Setting up SimHub Arduino controlled displays [BEGINNERS GUIDE] 🤔 IT'S EASIER THAN YOU THINK!

Подписаться 24 тыс.

Просмотров 21 тыс.

50% 1

Here to help you get started with SimHub and Arduino controlled devices. I'll show you it's easier than you might imagine! If you liked this video, please hit the like👍 and consider subscribing. And drop in your comments below the video! ✅Subscribe to my channel here: tinyurl.com/yyhjua7h
PARTS LIST:
▶ Nano s.click.aliexpress.com/e/_ACaGt5
▶ MAX7219 RED DOT Matrix s.click.aliexpress.com/e/_AlX5mj
▶ WS2812B RGB LEDs bit.ly/3JLDEwe
▶ 12LC LCD 2004 s.click.aliexpress.com/e/_AUabsP
▶ TM1638 Module s.click.aliexpress.com/e/_9wYIX1
▶ WS2812B RGB 8x8 Matrix bit.ly/3JMxGeg
▶3D printed iFlag case STL model www.thingiverse.com/thing:473...
YOU CAN HELP SUPPORT MY WORK WITH A SMALL DONATION (THANKS):
▶ You can support me on Patreon: / simracingcorner
▶ Show your support with a Ko-fi ko-fi.com/simracingcorner
You can help support Sim Racing Corner by using my affiliate links. I will earn a small commission for products bought through the affiliate links, but it won't cost you anything! Thanks!
▶ Amazon (UK)amzn.to/3dNPW8d (US)amzn.to/2XEBgTf
▶ Banggood: www.banggood.com/custlink/Gmm...
▶ AliExpress: s.click.aliexpress.com/e/_A6He49
▶ eBay: ebay.us/SR8jmP
▶ Join iRacing using my affiliate link: www.iracing.com/membership/?r...
▶ Buy discounted game keys from my Kinguin affiliate link: www.kinguin.net/?r=60396
▶ Buy discounted game keys from my Greenman Gaming affiliate link:
▶ Follow Sim Racing Corner on Twitter to get notifications on new videos and other sim racing malarkey: / cornersim
💾EQUIPMENT I USE TO MAKE VIDEOS💾
▶ Camtasia video editor techsmith.pxf.io/c/3147906/48...
▶ Canon EOS M200 (UK)amzn.to/3yeGENu (US)amzn.to/3pFflIg
▶ Elgato Cam Link 4k (UK)amzn.to/34Togzn (US)amzn.to/3IeoAHy
▶ Logitech Brio Gaming Webcam 4k (UK)amzn.to/2DxRVPj (US)amzn.to/2zl24Ll
▶ Logitech C920 Webcam (UK)amzn.to/2OYHvcB (US)amzn.to/2KshPoh
▶ Razer Kiyo Pro (UK)amzn.to/3C6Faq1 (US)amzn.to/3A2Fog4
▶ Elgato Facecam (UK)amzn.to/3JIXF6M (US)amzn.to/3v5vz1B
▶ Rode NT-USB Microphone (UK)amzn.to/2OADN8Z (US)amzn.to/2PQuVBC
▶ Neewer Dimmable LED Video Light (UK)amzn.to/3EFe4Hw (US)amzn.to/3rNDSxu
▶ Neewer Advanced 2.4G 480 LED Video Light (UK)amzn.to/3DvhzyR
▶ RALENO LED Video Soft Light Panel (UK)amzn.to/3GuzNlX (US)amzn.to/3y6YCRJ
*As an Amazon Associate I earn from qualifying purchases.
#Simracing #SimHub

Игры

Опубликовано:

20 июн 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@SimRacingCorner 2 года назад

▶ Show your support with a Ko-fi ko-fi.com/simracingcorner

@mrj3217 2 месяца назад

Can I use one namo with the 8 by 8 led matrix with two left and right separate matrixs?

@katiedave1098 2 года назад

Fantastic upload will definitely try this thanks

@redonealpha710 2 года назад

Great video thank you. Looking forward to getting Into this In the near future once I decide what displays I want to make.

@SimRacingCorner 2 года назад

Glad it was helpful!

@schinbone0 4 месяца назад

Great video mate. Thanks for sharing your knowledge.

@SimRacingCorner 4 месяца назад

Glad you enjoyed it

@ianbarnes6266 Год назад

HIya, first off, what an amazing channel, im a newbie and youve helped me alot, sooo.... lol I have an RGB 7x8 matrix with 3 wires, problem is Im not sure how to wire it or use simhub as there isnt a 7x8 only 8x8 I have a stock of Arduino uno, nano and pro micro, if you could lend me a hand I would be very appreciative.

@taylorbertrim7625 4 месяца назад

Hey is there a way for it to show my current speed when entering pit road?

@Cevap05 3 месяца назад

If you set this up for lets say a button box, is the program SimHub required to be able to use it? If I brought it to another PC that didn't have SimHub, could I assign buttons like any other controller, or would that PC also have to have SimHub?

@mattguy7405 Год назад

Anyone know what size screws to use with with 3D printed iFlag case?

@bruno070691 Год назад

Very nice! If I want to use 2 display: one as iflag and another (ex: nextion) as lap display like the ones we have in the wheels I’ll need more than one arduino?

@SimRacingCorner Год назад

I don't know

@coxyofnewp 6 месяцев назад

I've got into sim racing to the point, where I moved up to a descent rig and this was next on the list.. And I love building stuff myself - so this is perfect for me and I'll be getting straight on AlliExp to get everything I need to build my ultimate button Box and Display.. Many thanks for this vid - given me great ideas and the knowledge I needed.. ALSO - I just looked back through your vids - a lot of stuff I need to watch - sub'd, like Not sure If I want to get a 3D printer just for this though, so you or anyone else know of a good place to get something printed to my design..

@SimRacingCorner 6 месяцев назад

There are 3D printing services out there that can do this for you. A quick Google search should come up with results for that. A cheap 3D printer will do the job, so depending on how much that costs for everything you need compared to a 3D printing service. It may be better value getting a basic 3D printer. Having one ends up being quite handy for other random bits and bobs too.

@brianluis6337 4 месяца назад

Hello everyone!! I don't know if anyone can help me. I have installed a ws2812b matrix and it works but the LEDs are disordered. I have tried the serpentine setting and it still doesn't show anything ordered. I don't know what else to do, I've searched and can't find anything that works for me.

@MaksAMD Год назад

Do you know why com ports would be blocked or not working even if trying to update? I can’t connect any arduinos to my oc :(

@knyte6426 Год назад

This seems the perfect place to ask. I want to wire a WS2812B LED Strip as well as a WS2812B 8X8 matrix, and was wondering if I can have them both run by the same Arduino? Do I just need to set one to like "D6" and the other to "D7" and it should work, correct?

@SimRacingCorner Год назад

Essentially yes. You can see I've done this in the video with one example.

@darinho23 Год назад

Gnd - gnd Vcc - 5v Din - d5 Cs - d6 CLK - d7 Così?

@SimRacingCorner Год назад

@@darinho23 Just follow what SImHub shows you, as I have demonstrated in the video.

@J273 2 года назад

Great video; I ordered and received a ws2812b today and works great. Would you be willing to share your 3D enclosure for it? Many thanks

@SimRacingCorner 2 года назад

Check vid description fella, there's a link.

@J273 2 года назад

@@SimRacingCorner Hmm i did look but can't see it now in the description but im sure it was there the other day when i watched the video.

@SimRacingCorner 2 года назад

@@J273 you're right, it's not there. I'll need to find for you. Hang fire, I'm not at my computer so I'll find it in the morning.

@J273 2 года назад

@@SimRacingCorner No problem, thanks very much

@SimRacingCorner 2 года назад

Here you go.... www.thingiverse.com/thing:4737578

@Smarty72 Год назад

Did you ever make the tutorial building the sim flag using a WS2812B and a Nano? I can’t find the video. Is it just three wires between the Nano and the matrix board?

@SimRacingCorner Год назад

Not yet, it's something in my list of things to do. Yeah, it's just 3 wires. And basically as simple as all the other stuff I run through on the table here.

@Smarty72 Год назад

@@SimRacingCorner thanks for the quick response. Just trying to put mine together now. Have wired the data cable to D4 and attempting to get it up and running with Simhub, but I don’t really know what I’m doing 🤷‍♂️ Edit - random button pressing has won the day - all up and running now, amazing.

@stuarthonda1 Год назад

Hello my friend,.love the channel !! I saw this video and was wondering if you could possibly help me out? I have a 3drap steering wheel, inside is a Arduino nano for the led's and a Arduino micro that is supposed to control the 58 functions of buttons, rotary dials etc. I didn't make the wheel I got it second hand, however it started disconnecting randomly until a few days ago it crashed my pc. I turned it back on but the wheel is not working. I had a little help from someone on Instagram and between us we've found that the micro board has been wiped clean. I do have the original sketch from the guy who built the wheel but I cannot get it to load back on. I have absolutely zero knowledge of Arduino so any help would be much appreciated. Many thanks Stu

@SimRacingCorner Год назад

Sorry, I wish I could help. I've only uploaded to Arduino's through SimHub, so it's a different process. There's going to be tons of videos tutorials on YT on how to upload sketches, though, so it shouldn't be difficult.

@Andy_Blob23 2 года назад

Whenever I click upload to arduino it says programmer not responding, do you know how to fix this?

@SimRacingCorner 2 года назад

Maybe if you don't select the correct Arduino, it may fail with this error. I haven't tried that, it's just a guess.

@darinho23 Год назад

Come colleghi la matrice con Arduino?

@SimRacingCorner Год назад

It's the same as the other devices I’ve shown, but you will need to solder wires onto the board.

@darinho23 Год назад

Ma della matrice, quella a più colori, non vedo come collegare

@SimRacingCorner Год назад

What do you mean exactly?

@darinho23 Год назад

La matrice che indica le bandiere e che cambia colore

@SimRacingCorner Год назад

@@darinho23 Yes, and? Specifically, what is the problem. Make it clear exactly what you don't understand?

@canadian2fur532 2 года назад

I’m about to dip my toes into doing stuff like this but the biggest problem is finding cases for this stuff, as I don’t own a 3d printer 🙄

@SimRacingCorner 2 года назад

I completely agree, It can be difficult to work with these displays unless you have a 3D printer.

@canadian2fur532 2 года назад

@@SimRacingCorner I’m pumped to hear the results of your “sound exciter” video. I was so close to pulling the trigger on Sim 3d’s pedal rumble motors but it’s from the UK and by the time it gets to Canada, Yikes! Are you a big fan of the Nobsound amps? I had bought one for my bass shakers but it never really put out the proper power but I’d assume it would work with the sound exciters no problem.

@SimRacingCorner 2 года назад

The Nobsound amps are fine when used with the appropriate shakers, and more than enough for these sound exciters. And of course, make sure the PSU being used with the amp is sufficiently powerful enough too.

@rubberonasphalt Год назад

3D print service is your friend. Find a 3D print file that fits your part, and send it to them and wait. My recommendation though is to buy an ender printer, but there is a bit of a learning curve if you're willing to put in the time + effort