No video :(

SETTING OUT - How to do Resection using a Total Station. Step by step guide to orientate the EDM.

Подписаться 20 тыс.

Просмотров 13 тыс.

50% 1

SITENG-Setting Out #5 "Resection" In today's video I am showing how to do a Resection using your Total Station. Step by step you will see how to establish location (orientate) the EDM.
JOIN the best engineering community 👍👍👍 SUBSCRIBE NOW!!! 👍👍👍
leave the THUMBS UP!!! Follow the LinkedIn page 😁
LinkedIn: / siteng
/ greg-stepien-7346ab183
Subscribe: www.youtube.co...
👷‍♀️👷‍♂️ EVERY GOOD CIVIL SITE ENGINEER MUST HAVE - watch the VID
👉 • 10 MUST haves for CIVI... - items I use and recommend 😁
SAFETY BOOTS-choose your size ⬇️⬇️
👉 amzn.to/3NfjUCJ
👉 www.screwfix.c...
TAPE MEASURE ⬇️⬇️
👉 amzn.to/3xQ3cEf
👉 amzn.to/3xZ9ykM
TAPE HOLDER ⬇️⬇️
👉 amzn.to/3NzLDOV
👉 ffx.co.uk/prod...
CALCULATOR - sometimes you can find them half price in Supermarkets 😁⬇️⬇️
👉 amzn.to/3u2hHE6
DRAWING FOLDER ⬇️⬇️
👉 amzn.to/3NqYoeA
👉 amzn.to/39OUNZP
NOTEBOOK - get whatever really to take some notes 😁⬇️⬇️
👉 amzn.to/3HQkbLx
PENCIL - 0.7mm - good price, but for this colour 😁⬇️⬇️
👉 amzn.to/3OlvwW3
PENCIL - 2mm ⬇️⬇️
👉 amzn.to/3QHVIff
JOINER'S PENCIL ⬇️⬇️
👉 amzn.to/3xRIaFl
TIPP-EX - these are the best I used ⬇️⬇️
👉 amzn.to/3QNrKGH
PERMANENT MARKERS ⬇️⬇️
👉 amzn.to/3ykpcZv
CHALK LINE ⬇️⬇️
👉 amzn.to/3A0aUOY
👷‍♀️👷‍♂️FEW EXTRAS I USE TOO 👇
SMALL SPIRIT LEVEL - you can always borrow from a Chippie if needed 😁 ⬇️⬇️
👉 amzn.to/3OEXs79
KNIFE ⬇️⬇️
👉 amzn.to/3HQKUrl
GLASSES - Despite you will get safety glasses, on some sites they’re really low quality and I don’t want to get my sight worse using them. Fortunately it’s a rare situation :)
👉 amzn.to/3nawPeN
👉 amzn.to/3yhMMWM
GLOVES - I got them first on one of the jobs and I use only these from then 😁⬇️⬇️
👉 amzn.to/3bvldjC
-IMPORTANT-
Some links in the description may contain one or more affiliate links for items mentioned in my videos - the items I personally use and recommend. You will support my channel if you use these links, as I will get a small commission of the sale. The price is exactly the same without the link, but this way you will help the continuous growth of the channel. Affiliate links are primarily Amazon.
#civilengineering #siteengineer #constructionuk

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@user-wl2py2lq7v Год назад

you are simply the best Engineer(Teacher).😍

@SITENG Год назад

Thank you!!! 👍👍

@jayganesh7167 4 дня назад

Thank you so much sir for your videos. Really useful for me. I learn all Leica manual Total station from your videos and my Institute. Now i ready to use TS-03, 06,07,09. Still i not learn TS-10 and robotic.

@SITENG 4 дня назад

Thanks, yeah more and more robotics now in construction TBH, but once you know manual station well it shouldn't take you much time to pick up the robotics

@jayganesh7167 День назад

@@SITENG yes sir. I saw your Ts-16 video too. 16 has little more options extra. Thank you so much for your information sir.

@Piotr-yh5wb Год назад

Bardzo dobrze się Pana ogląda! Brakuje takiego kanału na polskim YT. Pozdrawiam!

@SITENG Год назад

Dzieki bardzo, rowniez pozdrawiam i milego ogladania. Myslalem zeby tez po polsku zrobic, ale narazie crazy busy :)

@markthomas2168 2 года назад

Thankyou, I’m learning 👍👍👍

@SITENG 2 года назад

Good to hear that Mark! Thanks for commenting 👍👍👍

@rasalih9200 2 года назад

Thank you so much engineer!

@SITENG 2 года назад

Thanks for commenting and always happy to help 😁😁

@yavuzcinar6487 3 года назад

Thanks for videos

@SITENG 3 года назад

Thank you for comment Yavuz!

@supermanny73 3 года назад

Great job. Thank you.

@SITENG 3 года назад

Thank you! Happy you like it :)

@ovieagbaga9505 4 года назад

Very impressive

@SITENG 4 года назад

Thank you Ovie :)

@TheMrasimqureshi 3 года назад

Excellent Greg. Just one major point in the video. Please SHOW THE SCREEN CLEARLY of the Total Station as we cannot see it while you are giving the instruction about the next stage. Secondly it was not clear as to how you set the limits of the resection limits. Does it matter if you don't set the limits of the resection value? I like the way you press the Side Measure Button to measure while looking through the telescope to save time and to stop making an error. Brilliant device.

@SITENG 3 года назад

Hi Asim! Good point :) It does not matter really as you have to decide if you're happy with the resection. It will just show you that you are out of your limits showing X in the box. I love side buttons too :)

@gameromg5312 4 года назад

Hi Greg very good work but can you make video when you are on site with just one TBS where you got XYZ and you working in your local coordinates?

@SITENG 4 года назад

Hi Gamer, there will be videos from the site soon, but for now I am not working with local grid. I will explain how to work with local in my videos, but you need to wait a bit :)

@jayganesh7167 4 дня назад

Sir, if i learn only all Leica total station is enough? In uk Leica is using mostly in building settingout works? Or else like (Sokkia, Trimble, topcon) Plz tell me Leica is enough or not?

@SITENG 4 дня назад

Leica should be enough, but sometimes they use other as well, but once you understand how Leica works you shouldn't really have a lot of problems with other kit

@jayganesh7167 День назад

@@SITENG ok sir. Now iam expert in Leica and beginner in Sokkia sir. My Institute send me some sites weekly twice. There I can mark columns individually with TS. I saw different types of works like topography work, contour work, F.F.L marking work. Seperating property into 2 by using reference line. Then topography using Dgps

@collinseze9532 3 года назад

Sir plz make video on how to establish control on new site

@SITENG 3 года назад

Hi Collins! Base control have to be provided by the client and than you do secondary control setting the new targets and surveying them (can see on my last day in life video :)

@jiaadbrraa2014 3 года назад

Hi bro.. I just want to know.. What is meannig of meesage"set accuracy limit" for possiton ; hight; angle when i want to set station..sorry my english languge is not good enought to decribe my simple problem.. I hope u understand me..thanks.

@SITENG 3 года назад

You just have to put how much accuracy you need etc. 5mm 5mm 15' and then when you do resection EDM will tell you if you're out of this acurracy limits, it's nothing important as EDM will tell you the error of set up anyways.

@constructionmypassion4699 Год назад

Which one is better station orientation or resection... What's your recommendation...👍

@SITENG Год назад

I mostly use resection, by orientation you mean set up over a point and orientate the station?

@constructionmypassion4699 Год назад

@@SITENG i mean station orientation via back site. Thanks for the reply..

@osmosisconstruction2825 2 года назад

the EDM screen is not visible enough, if you could make it visible that will be great

@SITENG 2 года назад

Thanks, I will when recording next time 👍👍

@tonymaguire9498 3 года назад

What co ordinates are you using and how do you add the height to the point

@SITENG 3 года назад

Hi Tony! These are 'given' points (control points), I will show this on next video where I'll show bringing the job to the robotic, hope you'll like it

@MrSteefn 3 года назад

Hi Greg, which is the most used total station out of these brands in UK-Leica, Trimble, and Topcon? Is it possible to work on Trimble if we study only leica? thanks. By the way, I checked out your website! looking good.

@SITENG 3 года назад

Hi George! I've never worked with Trimble, but once you know how EDM works it will be very quick to learn. I jumped from Leica to Topcon once and it was quick change (annoying at first though :). Website will be better, but I can't find time for it. If you can follow my site on LinkedIn please. I believe Leica is the most used in UK and definitely in London area and there is more and more companies using robotic ones now.

@MrSteefn 3 года назад

@@SITENG thanks for the information, Greg! Appreciate your help. Am already following you on Linkedin.

@SITENG 3 года назад

@@MrSteefn Thanks!!!

@aldojosecanelo9777 3 года назад

How do you measure coordinates of tapes?

@SITENG 3 года назад

Hi Aldo! I don't understand what you mean :) Do you mean retro targets?

@aldojosecanelo9777 3 года назад

@@SITENGI'm sorry. I'm from Perú, my English is not good :-( I want to know what is your method for to give coordinates (x,y,z) to RT1, RT2 and RT3.

@SITENG 3 года назад

These were known, normally I do survey to set/check new ones. I will soon upload a video where I am explaining more about this topic so I hope you will enjoy it :) Great to know someone from Peru is watching the channel :)