This is a quick guide to show you how to set up H|CLASS™ E10 for sewing, showing winding the bobbin, threading and sewing the first stitch. It can be applied to other mechanical sewing machines too.
Does somebody knows if we can use METAL BOBINE to be installed inside the machine. This is a important information lacking in most of sewing machines descriptions.
My machine won’t go into any other stitch except A. The dial will switch around and I want C (zigzag). Once selected and I try again it is still straight stitch.
Oh sounds like something mat be jammed. You could try running the machine without a needle or presser foot on. As it’s running keep changing the dial to all positions to see if the needle bar starts swinging. ( for about 5 mins)If it does not, you may need to take it to your local service centre.
Any idea why the needle threader would stop working, the machine works fine but the needle threader doesn’t work anymore. Same machine. Thanks in advance 😊
I’ve found it so difficult for service & parts where I live, the timing went out shortly after too & I couldn’t use the machine at all. Eventually my husband managed to fix the machine. I then bought a manual threader from a haberdashery shop, I’m happy with that now. The hook is so fine, it could easily happen again so I’ll stick with it & eventually look for a new machine. It seems this one wasn’t built very well in the first place as it’s worked better than it ever did since my husband has worked on it. Thank you for your help though
When I start a stitch, the feed dogs don't pull the fabric, I have to hold the two threads and pull them in order to make the fabric move, and even then, I have to use an awl to push the fabric. I have searched high and low and there are no fixes for it. Makes me not want to sew.
