaahhhhh...... So, back when I had my first XMaxx (before the "waterproof" versions came out) I was up in the mountains near Seattle at Snoqualmie Pass. Went to the X-Country Sno-Park to play with my rig, right? Was rippin' it around on the trail, sent it up, it caught a rut in the snow, hooked hard left and LAUNCHED INTO THE VOID.... 😂 Finally touched ground and cartwheeled the REST of the way down the embankment and into the ice cold creek. Took me a good half hour to fight my way down through all the fresh powder, grab it out of the water and then get the both of us back up. 😂😂😂 Brr.

@mraltoid19 2 года назад

When I started the hobby I called them "Car Brains", then logically when to "Motor Computer"...now I call them ESCs....like aa normal person.

@STP_RIDGELINE 4 года назад

Hey John I have a problem my 1080 esc is overheating i am using it with the trailmaster sport 550 27T thats never happened before so my question is if my savox sc-0352 90.3oz of torque @ 6.5 is bad could it be overheating my esc ???

@jenslothert7129 3 года назад

I bought my first traxxas trx-4 Bronco 2021 and will run the original ESC from traxxas. Off course with the original traxxas BEC and the original 400 oz traxxas servo BUT i make one essentiell change on it and that's a holmes hobbies TorqueMaster Pro 550 21t and it transform the whole rig to an other Level. Awsome Motor. I use nearly only HH Motors in my 16 rigs and mostly with an HW1080 but this is a great combo. If the traxxas ESC will die, i put in an HW1080 also. But for now it's an great choice and drives awsome.

@iceman71625 2 года назад

Love your video very informative.... Kind of new to rcing and was given a monster truck looks to be around 8th scale and want to up grade and this video of all that i seen lol is the best and now i can finish KONG as i call him... Thank you again love it👋👋👋👋👋👋✌✌✌✌🎉🎉🎉🎉🎉🎉🎉

@cancerix1700 2 года назад

If this was supposed to be a video for beginners, well, turns out it's not. What is 10-scale? What is drag break?

@adityasandy7638 2 года назад

Hi, thumbs up for great explanation. but i hv a question. i be been using hobbywing 1060 for 2 different motor. one is 370 27000 rpm and the other one is 370 50000, running on 2s 3000 mah 60c battery. why the high rpm motor is easy to everheating?

@hirevinrs4 2 года назад

Can I use a brushed esc (like the ones shown) on a 1/10 on road touring sedan? I have an old hpi rs4 rally (belt driven) chassis I want to revive. I’m not too concern about speed just smooth acceleration, I’m just worried I might snap a drive belt with brushless power since it’s close to impossible to get replacement drive belts for it.

@regularmen2969 5 лет назад

Helo please for help im buy 60a ESC Carbon Brushed ESC but is is write on IT ni-ha set but i'm wona usage lipo batery im wona ask IT is good seting ? Im hawe model wpl c24 upgrade 360 motor ? Please answer my question gretings

@TheCleaner6969 Год назад

I run separate 6 cell Ni-MH for each esc which happen to be Novak Super Roosters along with 2 - Hi-tec HS-5645MG servos. Since I bought your crawlmaster pro motors & did away with my 66:1 reduction units my 1:6th krawler does not hold. I'm using the smallest pinion which is 11T & I'm looking for a way to hold like it did. What are your recommendations?

@TheCleaner6969 Год назад

I'm also using a non-digital stick radio (which I need stick & at least 4 channel if not 8) I'm not sure if you need to change the radio out. I see a lot has changed since the early days.

@jmcfly42 2 года назад

Hello my friend, First of all i want to tell you that I am a fan of all your articles, servo, motor, esc, etc... and I equip all my crawlers with your equipment. Could you help me with some explanation for programming my mini dual brushed esc please? thanks

@crawling86 2 года назад

Please help me sir. Remo hobby 1/10. Ecs went bad . Got new 1060 brushed esc. How the heck do you bind it. Absolutely no good videos. Is my radio transmitter 2 cheap or what is the deal why is this so hard art in all the videos they don't show you the tools and stuff that you may need

@rileykairc 3 года назад

I run the 1080 ESC with a 36kg servos lights and whinch works fine even with the 550 crawl master pro it's a fantastic set up easy to program it's what I have in all my crawlers rigs

@juniorgarcia214 2 года назад

Hello I’m new to the rc game and I have a scx24 that just currently fried up and I found out it was the receiver and esc and I’m looking for a replacement but don’t know exactly what I need… Just wondering wear to go because the original is on backorder everywhere thanks

@10feetup 2 года назад

Found this video when i was looking at the Hobbywing 1080, my TRX4 is 9 days old, and has fried the Traxxas ESC already.

@kadensvatko8583 2 года назад

I built a WPL c24 truck all Metal upgrades put about $230 in it and ran a esc out of my Traxxas Bigfoot for about a month worked excellent

@devinhoepner2107 3 года назад

I’m running a quick run 1080 with a savox sw-1212sg and so far haven’t had any issue they claim the servo puts out 600 oz but I doubt those numbers are true

@andrewupsidedown 2 года назад

Will a 1080 be ok with a torquemaster expert 550 27t wanted a br mini but have not been able to catch them in stock

@RR-ho5ek 2 года назад

I am running a Novak timbuk tu brushless system in my wraith on 2S. It can crawl anything, if you can't crawl on 2S, your doing something wrong.

@jonathanmackey502 3 года назад

I like the power of 7.4 volt but having trouble finding a ESE that can handle the power most ESE like 7.2 but don't get the burst like the 7.4 or 2 s batteries.

@nickvance3728 2 года назад

Motor limits. What the lowest motor limit or highest on what voltages. 2s,3s,4s etc. I feel it’s a common issue for heat or burning the esc up. Thanks.

@jasonarthurs2514 3 года назад

hey good day i need help plz,. i have a JLB cheetha... I had all plans to run it yesterday but i was out of luck... i have steering but no throttle.... so i said let me calibrate it. but whenever i hold down the set button and turn it on it doesn't go into calibrate mode. it just turn on like normal.

@LeBlanc10 2 года назад

Also used to run the 1080 on my vaterra twin hammers abs that worked really well back then but it did not come with the program card then so I can't say for sure what all my settings were.

@aegixxer1 5 лет назад

I'm running a savox 1230sg on one rig and an mks hv777a+ on another with 1080 esc. The 1230 is set at 6v, the mks is set at 7.4v. I'm running a spektrum radio and have not experienced any brown outs. I do prefer an external Bec but the 1080 has proven to be pretty robust.