What does "service required" mean?
Have you seen the "service required" message on your DynaGen controller and wondered what it means?
The DynaGen controller has a built-in engine timer that keeps track of the total hours on your engine.
Another timer keeps track of the engine hours since the timer was last reset.
This handy feature reminds you to change the oil or perform any other service. But remember, it does not know the condition of your oil. It is a handy timer to ensure you don't exceed a set number of operating hours.
Once you reach the set time and change your oil or perform any other service, you want to reset this timer, and this is how you do it.
To reset the timer, follow these steps:
1. Turn the generator off.
2. Press Enter to enter the menu.
3. Scroll down to "timers" and press "enter."
You will now be asked for a password. The default password is four zeros. For some of our customers, it is the last four digits of your controller serial number. You can change it later if you wish.
Here, I'm entering zero four times.
Once it has accepted my password, I can scroll down to the "MAINTENANCE" option and then to the "RESET COUNTER," select "YES," and press "ENTER." Now, I'll back out of everything until the controller resets.
That's it. It will start the timer from zero and remind you again at the next service interval.
I can now restart the generator, and the message is no longer showing up.
We have other videos that cover different functions of this controller, so be sure to give us a like and follow. You can also visit us at www.AuroraGenerators.com
Thanks for watching; see you next time!
8 сен 2024
