Setting Tension on your Handi Quilter longarm quilting machine 

I was able to take a class from Jamie a very long time ago . He must have been a new teacher but his demeanor was one of a seasoned pro. We had a blast!

My top tension is as tight as it will go and I have lots of nest on the bottom. I have done all the fixes several times, change needle, floss between tension disc, check the scarf on the needle, rethreaded the machine. What else can i do?

I have a Babylock Tiara. after adjusting the bobbin tension, I sew for a bit and everything looks good. Then suddenly, the bobbin makes a noise. I stop and take out the bobbin. The thread has slipped out of the tension slit and wound around the bobbin pin inside the bobbin case. What am I doing wrong?

This is Great video. Just wished you had different backing so we could see bottom stitching better. Thanks so much

When using the Towa bobbin case tension gauge, does anyone know what the setting number should be?

As always, your directions are very thorough and helpful. Thanks.

You are a lifesaver. Thank you for making this understandable for a beginner like me!

First you say the bobbin should lift to it's side, but not out of your hand, then further on in the video you say it should lift out of your hand. This is very confusing...

I have a HQStich710 + a Janine pintucking foot 9mm wide, I can't get it to work? HELP

B

It would be helpful to use a light colored fabric on the back too. I couldn't see what it should look like.