Sensor Cleaning Nikon DSLR DIY 

i know im asking randomly but does anybody know of a trick to log back into an instagram account? I stupidly lost my login password. I would love any help you can give me.

@Garrett Cristiano Instablaster :)

@Donald Brayden i really appreciate your reply. I got to the site through google and I'm waiting for the hacking stuff now. I see it takes a while so I will get back to you later when my account password hopefully is recovered.

@Donald Brayden It did the trick and I actually got access to my account again. I'm so happy! Thank you so much you saved my account !

@Garrett Cristiano you are welcome xD

Hello Stivos, obviously the hair is in the viewfinder system. Be aware that the screen, which you can see when you remove the lens and look upwards into the mirror box, can very easily be scratched. If the hair is on the lower side of the screen you may be able to reach it with a tweezer and remove it. Do NOT touch the screen. If the hair is on the upper side of the screen, I recommend a pro to remove the hair.

The Dust Patrol Okay thank you very much🙏🏽

I assume that the insect is in the viewfinder system. If you can see it clearly in the viewfinder, it may be on the top of the screen, the side of the screen that faces up and you usually can't reach,. Before you try to remove the insect, be aware that the screen is very, very, very sensitive to scratching. The screen has a little nose to hold it. This nose my show to the front or to the side and it is small. Don't touch the screen anywhere else. The screen is hold in place by a spring, more like a metal bar, at the front of the mirror box. The spring is hiding behind the light baffle foam. You need a v-shaped tiny tool to push the spring back over the black post that holds it. Lay the camera on its back to do this. Be aware that there may be distance plates under the screen to keep it in the right position. After loosening the spring, you can grab the screen carefully at its nose or you can turn the camera a little bit forward so that the screen will flip down. If you can see the insect on the screen or in the viewfinder system, use a blower to remove it. Don't blow strongly. And again, do not touch the screen anywhere else but at its nose. If your camera has distance plates, put them into position and then put the screen back into position. Lift the spring back over the post to hold the screen in position. We may make a movie to show how to do this at some time.

​@@thedustpatrol7515 Thank you ! Please make a video , it would be very helpful ... yes the insect was in the viewfinder , i didn't know what to do , i cleaned the camera using " Clean Image sensor" mode and a bulb blower , afterwards I couldn't spot the insect again , but to be sure the insect is not active in there to poop around i placed the camera in a cardboard box along with a electric power mosquito device which works with chemical tablets, that was my idea , don't know if it was a good one , if the insect died by the chemical then it is probably still in there , if you like put that method in mind as well if you want to use it for your video , thank you again for your advice , personal time and videos !

If you can see it in the viewfinder, it is in the viewfinder system, not on the sensor. It will not show up on pictures. Very likely it is on the screen which you can see after having removed the lens. The screen is on top of the mirror box, you can see it looking to the top inside the mirror box. Do not touch the screen, you can scratch it very easily. If you can't blow it away, it may be on top of the screen. The screen can be removed and cleaned, but without experience you may end up with a damaged screen. If it disturbs you very much, though not showing up on pictures, I recommend letting a professional repair man remove the hair out of the viewfinder system.

thank you VERY MUCH. good advice.

Try blowing the mirror box with a hand held blower, NOT CAN AIR.

If my sensor has small fungus on the sensor surface what should I do?

@@trishlizkat16bpi64 Is the mirror box that Fragile that I can't used the canned air?