Good day sir, i just want to ask an advice from you. I have the same model of your last blower (yellow green). It seems to stop every 20- 30 minutes of usage but after 3-5 minutes of rest, it turns back on again. I wonder what could be the problem with our blower. We use it to inflate our inflatable bouncy water slide. I hope you can help me. Thank you so much!
Not a problem. Both the commercial blowers should run 24hrs but at times they will shut down either from over heating or just wearing out. If you mean more speed as in power the metal blower is a 1.5hp blower and the middle one is a 1hp blower. The bigger the hp the more power there for more air. Hope that helps
The Fletchers Thanks for the quick response! Which brand, if any, would you reccomend for a plastic 1.5-2hp horsepower (mainly looking for a longer motor lifespan that can withstand 24 hours runs?
@@jhonatanduarte158 Not a problem at all. I recommend going where i use to get my castles to www.ajluk.com/ You can ask them anything and they will be able to help out more with info. Can i ask what you need to run for 24hrs a day please then i may be able to help with a blower type
Hi mate nice video. The yellow and black 1hp, how loud is that? I’m wanting to use it with a domestic bouncy castle which is quite big but doesn’t have lots of bounce
Hi if you use the 1.5hp blower that should be plenty depending on the size. If it is a big ish castle you will hardly hear the blower once fully inflated
Hi. I bought used bouncy castle 10x12 with 1.5hp blower. For some reason it takes power of 1700w. Usually 1.5hp blower is only 1.1kw. Can you tell if this is, just old one, that is why takes more power with less hp?
I think mine might be over heating but it was fine last night for over 30 mins when I first tested my bounce house and today it lasted not even that and started turning off on me 😓
Hi sorry for a really late reply. RU-vid is not great for showing all comments straight away. Is there enough airflow going through it and have you checked inside at all?
I have a swiftech blower model T-2E if you don't know what it is. It's 400watt but I wanted to change it to 900 watt. So is there a way you could do a video of how to do it?
@Exploring With Dark Dreamz the messing around part is a pain yes and would make more sense to buy another but you can get motor's that are the same size that are more powerful.
Hi i need advice 😔 i dropped our blower and now it wont blow it makes a humming noise.. its to a waterslide but i cant find a replacement. What should i do?
Hi not a problem could you send me a photo of the blower. I'm guessing it will be a 1.5hp blower if its for a commercial waterslide or tell me which one it looks like in the photo for this video
@@Fletchers1 foshan shunde huawei air blower....thats what it says i couldn't post a picture and it has the same screws are the yellow blower u have .i cant open it😔
@@ivettebellinghausen3007 Not to worry at all. try and fit something through the intake and see if the fan spins. If it does its probably the motor in which just easier to buy a new one. If it doesn't spin try freeing it up and try starting it again
You probably could for all of them but it would be a pain and you need to take in to factor if the fins would handle more speed without self destruction.
